Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Sheen
- Matte
- Type
- Acrylic Elastomeric
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
WS M7 creates a strong, solar reflective and UV resistant coating able to withstand and encapsulate and inhibit mold, fungi and mildew growth. WS M7 is engineered for both above and below grade applications. WS M7, when used as an interior coating, is ideal for livestock, food processing, agricultural, and medical facilities. WS M7 Elastormeric Waterproofing Membrane is an easy-to-use, liquid-applied, waterproof smart material formulated to cure into a seamless, heavy-duty, elastomeric coat to seal cracks and bridge small gaps. For larger imperfections, use Reinforcing Fabric as stated in the instructions.
- Features
Single product capable for waterproofing a variety of different materials providing a more economical alternative to current procedures/products
- Flexible at low temperatures
- Exceptional elongation properties
- Bridges gaps up to 1/16”
- High solids content
- Non-toxic and environmentally friendly
- Highly alkaline resistant
- Does not sustain microbial and algae growth
- Passed ASTM D4300 (Ability of Adhesive Films to Support or Resist the Growth of Fungi)
- UV, acid rain and mildew resistant
- Passed ISO 16929 (Plastic)
- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot scale
- Protects structure from chemical damage caused by salts and acid rain
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Uses
WS M7 becomes an integral component to the construction of any structure as it bonds to a substrate. Ideal for commercial and industrial use, WS M7 Elastomeric Waterproofing Membrane seals and waterproofs:
- Foundation walls/ ICF/ Magnesium oxide panel structures/ buildings
- Stucco and block walls
- Building materials (Includes magnesium oxide panels, wood, plywood, OSB, stucco, concrete, concrete blocks, galvanized steel and polyurethane foam)
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Coverage | 120 - 200 | ft./gallon | - |
Dries By (Full Cure) | 24.0 | Hours | - |
Drying Time (20°C, Recoat) | 2.0 | Hours | - |
Elongation | 310.0 | % | ASTM D412 |
Film Thickness (Dry) | 6 - 10 | mils per gallon | - |
Film Thickness (Wet) | 10 - 12 | mils per gallon | - |
Storage Temperature | 5 - 32 | °C | - |
Surface Temperature at Application | 5 - 35 | °C | - |
Tensile Strength (WFT 13 mills) | 130.0 | psi | ASTM D412 |
Viscosity (6 RPM) | 20000.0 | cps | - |
VOC | max. 23 | g/L | - |
Volume Solids | 55 - 65 | % | - |
Water Vapour Transmission (12 mills DFT) | 2.9 | perms | ASTM E96-80BW |
Water Vapour Transmission (3 mills DFT) | 53.0 | perms | ASTM E96-80BW |
Packaging & Availability
- Packaging
WSM7 36 x 5 USG pails on a pallet
5 USG pails
55 USG drumCaulking 12 cartridges/case
Reinforcing Fabric 12 rolls/case
Storage & Handling
- Shelf Life
Unopened, WS M7 has a shelf life of 12 months.