Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
Designed for ferrous substrates, AxxaWash™ KF-123 is a mildly alkaline aqueous-based cleaner for the removal of light to medium-duty hydrocarbon soils while offering chloride mitigation. AxxaWash™ KF123 is ideally suited to clean and prepare the surface for a long-term rust preventative such as Zerust® Axxanol™ or Axxatec™ product lines. AxxaWash™ KF-123 can be rinsed or used as a dry-in-place cleaner and flash-rust inhibitor. Alternatively, AxxaWash™ KF-123 prepares the surface for long-term water or solvent-based rust inhibitor/preventative. AxxaWash™ KF-123 is conveniently offered as a liquid concentrate and may be diluted per the application. Speak with your Zerust®/Excor® sales representative to obtain your application-specific operator guide.
- Benefits
- Contains no phosphates, silicates, alkylphenol ethoxylates, or boron salts.
- Enhances the effectiveness of rust preventative coatings.
- Low foam above 135°F.
- Reduces flash-rust.
- Deactivates common anionic contaminants.
- Not regulated for transport or disposal.
- Mild alkaline cleaner.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Application Methods
- Ultrasonic
- Immersion
- Spray (low to mid-spray pressures)
- May be used with Zerust® Axxatec™ rust inhibitor or Axxanol™ preventative
- Apply via ultrasonic, immersion, spray (low to mid-spray pressures)
- For ferrous substrates. Test prior to use on non-ferrous substrates
- Application Example
Zerust® AxxaWash™ KF-123 is used in an immersion system as a final wash, removing light to medium-duty hydrocarbon soils while also offering flash-rust inhibition.
- Suggested Dosage Instructions
Applications Dosage Percent by Volume
Typical cleaning application 3 - 5 % Lighter soil load application 1 - 2 % Heavier soil load application 6 - 10 %
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Temperature | 135 - 150 | °F | — |
| Dilution Ratio | As required | — | — |
| Dwell Time | 1 - 10 | minutes | — |
| Removability (RO/DI) | Purified water | — | — |
| pH of Concentrate | 11.1 | — | — |
| pH of 5% Solution | 10.75 | — | — |
| Freeze Point | 7.0 | °F | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
- Avoid strong oxidizers, strong acids, aluminum, and red/ yellow metals
- Provide adequate ventilation to minimize vapor concentrations
- Avoid contact with skin and eyes
- Do not breathe mist, spray, vapors
- Wear personal protective equipment
Packaging & Availability
- Availability
Zerust®/Excor® AxxaWash™ KF-123 is sold as a liquid concentration.
Part Number Quantity 350-W-00003PL 5 Gal (19 L 350-W-00003DR 55 Gal (208 L)
Storage & Handling
- Storage
Store in a cool, dry place and away from sunlight in original packaging. Storage temperature should be kept between 10 to 130°F for up to 2 years from the date of shipment. Do not allow the product to freeze. Reseal or close the container cap after each use. If the product is exposed below 10°F or above 130°F , increase/reduce temperature and mix before use.