Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Product Type
- Technologies
- Product Families
Applications & Uses
- Markets
- Application Area
- Typical Coating Weight
- 2,000 - 3,500
- Applications & Uses
- Cleaning parts by abrasive blasting, alkaline soak cleaner, or acidic scale conditioner prior to phosphating.
- These coatings are suitable for impregnation with oils, or other lubricants, for friction resistance, and to assist in "break-in" of bearing surfaces. SOLUCOAT 5037J is particularly suited to production of such coatings on high carbon and hard alloy steels.
- Operating Data
- Equipment: Stainless steel tanks and heating coils are recommended.
- Usage: Clean parts by abrasive blasting, alkaline soak cleaner, or acidic scale conditioner prior to phosphating. Cleaning must be such that no water break is observed when parts are held under cold running water. Rinse thoroughly. Immerse the clean parts in the SOLUCOAT 5037J bath for a sufficient length of time to produce the desired coating. Ordinarily, this will be for 10-30 minutes. Rinse parts immediately in cold water for not less than 60 seconds. Follow immediately with a final chromated or non-chromated rinse or an oil dip.
Properties
- Physical Form
- Appearance
- Liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
pH | 2.0 - 3.0 | - | - |
Concentration (By Volume) | 7 - 10 | % | - |
Temperature | 200 - 210 | °F | - |
Regulatory & Compliance
- Compliance
This product conforms to MIL spec DOD-P-16232, Type M.
Safety & Health
- Safety Factors
- SOLUCOAT 5037J is an acidic product. Avoid contact with skin or eyes.
- If contact should occur, flush well with water. Contact physician for eyes.