Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- A long lasting, water displacing, and high penetration corrosion inhibiting compound.
- Offers fast dry time and thin film of BMS 3-23.
- Offers long lasting corrosion inhibition properties of BMS 3-29 and BMS 3-35.
- Use in place of airbus CML 15-006.
- Key Benefits
- Fast dry time
- Free of chromates
- Free from heavy metals
- Low toxicity
- Non-sagging, detectable, and water displacing film
- Very low dry film weight
- Solvent removable
- Non-cracking and non-flaking to -65°F (-54°C)
- Non-tacky
- > 3000 hours salt spray
- < 0.3 Mil (8 microns) required to surpass specification.
Applications & Uses
- Markets
- Applications
- Application Method
- Applications
- Use on upper edge floor beams, wheel wells, pressure deck, and center wing sections.
- Apply by conventional airless, air-operated spray equipment, or aerosol.
- The Cor-Ban® 23 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.
- All properties represented were achieved with a dry film thickness of range 0.3 - 0.5 mils (7-12 microns).
- The wet film will self level to achieve the desired dry film thickness when applied to an inclined surface.
- One aerosol can covers approximately 160 ft² (14.9 m²) and one gallon (3.8L) of bulk material covers approximately 2290 ft² (56.2 m²/liter).
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Drying Time | max. 1 | hours | — |
| Exfoliation (-65°F) | Pass | — | — |
| Flash Point | 114.0 | °F | — |
| Fungal Growth (Per Fed-STD-810) | No Microbial Growth | — | Method 508.7 |
| Low Temp Flaking | Pass | — | — |
| Non-Volatile Content | 42.0 | % | — |
| Operating Temperature | -65 - 350 | °F | — |
| Penetration (Per hours per BMS 3-35) | min. 4 | inch | BMS 3-35 |
| Salt Spray Protection (On aluminum) | min. 3000 | hours | — |
| Specific Gravity | 0.88 | — | — |
| Viscosity | 35-40 | cps | — |
| Water Displacement | No Rust | — | — |
Regulatory & Compliance
- Specifications
- AIMS 09-08-001 Type I Grade 3
- BAMS 565-006 Type V (QPL)
- BMS 3-23K Type II Class 2 Grade A & B (QPL)
- BMS 3-35
- DHMS C4.12 Type II Grade 3 & 4 (QPL)
- Fed-Ex E.O. 9-5100-7-5001
- MEP 10-063 (QPL)
- NSN: 8030-01-531-7361 (16 fl oz (473 ml) Aerosol)
- NSN: 8030-01-531-7362 (5 Gallon (18.9L) Pail)
Packaging & Availability
- Available Pack sizes
- Case of 12 of 16 fl oz (473 ml) aerosols-008017
- Case of 12 each quarts (946 ml)-010097
- Case of 4 each Gallon (4 each of 3.8 L) cans-009401
- 5 Gallon (18.9L) pail-008015
- 55 Gallon (208L) drum-008016
- Special packaging upon request