Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Zortrax Company Logo

Zortrax Z-SUPPORT ATP

Z-SUPPORT ATP is a soluble support filament designed with high thermal stability in mind. It does not dissolve in pure water, but in a mild alkaline solution created with Z-SUPPORT ATP Activator. Thanks to that, the material is much less sensitive to ambient moisture.

Polymer Name: Thermoplastic (unspecified)

Processing Methods: 3D Printing

End Uses: Modeling Material

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Polymer Name

Thermoplastic (unspecified)

Technologies

Plastics

Product Families

Plastics — 3D Printing Polymers

Thermoplastic Filament

Features & Benefits

Materials Features

Good Thermal Stability,

Low Moisture Absorption

Applications & Uses

Markets

Industrial

Applications

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts,

Tooling & Moldmaking

Plastics & Elastomers End Uses

Modeling Material

Plastics & Elastomers Processing Methods

3D Printing

Printing Tips

When using Z-SUPPORT ATP:

  • Make sure that your printer is fully functional and contains all the necessary components. In particular, check if:
  1. The material guides are properly attached to the extruder,
  2. The hotend and nozzle are not clogged or contaminated with material remains,
  3. The platform is not damaged/uneven,
  4. The extruder fans work properly,
  5. The printer has the latest firmware version installed and the model has been prepared using the latest Z-SUITE version.
  •  Make sure that both model and support materials have been stored in adequate conditions and have not absorbed moisture from the air.
  • Perform all diagnostic tests available in the menu - Fans Test and Axes Check procedure.
  • Carry out platform calibration.
  • Carry out nozzle alignment calibration.
  • Make sure to install the side covers set as well as the HEPA cover device.
  • In the case of problems with warping, select the Full platform preheating option: Settings -> Working Options. Also, apply an appropriate adhesive agent onto the platform. 
Applications
  • High Temperature 3D Printing
  • Partially Trapped Volumes
  • Complex Models
  • Movable Mechanisms
  • A power tool handle:This power-tool handle has been 3D printed with soluble support structures made with Z-SUPPORT ATP to enable effortless support removal from inaccessible places like screw holes.
  • Low moisture absorption :Z-SUPPORT ATP does not dissolve in pure water, so it absorbs a lot less moisture than PVA or BVOH-based materials.
  • Complex geometries :Z-SUPPORT ATP enables printing geometrically complex models as it can be easily removed from almost inaccessible places.
  • Complete dissolution :Submerged in a mild alkaline created with Z-SUPPORT ATP Activator, the material dissolves completely leaving no remnants on the model.

Properties

Color

Natural

Physical Form

Filament

Storage & Handling

Storage
  • Requirements for storage room and vessels:
  1. Store only in the original container.
  2. Keep the container tightly closed in a cool and well-ventilated place.
  • Conditions to avoid:
  1. UV radiation/sunlight
  2. Frost
  • Further information:
  1. Do not store together with food, beverages, and feedstuff.