Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Features
- Broad hardness range: Shore 00 to D 90
- Adjustable flow properties
- Filled and unfilled systems
- Good temperature cycle behavior
- Clear, UV-resistant systems
- Low dielectric constant
- Self-extinguishing systems in accordance with UL 94 V-0
- Good adhesion not only on conventional thermoplastics, but also on high-performance plastics such as LCP, BMC, etc.
- Operating temperature range: -60 °C to +165 °C
- Pot life adjustable from 1 to 90 minutes
- Thermal conductivity up to 2.0 W/m·K
Applications & Uses
Properties
- Typical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Density of Hardener at 22 °C | 1.20 –1.24 | g/cm³ | DIN EN ISO 2811-1:2016-08 |
Thermal Conductivity | 0.2 | W/m·K | DIN EN ISO 22007-2:2015-12 |
Volume Resistivity | 10^13 | Ω·cm | DIN EN 62631-3-1:2017-01 |
Mixing Ratio | 100 : 20 | Parts by Weight | — |
Operating Temperature | –60 up to +120 | °C | — |
Water Absorption | 0.2 | % | 30 days, 22 °C |
Coefficient of Expansion (<–70 °C) | 80 | ppm/K | TMA ISO 11359-2:1999-10 |
Coefficient of Expansion (>–70 °C) | 220 | ppm/K | — |
Density of Resin at 22 °C | 0.93 – 0.95 | g/cm³ | DIN EN ISO 2811-1:2016-08 |
Dielectric Constant ε (at 50 Hz, 23 °C) | 5.1 | — | DIN EN IEC 62631-2-1:2018-12 |
Dielectric Strength | 20 | kV/mm | DIN EN 60243-1:2014-01 |
E modulus | 2 | N/mm² | DIN EN ISO 527-2:2012-06 |
Glass Transition Temperature | –65 | °C | TMA ISO 11359-2:1999-10 |
Loss Factor tan δ (at 50 Hz, 23 °C) | 0.02 | — | DIN EN IEC 62631-2-1:2018-12 |
Mixed Viscosity at 22 °C | 1800 – 2200 | mPa·s | Rotational viscometer |
Reactivity at 22 °C | 3 – 40 | min | — |
Hardness | 20 – 30 | Shore A | DIN ISO 7619-1:2012-02 |
Hardness | 20 - 30 | Shore A | DIN ISO 7619-1:2012-02 |
Value | Units | Test Method / Conditions | |
Flammability | HB | — | UL 94 |