Cor-Ban® 22

Identification & Functionality

Product Type

Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Protective Coatings

Features & Benefits

Labeling Claims

Heavy Metal-free,

Low Toxicity

Ready-to-Use Product Features

Corrosion Resistant,

Crack Resistant,

Detectable,

Good Barrier Properties,

High Capacity of Penetration,

Low Toxicity,

Self Healing,

Service Life Extension,

Soft

Key Benefits

• Preferred CIC for routine maintenance.
• > 4000 hours of salt spray.

Applications & Uses

Application Method

Spray

Compatible Substrates & Surfaces

Metal,

Steel

Applications

• Apply by conventional airless, air-operated spray equipment, or by aerosol.
• Cor-Ban® 22 can be applied over pre-existing corrosion.
• The coating can be applied as thin as 1 mil (25 microns) film thickness to achieve the desired corrosion protection.
• The Cor-Ban® 22 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.
• All properties represented were achieved with a wet film thickness of 1.0 mils (25 microns). This wet film thickness can be measured with Zip-Chem® ’s Wet Film Thickness Gage.
• One aerosol can covers approximately 90 ft² (8.3 m²)
• Paste application of Cor-Ban® 22 is available as Cor-Ban® 27L.

Properties

Physical Properties

	Value	Units	Test Method / Conditions
Compatibility Cd, Mg, AI	Pass	—	—
Corrosion Resistance (On steel)	min. 4000	hours	ASTM B-117
Flash Point	105.0	°F	—
Fungal Growth (Per Fed-STD-810)	No Microbial Growth	—	Method 508.7
Low Temp Flaking	Pass	—	—
Material VOC	538.0	g/L	—
Non-Volatile Content	33.0	%	—
Penetration (BMS 3-23F)	pass	—	(BMS 3-23F
Solvent Type	Aliphatic	—	—
Specific Gravity	0.82	—	—
Water Displacement	No Rust	—	—
Water Resistance	Pass	—	—

Regulatory & Compliance

Specifications

• Boeing BMS 3-23 (Meets requirements)
• NSN 8030-01-523-4290 (16 fl oz (473 ml) Aerosol)
• NSN 8030-01-531-7352 (5 Gallon (18.9L) Pail)
• T.O. 1C-130A-23 (Called out)
• T.O. 1C-5A-23 (Called out)

Packaging & Availability

Packaging Type

Cans,

Drums,

Pails

Available Pack sizes

• Case of 12 of 16 fl oz (473 ml) aerosols-007047
• Case of 24 of 4 fl oz (118 ml) aerosols-103734
• Case of 4 each gallon (4 each of 3.8L) cans-009400
• 5 Gallon (18.9L) pail-007049
• 55 Gallon (208L) drum-007050
• Special packaging upon request