Knowde Enhanced TDS
Identification & Functionality
- Primary Contents
Light hydrotreated distillate (CAS 68410979), Acetone (CAS 67641), Toluene (CAS 108883)
Features & Benefits
- Product Highlights
- For detaching incorrectly bonded surfaces
- Cleans equipment such as brushes, roller covers, spray guns, pumps and pressure pots
- Not recommended for thinning adhesive products
- Professional use only
- Does NOT require stirring before use
Applications & Uses
- Applications To Avoid
Do not use this product or any other to thin Wilsonart Adhesives.
- General Use Instructions
- Use only after you have read and understand the warnings, safety measures and first aid instructions printed on container. Apply and allow to dry only in a well ventilated area. Application and drying must be in an approved spray booth or in an area provided with approved ventilation to exhaust the solvent vapors. Use outdoors when possible. If indoors, open all windows and doors, and shut off all sources of ignition.
- For Equipment Cleaning : Use WA 110 to remove excess adhesive and to clean equipment immediately after use. Cleaning becomes more difficult as the adhesive sets longer. Brushes and rollers may be stored suspended in WA 110 between uses. Use WA 110 to clean application equipment, including pumps, spray guns or other equipment by circulating through the spray system.
- For Adhesive Residue Removal : WA 110 may also be used to remove adhesive overspray or residue from finished products. Dab rag in solvent and lightly rub residue, increasing rubbing pressure as needed. Do not flood surfaces during cleaning as solvent will attack bonds and cause edges and seams to lift.
- For Detaching Incorrectly Bonded Surfaces : To separate incorrectly bonded surfaces, apply WA 110 to the adhesive line. Keep the adhesive line wet with solvent while pulling the surfaces gently apart as the solvent loosens the bond until the pieces can be separated. Allow the two surfaces to dry thoroughly before attempting to rebond using fresh adhesive. Do not trap solvent in the new bond.
- Thinning : Even though WA 110 is a true adhesive solvent, thinning any Wilsonart adhesive with WA 110 is NOT recommended and may lead to bond problems.
Properties
- Odor
- Strong Solvent
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Density | 6.26 | lbs/gal | - |
| Solids Content | 0.0 | % | - |
| Volatile Organic Contents | 531.0 | g/L | - |
| Voc(Less Water & Exempt Solvents) | 735.0 | g/L | - |
| Vhap Content | 182.0 | g/L | - |
| Flashpoint | 5.5 | °F | Closed Cup |
| Composite Part Pressure (Nonphotochemically Reactive, 20 ̊C) | 175.0 | mm Hg | - |
Packaging & Availability
- Availability
1-gallon cans, 5-gallon pails, 55-gallon drums.
Storage & Handling
- Storage
- Close container tightly when not in use.
- Rotate stock.
- Store in a cool, well ventilated area and away from ignition sources.
- Shelf Life
Shelf life expires 2 years from manufacture date.
- Shipping Information
- Ship Domestic Ground
- Flammable Liquids, N.O.S. (Contains toluene, acetone), Class 3,
- UN1993, PGII
- Clean Up/Disposal
- Dispose of waste solvent and solvent soaked rags in accordance with regulations.
- Empty container may contain hazardous residue or flammable vapors which may explode upon ignition.
- Do not allow in any sewers, on the ground or into any body of water.