Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Liquid Carrier
- Water
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Attributes
“workhorse” BN Coating Anti-stick:
- Molten Al, Mg, & Zn
- Hot- Pressing
- Weld Spatter
- Braze Stop-O_x001f_
High-temperature Lubrication:
- Extrusion
- Superplastic Forming
- Stops galling
- Dry-Film Lubricant (DFL)
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Ideal Use
- Reducing Friction
- Providing Release
- Barrier Layer
- Use Notes
1. Clean surfaces to be painted of any oils, dirt, scale.
2. Shake the bottle so paint is uniformly suspended.
3. Set up a cardboard piece and test spray onto it by squeezing the trigger several times to start the spray/_x001e_ow. This will also show the spray pattern.
4. Move the spray tip from left-to-right while squeezing the trigger to coat the part with the _x001d_rst coat. Coating can be varied by the frequency andstrength of squeezing the trigger. After one ‘pass’, move the spray tip about halfway down and continue spraying. Repeat this until the entire area to be painted is covered uniformly. The wet coating can be smoothed with small brush, if necessary.
5. Dry the coated part until “dry-to-the-touch” andrepeat Step 4 if a second coat is desired. Drythoroughly before placing the coated part into its high-temperature environment (generally a furnace being heated up to the use-temperature).
Properties
- Color
- Appearance
- Blue
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Active Ingredient | BN | - | - |
| Max Use Temperature for Air | 1832 (1000) | - | - |
| Max Use Temperature for Air | 1832 (1000) | °F(°C) | - |
| Max Use Temperature for Vac | 2552 (1400) | - | - |
| Max Use Temperature for Vac | 2552 (1400) | °F(°C) | - |
| Max Use Temperature for Inert | 3272 (1800) | - | - |
| Max Use Temperature for Inert | 3272 (1800) | °F(°C) | - |
| Use Atmosphere | All | - | - |
| Fired Composition | min. 85 | - | - |
| Liquid Carrier | Water | - | - |
| Binder Phase | AI2O3 | - | - |
| Active Ingredient Level | Fully Loaded | - | - |
| Brookfield Viscosity at 3/60 | 900 -1150 | - | - |
| Specifc Gravity | 1.2 | - | - |
| Coverage | 100 to 400 | - | - |
| Coating pH | 2 -3 | - | - |
| H F R Ratings | 1-0-0 | - | - |
| Substrate Use | All | - | - |
Safety & Health
- Safety Information
- Avoid breathing of spray/vapors.
- For industrial use only
Packaging & Availability
- Packaging Type
- Standard Size
12 oz. spray bottle; Sold in a package of two spray bottles. Single bottle also available. Can also be purchased as bulk paint for re-_x001d_lling: use “BN Lubricoat Blue.”
Storage & Handling
- Shelf Life
- min. 12 months, Minimum 12 Months