Products in Industrial Manufacturing

GS® 424 Sealant is a non-curing polysulfide base sealant. The outstanding features of this sealant is its resistance to oil, jet fuel, gasoline, and solvent even at elevated temperatures of 180°F (82°C).

Silquest™ VS-604 silane typically provides excellent performance in the potentially cost-effective production of moisture crosslinkable silylated polyolefin compounds. It is a modified vinyltrimethoxysilane that may be considered for use in the manufacture of pipe, wire and cable and industrial goods.

AGITAN DF 6120 is a defoamer for all common emulsion systems. It provides the following properties which controls foaming and aeration during paint manufacture, filling and application, extremely cost effective, good compatibility in a wide range of systems, long lasting efficiency.

Esacure KIP 75 LT is a liquid mixture of Esacure KIP 150 (75%) and Tripropyleneglycoldiacrylate(25%). It is an oligomeric polyfunctional α-hydroxyketone characterized by high reactivity and non-yellowing properties. It is particularly recommended when low odor is a required characteristic.

Esacure TZT is particularly indicated for the photo polymerisation of UV curable systems when high reactivity, low curing odor and low yellowing are required. The radical generation occurs via hydrogen abstraction by the action of a co-initiator such as tertiary amines.

TAFIGEL PUR 82 is designed as an “associative thickener” which builds up and stabilizes viscosity by forming a network between polyurethane, binder molecules and other paint ingredients. TAFIGEL PUR 82 can be used alone or in combination with other TAFIGEL thickeners, as well as with further thickener technologies. Aqueous gloss paints, thickened with TAFIGEL PUR 82 show minimal pseudoplasticity, similar to the rheology of solvent borne systems. TAFIGEL PUR 82 is recommended for use in following systems: Interior and exterior paints, latex paints, anticorrosive paints, adhesives, and printing inks. TAFIGEL PUR 82 is suitable for indirect food contact applications.

PHOTOMER® 6639 is a low viscosity tri functional aliphatic urethane acrylate, which gives good chemical and mechanical resistance in combination with high flexibility

PURETOL™ 380D is an odorless and colorless Europe grade white mineral oil with a Saybolt viscosity of 380 and a specific gravity of 0.868. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets the purity requirements of European Pharmacopeia (Ph. EUR.) - Paraffin, Liquid and United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Taconic 7038 PTFE-Glass Fabric is a Standard Grade PTFE-Glass Fabric is used in the widest range of applications due to its combination of high performance and moderate price. Applications include release sheets on heat-sealing machines and laminate presses, release surface for paints, adhesives and food products, gaskets, seals and bearings for chemicals, oils, and gasses, thermal insulation for high-temperature and chemical-resistant applications and covers on hot platens, chutes, hoppers and troughs.

Omnistab IN 518 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

SureTac 9227 is a family of tackifiers that include Rosin Ester, C5 Aliphatic, C9 Aromatic, and C5/C9 Aliphatic/Aromatic, and Specialty Resin Dispersions. The product line offers a variety of softening points and may be modified to meet a specific application.

PURETOL™ 9D is an odorless and colorless Europe grade white mineral oil with a Saybolt viscosity of 85 and a specific gravity of 0.858. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets the purity requirements of European Pharmacopeia (Ph. EUR.) - Paraffin, Liquid and National Formulary (NF) - Light Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

PHOTOMER® 4703 is a proprietary UV/EB curable monoacrylate with low viscosity. It is designed for use in laminating adhesives, etch-resist inks for printed circuit boards, negative photoresists and OPV's for paper and films.

GS® 127 Sealant is a partially cross-linked butyl rubber base extruded sealant that provides a tenacious surface bond to most clean dry surfaces.

A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

PURETOL™ 13 is an odorless and colorless white mineral oil with a Saybolt viscosity of 130 and a specific gravity of 0.853. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets National Formulary (NF) - Light Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton D1101 A polymer is a clear, linear block copolymer based on styrene and butadiene bound styrene of 31% mass. 

Omnirad 4265 is a highly effective liquid photoinitiator blend, used for UV-polymerisation of suitable resins. Omnirad 4265 is easily incorporated into waterborne formulations.

Omnivad SB Flakes is an organic filler. For absorbent substrates Omnivad SB Flakes can act as a hold-out additive, preventing low viscosity coatings or inks from soaking into the substrate. This additive will help with enhancing higher gloss, increase color strength and improve cure. This Resin is compatible with radically curable inks, coatings and adhesives.

PHOTOMER® 6578 is a low viscosity tetra functional aromatic acrylate, which gives very good abrasion and scratch resistance in combination with high flexibility.

Photomer® 8061 is a novel aliphatic monofunctional acrylate (TPGMEMA) of low skin irritancy, low viscosity, low surface tension and low odor. It exhibits good solvency and viscosity reducing characteristics with typical UV/EB curable oligomers and prepolymers.

Esacure KIP 100F is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%) and is particularly recommended for high reactivity, low odor and color stability.

AGITAN DF 6681 is a defoamer for all common emulsion systems. It provides the following properties which Controls foaming and aeration during paint manufacture, filling and application, Good compatibility, Effective over a wide range of pH and temperature, Contains hydrophobic silica, Long lasting efficiency, Forms very stable emulsions in water, Retains high efficiency.

Kraton D1155 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 40% mass. It is supplied from Europe in the physical form identified below. Kraton D1155 ES - supplied as porous pellets dusted with amorphous silica Kraton D1155 E is used in the modification of polymers and in compounds for technical and footwear applications. It is also used in formulating adhesives, sealants and coatings and as a modifier for bitumen.

GS® Hot Melt is a black extruded sealant that was primarily formulated and designed to be used in conjunction with heat shrinkable tubes and sleeves.

AGITAN 170 is a highly effective defoamer for aqueous emulsion based and water reducible systems. Due to its emulsifiability in water the defoamer is ideal for medium to high viscosity systems. AGITAN 170 is suitable for pigmented as well as non-pigmented systems.

Shandong Huijin Chemical HJT-31D epoxy resin curing agent is reacted from the phenolic resin modified ethylene diamine, according to customer's different requirements, we add different agent to our product, so that our products will be more suitable for domestic and abroad market.

Photomer 5442 is a modified polyester for printing inks. Photomer 5442 exhibits excellent pigment wetting and good flexibility.

AGITAN 280 is a highly effective and well dispersible defoamer for aqueous emulsion based and water reducible systems.

Silquest™ A-Link 597 silane functions as an adhesion promoter for a variety of substrate/matrix resin combinations. It is especially useful in high performance hot melt adhesives and other applications where exposure to sustained temperatures might occur.

Gaskets International GDSA-1 is used in applications like OEM equipment install and replacement seal install.

AGITAN DF 581 B is a defoamer for all common emulsion systems. It provides the following properties that is Extremely versatile, very fast action, non silicone based, Effective under acidic and alkaline conditions.

PHOTOMER® 5042 is a tri functional chlorinated polyester acrylate diluted in 40% Photomer® 4006. It has been designed to provide adhesion to substrates like metals, wood and plastics such as polyethylene (PE) and polypropylene (PP).

Photomer® 4003 is a monofunctional aromatic acrylate of low viscosity, moderate odor, good cure speed and is classified as a skin irritant and sensitizer. Due to the monofunctional character of its backbone, it has been found useful as a flexibilizer and as an adhesion promoter. It is suggested for use in UV/EB curable flexo, screen and flexographic inks, clear coatings and lacquers.

Omnirad BCIM is a versatile highly effective photoinitiator for UV polymerisation of mono- or multifunctional (acrylate-) monomers.