Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Non-tacky with a light, transparent, reddish-pink tint.
- Key Benefits
- Non-cracking and flaking to -40°F (-40°C)
- Low VOC
- Free of chromates
- Free from heavy metals
- Low toxicity
- Detectable and non-sagging
- thixotropic film
- Fast drying
- Solvent removable
- Water displacing
- High penetration
- Very low dry film weight (< 1 mil (25 microns) required to surpass specification)
- > 2000 hours salt spray
- High solids: >51%
Applications & Uses
- Markets
- Applications
- Application Method
- Applications
- Apply by using conventional airless or air-operated spray equipment or by using aerosol.
- Apply at 1 - 1½ mils (25-38 microns) wet thickness. This wet thickness can be measured with Zip- Chem® ’s Wet Film Thickness Gage.
- All properties represented were achieved with a dry film thickness of 0.5-0.75 mils (12 -19 microns).
- Use on high profile aircraft substrates; upper edge floor beams, wheel wells, pressure deck, and center wing sections
- One aerosol can covers approximately 95 ft² (8.8 m²)
- 1 gallon (3.8L) of bulk material can covers approximately 1600 ft² (39.3 m² per liter)
- The Cor-Ban® 35 aerosol can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.
- Cured Cor-Ban® 35 can be removed with Sur-Prep® 3167, Sur-Prep® 3160, or Zip-Strip™ 125M.
Properties
- Physical Properties
Value | Units | Test Method / Conditions | |
Compatibility Cd, Mg, AI | Pass | — | — |
Drying Time | max. 1 | hours | — |
Exfoliation (-65°F) | Pass | — | — |
Flash Point | 115.0 | °F | — |
Low Temp Flaking | Pass | — | — |
Material VOC | 395.0 | g/L | — |
Non-Volatile Content | min. 51 | % | — |
Operating Temperature | -65 - 350 | °F | — |
Penetration (BMS 3-23G) | Pass | — | BMS 3-23G |
Solvent Type | Aliphatic | — | — |
Specific Gravity | 0.9 | — | — |
Water Displacement | No Rust | — | — |
Regulatory & Compliance
- Specifications
- AIMS 09-08-002 Type II Gr 2 (Meets requirements)
- AIMS 09-08-003 (On Airbus CML)
- ATR 42/ATR 72 SRM
- BAE: AVP 2-022
- BMS 3-23F Type II (Meets requirements)
- BMS 3-29 (Meets requirements)
- BMS 3-35B (On Boeing QPL)
- Boeing DMS 2150
- Bombardier BAMS 565-006 Type I & Type II
- Cessna CSNP038 Type IVA / Class 2
- Dassault DGQT 1.7.0.0103
- de Havilland DHMS C 4.12
- Embraer 51-61-00 Type I & Type II
- FedEx A30-51-001
- Gulfstream GAC115AD
- MEP 10-063
- Mil-DTL-85054D
- NSN: 6850-01-492-2932, 8030-01-531-7358 (16 fl oz (473 ml) Aerosols) (Meets Requirements)
- NSN: 8030-01-615-4740 (Gallons (3.8L)) (Meets Requirements)
- NSN: 8030-01-659-2958 (1 Gallon (3.8L)) (Meets Requirements)
- NSN: 8030-01-531-7360 (5 Gallons (18.9 L)) (Meets Requirements)
- NSN: 8030-01-615-4733 (8oz (227 g) Brush In Cap) (Meets Requirements)
- NSN: 8030-01-615-4737 (Quart (946 ml)) (Meets Requirements)
- SIKORSKY SS 8536 Type II
- Sukhoi RRJ0000·RE-811-2559
- Viking VMS C4.12
Packaging & Availability
- Available Pack sizes
- Case of 12 of 16 fl oz (473 ml) aerosols-004675
- Case of 12 of 8 oz (227 g) brush In cap-010884
- Case of 12 each quart (946 ml)-009408
- Case of 4 each gallon (4 each of 3.8L) cans-009409
- 5 Gallon (18.9 L) pails-002104
- 55 Gallon (208 L) drums-002105
- Special packaging upon request