Wilsonart® 10 PVA Assembly and Cold Press Adhesive - Wilsonart

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Polyvinyl Acetates (PVA)
Product Type: Adhesive
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Adhesives & Sealants
Contact Adhesives
Primary Contents: Polyvinyl acetate homopolymer (CAS 9003207), Polyvinyl alcohol (CAS 25213245), Water (CAS 7732185), NJTSRN # 990011

Features & Benefits

Ready-to-Use Product Features: Fast Setting,
Good Machinability,
Low VOC,
Non-Toxic
Product Highlights: Bonds to most porous materials including decorative laminate, wood, pottery, fabrics and more

For assembly and glue spreader/cold press applications

Fluorescent dye added to glow with blacklight for easier viewing and removal of excess adhesive when wet

Fast-setting

Professional use only

Dries clear

Non-toxic and easy clean-up

Does not require stirring before use

Applications & Uses

Markets: Building & Construction
Applications: Building & Construction — Decorative Materials & Finishes
Wallcoverings & Decorative Laminates
Application Area: Laminates
Compatible Substrates & Surfaces: Wood
Applications To Avoid: Tempered hardboard products

Fire retardant treated board products

Low pressure melamine surfaces

Boards treated to be moisture resistent

Metallic, polyester or painted surfaces
General Use Instructions: Pottery - Spread the adhesive evenly and clamp pieces together for 30-60 minutes. The bond will reach full strength in 24 hours.

Paper and cloth - Spread the adhesive lightly and press materials together for 15 to 30 minutes or until the moisture in the bond dissipates.

Joint Assembly - Squeeze a generous amount of adhesive over the area to be bonded, fit the joints together snugly, and clamp the assembly to stabilize the bond for 30 - 60 minutes or until the adhesive film dries.

High Pressure Decorative Laminate:

Follow the glue spreader manufacturer’s recommendations.

Use a dual durometer roller (Black Bros. A2158, 16 x 1⁄2” pattern).

Apply adhesive at 6-8 wet mils with glue spreader.

Open time: 5 minutes

Closed time: 20 minutes

Press time: 30 - 60 minutes @ 40 - 50 psi (at 70°F, 45%RH)

Allow one hour before light machining, 12 - 24 hours for heavy machining

Properties

Color: White
Physical Properties
GREENGUARD® Indoor Air Quality Standards: GREENGUARD Indoor Air Quality Certified Products meet the following minimum emission requirements:
Category: Adhesives/Sealants

Emission Types Measure

Individual VOCs <0.1 TLV

Formaldehyde
<0.05 ppm (<0.06 mg/m3)

4-phenylcyclohexane <0.0065 mg/m3

Styrene <0.07 mg/m3

Total VOCs <0.05 mg/m3

Total aldehydes <0.1 ppm

Regulatory & Compliance

Certifications & Compliance: LEED (Leadership in Energy & Environmental Design),
Ozone Transport Commission (OTC),
SCAQMD Compliant
Regulatory & Compliance: Conforms to ASTM D-4236.

GREENGUARD® Certified.

Complies with SCAQMD, Rule 1168.

Complies with the Ozone Transport Commission (OTC).

Qualifies for LEED®-NC & CI EQ Credit 3.2: Construction Indoor Air Quality Management Plan-Before Occupancy.

Qualifies for LEED®-NC & CI EQ Credit 4.1: Low Emitting Materials: Adhesives & Sealants.

Qualifies for LEED®-NC & CI EQ Credit 4.4: Laminating adhesives shall contain no added urea-formaldehyde resins.

Packaging & Availability

Packaging Type: Drums,
Pails,
Totes (IBC)
Availability: 5-gallon pails, 55-gallon drums and 330-gallon totes (returnable)

Storage & Handling

Storage: Do not allow product to freeze

Close container tightly when not in use and store off the floor in a well ventilated area.

Rotate stock
Shelf Life: Shelf life expires 1 year from manufacture date.
Clean Up/Disposal: Clean with hot tap water while adhesive is wet.

Removal of dried adhesive is very difficult. Use diluted ammonia to clean dry adhesive.

Wash water is RCRA non-hazardous.

Dispose of in accordance with regulations.