Products in Building & Construction: Natural Rubbers (NR)

Flytac 120 - 100W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

FloraRez® DR115 polymerized rosin is produced by the partial dimerization of gum rosin. This catalytic polymerization process results in an elevated softening point while maintaining the acid functionality of rosin. This resin is pale, thermoplastic, crystallization-resistant, and less prone to oxidation than unmodified rosin. The high acid functionality promotes specific adhesion to a variety of substrates.

FloraRez® DR95 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with an elevated softening point while still maintaining the acid functionality of rosin. FloraRez® DR95 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to various substrates.

Teckrez® HM-1000 is a Styrenated Hydrogenated hydrocarbon resin used where water-white color, excellent heat stability, narrow molecular weight distribution and a degree of polarity are beneficial. HM-1000 enables formulation of premium EVA and mPE-based hot melt adhesives providing better specific adhesion when compared to standard hydrogenated hydrocarbon resins. Other applications include hot melt PSA's, premium aerosol adhesives, elastomeric sealants, wax compounding, medical adhesives, and others.

FloraRez® DR140 is a polymerized rosin that is produced through the partial dimerization of gum rosin using a catalytic process. This results in a resin with a high dimeric acid content and a very high softening point, while still maintaining the acid functionality of rosin. FloraRez® DR140 is pale, thermoplastic, crystallization-resistant, and less prone to oxidation compared to unmodified rosin. Its high acid functionality promotes specific adhesion to a wide range of substrates.

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

AQUATAC 6025 resin dispersion is a low softening point rosin ester waterborne tackifier for pressure sensitive adhesives. AQUATAC 6025 can be used with higher softening point waterborne tackifiers to improve low temperature adhesion.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L120 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

Polytrade CarboBinder is a powerful powdered thermoplastic natural resin with high tackiness for solvent-based automotive sealants and adhesives.Our product has excellent compatibility with nitryl rubber and antioxidant agents. CarboBinder is soluble in several solvents, such as acetone, ethyl alcohol, and ethyl acetate. Once solubilized and mixed into formulations, this thermoplastic resin has a high resistance to ethyl alcohol and gasoline, making it a raw material ideal for applications in the automotive industry.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L130 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

AQUATAC XR-4343 resin dispersion is a waterborne tackifier combining high solid content with high adhesion performance and stability at high speed. This product is especially designed to be formulated into pressure sensitive adhesives (PSA) where high shear strength is required together with high adhesion.

Puyang Ruicheng Chemical C9 petroleum-resin RC-L140 is mainly made by product carbon 9 fractions which is from ethylene unit as raw material, it is a thermoplastic resin produced through some processes such as pretreatment, polymerization, distillation etc. C9 petroleum-resin isn’t a high polymer but a low polymer which the molecular weight is among 300-3000. Generally speaking, This kind of resin doesn’t use singly, but can be used with other resins as accelerant, regulator, and modifier.

Shiraishi Kogyo Kaisha Hakuenka CC is our original Ultra-fine precipitated calcium carbonate coated with organic compounds. It was originally developed for reinforcing rubber materials in the early 20th century. Hakuenka CC has 50 nm uniformed ultra-fine particles as primary particle. These particles are surface treated with fatty acid in order to improve dispersion property at mixing stage with organic materials. Hakuenka CC is specially applied for construction application where Silicone & Polysulfide sealants are used. Hakuenka CC is commonly used as other application such as rubber, plastics and so forth.

Kolon Industries HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM). .

Winlex 4100 is a pentaerythritol ester of rosin which has been stabilized to provide excellent heat and aging stability. Useful in a wide variety of adhesives due to its stability, low volatility and polymer compatibility.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

CarboGasket Flake is a thermoplastic natural resin soluble in ethanol and has a high adhesive capacity for gasket sealant formulations. Our product is soluble in ethanol and due to its flaked form, has an easy solubility. CarboGasket Flake is also compatible with nitryl rubber, providing excellent balance and performance as a vehicle of metal to metal adhesion.

Kolon Industries HIKOREZ® A-1100S is pale yellow thermoplastic resin obtained from polymerizing unsaturated aliphatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. And this grade also can be use as the binder for hot melt road marking. .

V-TAC™ 7901 dispersion is an aqueous, 53% solids, solvent-free anionic hybrid dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, polychloroprene and natural rubber. V-TAC™ 7901 enhances adhesion and is especially recommended for acrylic latex systems. V-TAC™ 7901 offers an excellent balance of adhesion for polyolefin substrates and recycled corrugated.