Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Creamy body
- Extremely Soft hand
- Excellent printability
- No build-up
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Cure Method
- Applications
- Direct printing
- Light to medium colored garments
- Cotton, Cotton/polyester & 100% polyester
- Application Recommendations
- Wet on Wet Printing: Should be printed last to minimize build-up.
- Modifications: To reduce viscosity use Curable Reducer (I10-9906)
- Wash-up: Any plastisol cleaner.
Properties
- Color
- Bleed Resistance
- None
- Opacity
- High
- Squeegee Blade
- Sharp
- Typical Properties
Value | Units | Test Method / Conditions | |
Mesh ( The higher the mesh count, the softer the feel) | 110-300 | — | — |
Technical Details & Test Data
- Special Notes
PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed. When printing onto garments that have the potential to bleed, a low bleed underlay needs to be utilized.
- Technical Details
- Stencil: Any direct emulsion or capillary film.
- Squeegee Hardness & Angle: Medium to hard at a 45 degree angle. The higher the squeegee pressure is, the softer the feel
- Flashing: Not recommended.
- Fusion/Curing: 325 F/160 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds.
Storage & Handling
- Storage
Ideally 65 to 80°F. Keep out of direct sunlight.