Products in Adhesives & Sealants: Polyvinyl Chloride (PVC)

EPOXOL® EP193 is a Bio-Base Plasticizer and Coalescent for paints and related applications. It exhibits excellent compatibility with a variety of chemistries, is non-fugitive, and Ultra Low VOC’s. As a coalescent, Epoxol®EP193 has a very high partitioning coefficient and low HLB, providing superior low temperature and low humidity coalescence while maximizing dirt pick-up resistance. As a plasticizer, Epoxol®EP193 is an excellent, non-hazardous alternative to solvents, phthalate, benzoate, and citrate-ester plasticizers applications including coatings, caulks, sealants, and adhesives. It shows good stability and is an affective acid scavenger. Epoxol®EP193 has a high Bio-Based content and is an excellent choice for renewable formulations and low VOC systems.

RELEASE K 100 DI is a synthetic polymer with high molecular weight in a 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting point (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber and/or acrylic adhesives. RELEASE K 100 DI is produced through a particular polymerization tecnique completely free of heavy metal catalysts. The product does not contain silicone components.

EVERSTAB P is a strong absorber of UV radiation. It has excellent photostability to polymers against UV light exposure in many ways i.e. retarding color yellowing, preventing embrittlement, maintaining of mechanical properties etc. EVERSTAB P is particularly effective in styrenic polymers, PVC, unsaturated polyesters, polyurethane, acrylic polymers adhesives

MICROCARB NF3T is a surface-coated very fine Calcium Carbonate powder with good dispersion properties, manufactured from a high purity white Calcium Carbonate.

RELEASE K100 H DIL. 2,5 is a polyvinylcarbamate in solvent solution.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

RELEASE PP 100 is a synthetic polymer in a 100% solid form. It is usually dissolved in aromatic solvents (toluene, xylene). It is a very efficient release agent for adhesive tapes based on following films: PP, PE, PET and PVC, coated with natural rubber, synthetic rubbers, hot melts and acrylic adhesives.

BLS 1130 (104810-48-2 & 104810-47-1)is a liquid benzotriazole UV absorber that provides outstanding light stability to industrial and automotive coatings. It blends easily and disperses completely, reducing loading requirements and virtually eliminating particle dispersion problems associated with solid UV absorbers. The liquid form is also highly compatible with a wide variety of coating systems, including waterborne and solvent-based systems. BLS 1130 is also useful as a light stabilizer in other applications including plastics, adhesives, and sealants.

Kanatol 4M (DBM) is clear, colorless and almost odorless liquid. also used in co-monomers such as the vinyl acetate, vinyl chloride, vinylidene chloride and so on, having the effect of increasing the bindability and internal plasticization; also can be used as the plasticizer of the PVC resin and methacrylic acid resins; as the solvent, it can be used for prepareing the chromophotograph emulsion and special type ink, etc.; it also can be used as the gelation accelerator, adhesive, vapor-phase chromatography fixing solution, anticorrosive additive, insecticide, bactericide and surfactant.

Kanatol 9M (DINM) is clear, colorless oily liquid with characteristic ''ester'' odor, It is not miscible with water but soluble in organic solvents. K-9M is an unsaturated reactive este.r It readily copolymerizes with vinyl acetate, vinyl chloride, acrylates ant styrene. The Size of the DOM molecule reduces crystallinity and provide permanent internal plasticization.

ACCR 106 is a fine white powder. It is processed from white marble.

Alteo SH150 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

Micronized Products Mica 60# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

TRIOBAN PC DKW is a blend of hydrocarbons with fatty acid esters.

RELEASE K100 H DIL. 2 is a polyvinylcarbamate in solvent solution.

MICROCARB NF2 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Alteo SH60 is used in a wide variety of applications and polymer systems which consists of low fines content and a very well defined topcut. It is available from from 25 to 4 microns.

RELEASE KB 100 H is a synthetic polymer with high molecular weight in 100% solid powder form. When in solution, it is a very efficient release agent for polyolefins and substrates with low melting points (PE, PP, PVC, PET), coated with natural rubber, synthetic rubber, acrylic and hot melt adhesives. The product is silicone free.

UPC Group DEHP (DOP) has good compatibility with PVC and high plasticizing efficiency. It is the most widely used general-purpose plasticizer and has the average performance of various plasticizers. The maximum dosage is 150 phr.

Niknam Chemicals Zinc Hydroxystannate has excellent flame retardant and smoke suppression properties of ZHS. Further, this can be used in Flame Retardant Low Smoke (FRLS) & Halogen-Free Flame Retardant (HFFR).

Cuts UV rays with a stronger emphasis on functionality. Used in sunscreen lotion, cosmetics, and about 80% of plastic products, UV-protection products are now firmly entrenched in the market, and customers tend to be more conscious of functionality. New possibilities for UV absorbers are being explored to respond to changes in people's needs. We are using our flexible ideas and development capacity to our advantage as we target the development of custom-made UV absorbers that will satisfy and please each and every one of our users.

Gold Reef Speciality Chemicals GR 1102 is polymer composed of crosslinked and polyvinyl acetate copolymer emulsion.

Benetex OB Plus (7128-64-5)is a heat resistant, solvent soluble, chemically stable fluorescent whitener that provides brighter looking colors. It is used to offset the yellowness of a polymer and to yield a whiter appearance. Optical brighteners create brilliance by absorbing UV light, modifying the wavelength of the light and then emitting the light in a fluorescent fashion. Benetex OB Plus can also be used as a tracer in various applications and as an optical brightener in thermoplastics, coatings, printing inks, dyes, man-made fibers, waxes, fats, and oils. This fine powder form is ideally suited for: 1.) screen printing applications where reduced clogging of equipment is critical to increase productivity and 2.) clear-coat applications where efficiency of dispersion and a smooth coating appearance is needed

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

ACCR 104 is a fine white powder. It is processed from white marble.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

BNX 1225 TPR is a 45% active pelletized concentrate of the antioxidant blend BNX 1225 in an SIS (styrene-isoprene-styrene) thermoplastic rubber. The BNX 1225 component is a synergistic blend of BNX 1010 and Benefos® 1680 at a 1:1 ratio, which provides excellent heat stability and oxidation resistance. It also exhibits good compatibility with resins and excellent extraction resistance. The SIS component has a styrene content of 14%, diblock content of 12% and a melt index of 9.