Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
Zerust®/Excor® AxxaWash™ NW-10C is a mildly alkaline, aqueous-based cleaning agent that can be used in immersion, ultrasonic, and low to ultra-high pressure (UHP) spray cleaning modes. In addition to effective hydrocarbon soil removal, a solution of AxxaWash™ NW-10C deactivates common corrosion causing anionic contaminants such as chlorides and sulfates left by metalworking fluids. Cleaning metals effectively results in prolonged periods of flash corrosion inhibition. The product is conveniently offered as a liquid concentrate and may be diluted per the application. Ideal for use on highly reactive ferrous metals such as cast iron and freshly worked steel. Metals properly cleaned with a solution of AxxaWash™ NW-10 have enhanced corrosion protection from products such as Zerust Axxatec™ and Axxanol™ coatings and Zerust® VCI packaging materials. Thoroughly dry the cleaned metals before placing them into packaging. Check with your Zerust®/Excor® representative for a corrosion inhibitor system best for your metal assets.
- Benefits
- Water-based preservation cleaner concentrate
- For use in ultrasonic, immersion, and low to ultrahigh pressure spray modes
- Streak-free and low odor
- Deactivates common anionic contaminants
- Removes soluble and particulate metalworking soils
- Enhances the effectiveness of
- RP coatings and VCI packaging
- Reduces flash corrosion
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Compatible Substrates & Surfaces
- Application Example
- Prevent rust on parts caused by contaminants left over from metalworking fluids by washing with a solution of AxxaWash™ NW-10C. Apply as a final rinse for metals that are streak-free.
- Apply via immersion, ultrasonic, spray, pressurized spray
- Mainly for use on ferrous-based alloys and stainless steel. Test prior to use on non-ferrous alloys.
- Suggested Dosage Instructions
Applications Dosage Percent by Volume
Immersion 1 - 5 % Ultrasonic 1 - 5 % Spray - all pressures 1.5 - 2 %
Properties
- Physical Form
- Appearance
- Amber liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Application Temperature | 77 - 140 | °F | — |
Dilution Ratio | As required | — | — |
Dwell Time | As required | — | — |
pH of Concentrate | 11.77 | — | — |
pH of 5% Solution | 77.15 | — | — |
Max VOC of Concentrate | 26.0 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautions
- Product foams when used in spray mode. Contact your Zerust®/Excor® representative for recommendations for suitable defoaming agents.
- If the product becomes frozen in storage or shipping, allow it to thaw and mix well. The Reconstituted product should appear clear and amber yellow. If it is cloudy or has solids, contact your Zerust®/ Excor® representative.
Packaging & Availability
- Complementary Products
- Zerust® VCI Packaging
- Axxatec™ Water-Based RPs
- Axxanol™ Oil-Based RPs
- AxxaVis™ Additives
- AxxaClean™ Rust Removers
- Availability
Zerust®/Excor® AxxaWash™ NW-10C is sold as a liquid concentrate. Large quantity pricing available upon request.
Part Number Quantity 350-W-00001PL 5 Gal (19 L 350-W-00001DR 55 Gal (208 L)
Storage & Handling
- Storage
Store in (34 to 122°F), dry place and away from sunlight in original packaging for up to 2 years from the date of shipment. Keep from freezing. If frozen, move to a location above 50°F and allow to thaw. Mix well before use.
- Disposal
Dispose of in accordance with local, national, and international regulations.