Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Creamy body
- Soft hand
- Excellent printability
- No build-up
Applications & Uses
- Applications
- Cure Method
- Applications
- Direct printing
- Light to dark colored garments
- Cotton, cotton blends & polyester
- Application Recommendations
- Stencil: Any direct emulsion or capillary film.
- Wet on Wet Printing: Can be printed wet-on-wet to increase production.
- Modifications: To reduce viscosity use Curable Reducer (110-9906), improve stretch use G&SBase (110-1020), puff use Puff Additive (110-9903), extend color use Soft-hand Base (110-0111) & for suede puff or dulling use Suede Additive (110-9907).
- Wash-up: Any plastisol cleaner.
Properties
- Color
- Bleed Resistance
- None
- Opacity
- High
- Squeegee Blade
- Sharp
- Typical Properties
Value | Units | Test Method / Conditions | |
Mesh | 86-300 | — | — |
Technical Details & Test Data
- Technical Details
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
- Flashing: 700°F for 8 seconds, just enough so the surface is tack free.
- Fusion/Curing: 325°F/160°C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390°F/195°C for 8 seconds.
- Special Notes
PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
Storage & Handling
- Storage
Ideally 65 to 80°F. Keep out of direct sunlight.