Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Features
Highly Impermeable - ZEBRON® coatings test at least 3 times lower in vapor transmissions than other polyurethane coatings and significantly lower than epoxies. Tests show no water penetrates ZEBRON® to reach the concrete surface. Corrosion from oxygen diffusion is reduced by a factor of 10. The low permeability of ZEBRON® makes it ideal for protecting sewage systems from hydrogen sulfide gas and for protecting metal surfaces from corrosive atmospheres
Elongation And Flexibility - ZEBRON® coatings will bridge cracks more than a millimeter across in concrete. A 50 mil coating on a steel plate will bend over an 8 millimeter mandrel without cracking.
Rapid Application - ZEBRON® is sprayed on the surface in one application. It can be immersed immediately and walked on in 6 hours. Full cure is 7 days. No heating, baking or after treatment is required. ZEBRON® coatings provide exceptional protection from severe corrosion and abrasion.
Extreme High Build - ZEBRON® coatings can be applied from 20 mils to several inches even on vertical and overhead surfaces in a single application using multiple passes without sagging or distortion.
Excellent Weather Resistance - ZEBRON® has been protecting surfaces in both desert and marineclimates for many years with no chalking, embrittlement or other deterioration.
Outstanding Abrasion Resistance - ZEBRON® is highly recommended for slurry lines, for coal and aggregate chute and exterior hulls of ships.
Applications & Uses
- Applications
- Coating Type
- Uses
ZEBRON® coatings are used successfully on pipelines, storage tanks, sewage systems, pilings and ships, including ice breakers. They are also widely used in manholes, chemical and electronic plants, paper mills and petroleum refineries. ZEBRON® has perfected the use and application technique of its coatings on a wide variety of substrates. Our system pairs the highes quality materials with more than 40 years of application expertise.
For spraying. High build product for 30 mils or thicker
- Application
Purge Material for Spray - DOP (Di-Octal-Pthalate), Flash Point 216°C (420°F) COC / Acetone Flash Point - 20°C (-4°E) CC Autoignition temperature: 465°C (869°F)
Cleaning Solvent
- Toluene, Flash Point 5°C (40°F) TCC
- Xylene, flash Point 27°C (81°F) TCC
- Methylene Di Chloride, Flash Point 25°C (77°F)
- Methyl Ethyl Ketone, Flash Point -6°C (21°F)
Primer - For Concrete & Wood surfaces. Zebron Low Temperatures Epoxy. (ZLTE) Flash Point 110°C (230°F)
Properties
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Abrasion Resistance | 1.250,000 | units | ASTM D-658 |
| Bond Strength (On Steel) | 2500.0 | psi | ASTM D-638 |
| Compressibility | 4200.0 | psi | ASTM D-695 |
| Elongation (Recoverable, 25°C) | 67.0 | % | ASTM D-638 |
| Flash Point (COC) | 268.0 | °C | — |
| Flexibility | No Effect | — | ASTM D-792 |
| Impact | 1637.0 | In./Lb. | ASTM G-14 |
| Leach Rate | 0.03 | mg/sq.in | — |
| Surface Hardness | 60 - 70 | Shore D | — |
| Tensile Strength (25°C) | 2500.0 | psi | ASTM D-638 |
| Value | Units | Test Method / Conditions | |
| Weight | 518.0 | Lb./Drum | — |
| Density | 10.8 | Lb./Gal | — |
| Mixing Ratios | 3 parts 300 Series to 1 part 9000 Activator | — | — |
| Hydraulic Pressure at Tip (Graco Hydra-Cat System) | 1500 - 2500 | psi | — |
| Specific Gravity | 1.3 | — | — |
| Spray Tip | 0.019 - 0.037 | Inches | — |
| Total Drum Weight | 553.0 | per Lb. | — |
| Viscosity (77°C) | 1500 - 3000 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Packaging Type
Storage & Handling
- Shelf Life
Over one year. Drums must be rotated every 90 days.