Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Fast Drying
- High Gloss
- Easy to Use
- Excellent Adhesion
- UV Resistant
- Lacquer Finish
- Easy to Re-coat
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Uses
- SC-71 is designed to seal, protect and create a “wet look” on concrete, unglazed brick or tiles and many other masonry surfaces.
- Perfect to seal and glaze stamped concrete and acrylic cement toppings, such as Westcoat Texture-Crete® or Westcoat’s waterproofing systems with a custom finish.
- Inspection
- Substrate must be clean, dry, and free of grease, paint, oil, dust, curing agents, or any foreign material that will prevent proper adhesion.
- Over previously coated systems, surface must be structurally sound with no peeling or flaking.
- Over sheet metal, metal should be bonderized, clean and free of rust.
- If galvanized metal is used, it must be free of oil and abraded.
- Moisture
- All concrete should be tested for moisture before applying a seamless coating.
- If moisture emissions exceed 5 lbs/1000 square feet/24 hours (ASTM F1869) or if the relative humidity (RH) exceeds 75% (ASTM F2170), contact the manufacturer before application.
- Preparation
- For concrete, the surface should be at least 2500 psi and have cured for a minimum of 28 days.
- Prepare concrete to a profile equal to CSP 2-3.
- You may mechanically profile by grinding or shot blasting.
- The concrete should be porous and be able to absorb water.
- Prior to starting work, test existing concrete slab for efflorescence, moisture and hydrostatic pressure.
- Vacuum surface entirely and ensure that any dust or contaminates are removed, as these will deter adhesion.
- As a topcoat for ALX™, MACoat™ or Texture-Crete®, apply directly over the textured surface.
- If texture has been left for more than 72 hours or it has become dirty, clean as needed prior to application of the product.
- Over previously coated acrylic deck coatings, prepare surface by scrubbing with a nylogrit brush on a floor buffer and follow by powerwashing.
- A compatibility test should be done.
- Over sheet metal, the metal should be clean, etched and wire brushed, if needed, to allow product to bond.
- Remove any mildew or algae using 50/50 water and household bleach.
- Rinse thoroughly.
- Mixing
Stir prior to use.
- Thinning
- The material may be thinned by adding up to a maximum of one quart of water per gallon, for the first coat.
- For best results, it is not recommended to thin the final coat.
- Coverage
- Will vary depending on the surface.
- Up to 400 square feet per gallon on a smooth surface and between 200-300 square feet per gallon on a rough surface.
- Applying Product
- Allow the primer or texture to dry completely before applying the product.
- This product can be sprayed, brushed or rolled.
- If rolled, neatly cut-in all edges with a brush and roll the center using a 3/8 inch to 3/4 inch nap, good quality roller cover.
- Be sure to spread evenly in a “V” pattern rolling in both directions.
- Apply the product thinly using adequate pressure to avoid filling in textured surfaces.
- In general, the product will perform better if applied in two thin coats.
- Dry Time
- For best results, allow the product 4-6 hours drying time at 70 degrees before permitting light pedestrian traffic or additional coats are applied.
- Allow 24 hours to cure before heavy traffic is permitted.
- Allow 48 hours before heavy objects are placed on the surface and allow 72 hours for vehicular traffic.
- Allow 5 days prior to any abrasion or chemical exposure.
- Clean Up
- Uncured material should be removed with an environmentally-safe solvent.
- Cured material should be removed mechanically.
- Limitations
- This product is designed for professional use only.
- Apply in thin coats.
- Concrete must be free of sealers, wax, or curing agents.
- Be sure to paper off any areas that you do not want stained.
- Will not hide imperfections or stains in concrete.
- Fast stain will stain concrete and can produce a mottled look. Colors and effects will vary.
- Do not allow any westcoat products to freeze.
- Read product specification sheets for every product you will be using before beginning the project.
- Stains are translucent and somewhat transparent.
- For interior use only.
- Caution: when mixed with acetone, product is extremely flammable
Properties
- Color
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 7.6 | lbs/gal | - |
| Flash Point | 34.0 | °F | - |
| Gloss (60Degrees) | 88.7 | - | - |
| Solids By Volume | 21.0 | % | - |
| Solids By Weight | 25.0 | % | - |
| Specific Gravity | 0.9 | - | - |
| Viscosity | 46.0 | KU | - |
| Viscosity | 105.0 | cPs | - |
| Value | Units | Test Method / Conditions | |
| Adhesion on Concrete (7day Cure) | 4.0 | - | ASTM D3359 |
| Foot Traffic (Over Concrete, 72°F, 1st Coat) | 20.0 | minutes | - |
| Foot Traffic (Sealed Surface, 72°F) | 23.0 | minutes | - |
| Full Cure (6mil) | 72.0 | hours | - |
| Pencil Hardness | HB | - | - |
| Reducer/Clean Up | Acetone | - | - |
| Sag & Leveling | 5.0 | - | ASTM D4400 |
| Tack Free (Over Concrete, 72°F, 6mils) | 10.0 | minutes | - |
| VOC Content | max. 600 | gm/l | - |
Technical Details & Test Data
- Chemical Resistance
Muriatic Acid (31.5% HCL) 1 Sulfuric Acid (50% H2SO4) 5 Sulfuric Acid (93% H2SO4) 1 Nitric Acid (10% HNO3) 5 Sodium Hydroxide (50% NaOH) 5 Bleach (sodium hypochlorite) 5s Vinegar (3-5% acetic acid) 5 Transmission Fluid 5s Gasoline 1 Brake Fluid 5 409 Surface Cleaner 5 Pine Sol Solution 5 Blood & Body Fluids 5 Iodine Solution 5 Mustard 5s Ketchup 5 Red Wine 5 Acetone 1 Methyl Ethyl Ketone (MEK) 1 Xylene 1 Ethanol 5 Methanol 5
Key:
- 5 = Best (no effect)
- 4 = Softens (recovers)
- 3 = Softens (no recovery)
- 2 = Blistered (no recovery)
- 1 = Worst Destroyed
- s = With Stain
- * Contact time > 5hrs = 1
Safety & Health
- Health Precautions
- Inhalation of vapor or mist can cause headache, nausea irritation of nose, throat, and lungs.
- Prolonged or repeated skin contact can cause slight skin irritation.
- Be sure to extinguish all pilot lights and sources of ignition.
- Ventilate the area prior to starting the job.
- Acetone fumes are extremely flammable.
- Slip Precaution
- Westcoat Specialty Coatings Systems highly recommends the use of a slip-resistant additive to all coatings/systems that may be exposed to wet, oily, greasy or slippery conditions.
- It is the end user’s responsibility to provide a flooring system that meets current safety standards.
- Westcoat and its distributors will not be responsible for injury incurred during a slip and fall incident.
- For the current coefficient of friction requirements, please consult your local building codes.
Packaging & Availability
- Packaging Type
- Packaging
5 gal pail
Storage & Handling
- Shelf Life
5 years in unopened packaging