company tower banner
Zip-Chem Company Logo

Cor-Ban® D-5010NS

1 of 16 products in this brand
Cor-Ban® D-5010NS is a powerful penetrating oil and corrosion inhibitor used for small parts.

Product Type: Lubricant

Features: Corrosion Resistant, Electrical Corrosion Resistant, Electrically Insulating, Low Toxicity, Wide Temperature Operating Range

Application Area: Electrical Components, Wire Cables

Application Method: Spray

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Features
  • Deposits an oily film on surfaces to be protected and remains in an oily state
  • A general purpose product
Key Benefits
  • Prevents rust and corrosion on all metals
  • Harmless to plastics, rubber, and painted or plated surfaces
  • Non-conductive
  • Prevents electrolysis
  • Protects engines and parts that go into long term storage
  • Does not congeal or become gummy
  • Very effective in penetrating corrosion to loosen and lubricate frozen parts
  • Displaces moisture
  • Removes light rust formations
  • Neutralizes acid left by fingerprints
  • Neutralizes and retards effects of mild acids, alkalis, and corrosive atmospheres
  • Lubricates beneath corroded surfaces
  • Protects and lubricates delicate shop tools, gages, and instruments
  • Penetrates rust
  • Displaces small amounts of moisture left by condensation
  • Free of chromates
  • Free from heavy metals
  • Low toxicity

Applications & Uses

Application Method
Applications
  • Widely used on aircraft and engine parts during component overhaul
  • D-5010NS can be used in conjunction with the Formit® extensions to provide targeted spray to areas that may be difficult to reach but need to be coated.
  • Bulk application available as ZC-010
  • One aerosol can covers approximately 300 ft² (27.8 m²)

Properties

Physical Properties
ValueUnitsTest Method / Conditions
Boiling Range280-318°F
Dielectric Strength22.2KVASTM D-877
Flash Point155.0°F
Pour Pointmax. -90°F(ASTM D-97)
Specific Gravity0.78-0.83
Viscosity (72°F)approx. 3cst

Regulatory & Compliance

Specifications
  • MIL-C-23411 (Meets requirements)
  • A-A-50493 (Meets requirements)
  • Solar Turbines Specification ES9-249 (turbomachinery preservation)

Packaging & Availability

Packaging Type
Available Pack sizes
  • Case of 12 of 16 fl oz (473 ml) aerosols-002045
  • Case of 12 each quart (946 ml)-010121
  • Case of 4 each gallon (4 each of 3.8L) cans-009412
  • 5 Gallon (18.9L) pails-002085
  • 55 Gallon (208L) drums-002086
  • Special packaging upon request.