Products

Xenia

81 Products found on Xenia in Footwear

TDSWith TDS

XECARB® 11-C20-HP

Polymer Name:Polypropylene Homopolymer (HPP)
Chemical Family:Polypropylenes (PP), Polyolefins
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 11-C20-HP is a 20% carbon fiber reinforced PP

XEBRID™ 21-C10-G10

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers, Carbon Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 21-C10-G10 is a 10% carbon fiber + 10% glass fiber reinforced PA12

XECARB® HM 11-C20-HP

Polymer Name:Polypropylene Homopolymer (HPP)
Chemical Family:Polypropylenes (PP), Polyolefins
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® HM 11-C20-HP is a 20% carbon fiber reinforced PP

XECARB® SL 17-C15-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:5500.0 - 5500.0 MPa

XECARB® SL 17-C15-P3 is a 15% carbon fiber reinforced PEBA

XECARB® 1-C50

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C50 is a 50% carbon fiber reinforced PA66

XECARB® HM 29-C40

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® HM 29-C40 is a 40% carbon fiber reinforced PA4.10

XECARB® 22-C30

Polymer Name:Polyamide 612 (PA 612)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 22-C30 is a 30% carbon fiber reinforced PA6.12

XECARB® 1-C40

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C40 is a 40% carbon fiber reinforced PA66

XECARB® 40-C30-M31

Polymer Name:Polycarbonate (PC)
Chemical Family:Polycarbonate (PC)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 40-C30-M31 is a 30% carbon fiber reinforced PC

XECARB® 12-C20-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C20-HT is a 20% carbon fiber reinforced PPA

XECARB® SL 17-C15-P6

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:1500.0 - 1500.0 MPa

XECARB® SL 17-C15-P6 is a 15% carbon fiber reinforced PEBA

XECARB® 1-C30-P20

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber, PTFE
Processing Methods:Injection Molding

XECARB® 1-C30-P20 is a 30% carbon fiber + 20% PTFE reinforced PA66

XEBRID™ 1-C30-G30

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers, Glass Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 1-C30-G30 is a 30% carbon fiber + 30% glass fiber reinforced PA66

XECARB® HM 2-C25-ST

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® HM 2-C25-ST is a 25% carbon fiber reinforced PA6

XECARB® 21-C30-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C30-AE is a 30% carbon fiber reinforced PA12

XECARB® ST 2-C40

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® ST 2-C40 is a 40% carbon fiber reinforced PA6

XECARB® SL 17-C15-P2

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Robotics, Structural Parts, Drones, Sporting Goods, Aerospace Applications, Mountaineering Boots
Features:Dimensional Stability, Good Aging Behavior, Low Temperature Toughness, Good Mechanical Properties, UV Resistant, Light Weight, Renewable Resource Content, Good Environmental Stress Crack Resistance (ESCR), Good Weather Stability
Flexural Modulus:3000.0 - 3000.0 MPa

XECARB® SL 17-C15-P2 is a 15% carbon fiber reinforced PEBA

XECARB® ST 2-C35

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® ST 2-C35 is a 35% carbon fiber reinforced PA6

XEBRID™ 21-C20-G40

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers, Carbon Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 21-C20-G40 is a 20% carbon fiber + 40% glass fiber reinforced PA12

XECARB® 17-C30-P6

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:1500.0 - 1500.0 MPa

XECARB® 17-C30-P6 is a 30% carbon fiber reinforced PEBA

XECARB® 29-C30

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 29-C30 is a 30% carbon fiber reinforced PA4.10

XECARB® 21-C20-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C20-AE is a 20% carbon fiber reinforced PA12

XECARB® 12-C50-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C50-HT is a 50% carbon fiber reinforced PPA

XECARB® 21-C50-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C50-AE is a 50% carbon fiber reinforced PA12

XECARB® 29-C10

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 29-C10 is a 10% carbon fiber reinforced PA4.10

XECARB® 4-C30-XY

Polymer Name:Polyphenylene Sulfide (PPS)
Chemical Family:Polyphenylene Sulfide (PPS)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 4-C30-XY is a 30% carbon fiber reinforced PPS

XECARB® 37-C30

Polymer Name:Polyamide 46 (PA 46)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 37-C30 is a 30% carbon fiber reinforced PA46

XECARB® 45-C20-S

Polymer Name:Polyvinylidene Fluoride (PVDF)
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 45-C20-S is a 20% carbon fiber reinforced PVDF

XECARB® 17-C30-P10-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa