Products in Sealants & Caulks

Flyprene SIS 1209 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 29% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

Dragonsorb® B75 is a mixture of an antioxidant, a benzotriazole-type ultraviolet absorber, and a hindered amine light stabilizer. This product is suitable for rim polyurethane and TPU, as well as sealants and adhesives. It has good applications in waterproof canvas, floors, and polyurethane coating in synthetic leather.

Flyprene SIS 1105 is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 15% (wt.%). It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flyprene SIS 1126 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 16% and 50% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 191’s is obtained by hydrogenating cracked C5 to achieve high-quality, multi-purpose, water-white thermoplastic hydrocarbon resin. This C5 hydrogenated hydrocarbon resin is mainly used for hot melt adhesives, and hot melt pressure sensitive adhesive tackifiers. It has good thermal stability, low odor, and good compatibility with SIS, APAO, etc.

Flyprene SIS 1124 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 14% and 25% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 106 - P is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Flytac 106 - F is a medium hard, pale thermoplastic resin designed primarily as a tackifier for various types of polymer and elastomer-based adhesives. It is a pentaerythritol ester of a rosin that has been stabilized by hydrogenation. In adhesive formulations, it contributes improved resistance to oxidation, greater heat stability, better retention of color, and greater retention of tack-imparting properties than ordinary rosin ester resins. For cosmetic applications such as mascara, the INCI name for Pentalyn H-E is Pentaerythrityl Hydrogenated Rosinate.

Dragonox® 1726 is an effective thermo-oxidative stabilizer for adhesive materials. It is also suitable for SBS/SIS block copolymers and polyurethane sealants.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flyprene SIS 1106 is a clear, linear triblock copolymer based on styrene and isoprene. It has a polystyrene and diblock content of 15% and 17% (wt.%) respectively. It is used as an ingredient in formulating adhesives, sealants, and coatings. This product can also be used as a modifier for bitumen and polymers.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

IMSIL® A-30 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-75 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

DeCAL DeCAL 1105+ is a new acrylic copolymer emulsion in water. This medium molecular weight hydrophobic polymer provides a rheological control effect through extensive swelling and association in alkaline conditions, providing film building and leveling. For interior and exterior matte and semi-gloss paints, this product improves flow and leveling performance, sag resistance, and anti-settling. It also results in much less spattering in paints applied by roller.

IMSIL® A-15 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® 1240 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-25 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

IMSIL® A-10 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

DeCAL PS 14 rheology modifier allows the paint formulator to adjust medium and high shear viscosities to improve tool load, film build and brush drag. In order to obtain the best balance of flow and sag resistance it can be used in combination with other thickeners, of natural or synthetic origins.

IMSIL® A-8 is a microcrystalline silica filler that is produced from an inert, naturally occurring alpha quartz with a unique grape-like morphology. Easily wetted and dispersed in either solvent or water-based systems, IMSIL® is selected for its excellent tint retention, durability over prolonged exposure, and resistance to dirt and weathering.

Hi-Sil® T-600 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-600 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-600 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

HIFILL® Air Floated Clay Filler 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® Air Floated Clay Filler 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 15 is a ground calcium carbonate filler produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have exceptional whiteness and are ideally suited for use in brightly colored, contractor-grade trade paints and masonry coatings. Its low oil absorption can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Hi-Sil® T-152 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-152 is a premium-grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-152 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

HIFILL® Air Floated Clay Filler 15 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

HIFILL® 18 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.

Hi-Sil® T-800 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-800 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-800 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

Hi-Sil® T-700 is a thickening agent that belongs to PPG's Hi-Sil® product line of synthetic, amorphous, precipitated silicas that are rheology modifiers and anti-sag/suspension agents. Hi-Sil® T-700 is a premium grade thixotrope designed specifically for adhesive and sealant applications. Its unique physical characteristics make Hi-Sil® T-700 thickening agent a more efficient and cost-effective alternative to fumed silica in certain applications.

HIFILL® 17 is a calcium carbonate filler and reinforcer that is produced from a uniquely occurring, high-brightness calcite feedstock. HIFILL® grades have low oil absorption, which can help maximize loading levels in either water- or solvent-based systems with only a minimal impact on viscosity.