Products in Other Adhesives & Sealants Applications

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Bis(trimethoxysilylpropyl)amine. Clear to yellowish transparent liquid appearance. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Andisil® 186 Silane is used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

PEL-CAT™ 9666 Most delayed action trimerization catalyst, suitable for CASE Applications. When used as a co-catalyst, improves wet out and flow without significantly extending overall cure time.

OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

Santicizer® 148 is a fast-fusing, non-halogen, fire retardant plasticizer used in multiple polymer systems. This plasticizer is recommended for applications where there is a need to reduce the risk of fire. Santicizer® 148 helps to suppress smoke during combustion of materials it is used in. In PVC, Santicizer® 148 acts as a high solvating plasticizer, offering permanence, faster fusion and high plasticizing efficiency.

Andisil® 6021 Silane is a bifunctional silane possessing a reactive amino groups and hydrolysable methoxysilyl groups. The dual nature of its reactivity allows it to bind chemically to both inorganic materials (e.g. Glass, metals, fillers) and organic polymers (e.g. Thermoplastics, thermosets or elastomers).

IGI® 2202A is a semi-refined, low-melt, scale wax that is used in a variety of applications including; candles and chlorination.

Optical Brighteners are recommended for leak detection and product identification when exposed to UV light. These brighteners are highly fluorescent under UV light (black light). They also offer good solubility and thermal stability.

OMNISTAB® UV 1130 acts as a UV absorber belonging to hydroxyphenyl benzotriazole class which imparts good light stability to a variety of polymers. It is a pumpable liquid useful in a variety of substrates and applications.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

E101 is formulated APAO polymer which is mainly used in personal hygiene, baby diapers, nonwoven gowns and drapes, incontinence mattress pads, nonwoven dental bibs, pet training pads, mattress assembly, foam bonding, fiber optic assembly.

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

AdvaBond® 8203 is a chlorinated polypropylene resin solution that provides excellent adhesion to polyolefinic substrates, especially PP, TPO and EPDM. AdvaBond® 8203 can be used as a primer or as an additive to a coating or adhesive formulation.

NVC colorants are high tint strength, zero VOC water-based conventional color dispersions. These glycol free aqueous dispersions utilize dispersant and surfactant blends offering a wide range of compatibility for water-based systems. The minimum 6. 0 on the Hegman Gage make these dispersions suitable for tinting semi-gloss and gloss latex enamels.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

OMNISTAB® AN 1010 is a pentaerythritol tetrakis[3-[3,5-di-tert-butyl-4-hydroxyphenyl]propionate. It is a sterically hindered phenolic primary antioxidant.

MICROSERE® 5910A is a high-melt, microcrystalline wax that is used in a variety of applications including; plastics, adhesives, candles, cosmetics, food coatings, inks, lubricants, personal care, polish, and textiles.

RT6275 is Formulated Ethylene Copolymer which is mainly used in Automotive bilaminate interior applications below the beltline, Point of sale display, Woodworking, Office furniture, Foam bonding, Automotive cabin air filters, HVAC filters, Electronics - overmolding/low pressure molding systems.

Andisil® OH 300,000 is a Silanol terminated fluid.Andisil® OH Polymers are a series of silanol functional fluids with various viscosities and silanol contents. They are useful in the treatment of fillers and as Anti-Structuring additives in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. The low viscosity grades can be used as reactive diluents for high viscosity polymers to adjust the overall viscosity of the formulation. They have excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. Andisil® OH products are pure and do not contain any plasticizers or additives. Curing of the Andisil® OH series can be achieved by all usual condensation crosslinkers (i.e. Alkoxy silanes, oxime silanes, acetoxy silanes) in conjunction with catalysts—the use of dibutyl tin dilaurate or stannous octoate have been found effective as catalysts for these reaction.

INTERFLO® 66 is a high melting point hydrocarbon wax which is used as an efficient and economical external lubricant for extrusion of rigid polyvinyl chloride. The addition of minor amount to the compound in conjunction with lubricants improves the processability and also the appearance of the finished product.

Santicizer® 160 is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer has compatibility in many polymer types, particularly in PVC. Santicizer® 160 can be used as a primary plasticizer or is often blended with general purpose plasticizers to offer faster fusion and better plasticizing efficiency. Together, these properties generate savings in faster production throughput, lower oven temperatures, and lower total plasticizer loadings. Santicizer® 160 is a well-recognized plasticizer utilized in many industrial PVC applications, processes like cleaning/purging, and as a carrier for biocides, pigments, and other additives.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Santicizer® 1462 is a modified alkyl aryl phosphate ester for flexible PVC products that must meet stringent flame retardancy standards. Santicizer® 1462 is specially recommended for plastisol applications where critical processing conditions must be combined with high fire-retardancy of the end product. In vinyl nitrile foams, Santicizer® 1462 imparts a significant level of fire retardancy and helps foamed products meet certain specified flammability performance criteria. Santicizer® 1462 also acts as a processing aid and contributes to excellent cell structure in chemically blown foams.

PARAFFLEX® 4630A is a soft, smooth and creamy looking blend specially formulated for single pour container candles.

Cuyahoga Plastics EB5000-1 is A U.L recognized, flame retardant, mineral-filled, glass fiber reinforced polyester thermoset molding compound suitable for compression, transfer, and injection molding. It is currently supplied in bulk form, cut preforms, and box length extrusions.

IGI® 0431G is a crude paraffin slack wax with relatively high oil content and melting point

AIT Colorants are high tint strength color dispersions of quality conventional pigments in water and glycol used primarily for aqueous in plant tinting. AIT dispersions are available in many standard colors and are also produced as custom color matches.

Andisil® MOS is a Methyl tris(MEKO)silane. Andisil® Oximes are liquid raw materials for neutral condensation curing silicone sealants. In the presence of a (tin) catalyst these silanes react with hydroxyfunctional silicone polymers; exposure to moisture results in the formation of crosslinked, elastomeric silicones. In contrast to acidic or basic curing systems, no acidic acid or amine, but 2-butanoneoxime is liberated during application. Due to the neutral character of 2-butanoneoxime, sealants based on Andisil® Oximes can be applied even on (corrosion) sensitive substrates like metals or marble.

IGI® 6046A is a specialty formulation for use in container candles

Epoxy functional silane used used to improve dry and wet strength in cured composites reinforced with glass fiber rovings. Silanes are used in a variety of industrial applications. Organofunctional Silanes have an organic functional end group and an alkoxy functional end group which allow the silane to act as a bridge between organic materials and inorganic substrates. The organic functional group is matched to the resin system while the alkoxy group provides the reactive site for crosslinking. These materials are useful as adhesion promoters, crosslinking agents, surface modifiers and hydrophobizing agents.

Santicizer® 261A is a fast fusing, benzyl phthalate plasticizer designed for use in multiple polymer systems and applications. This plasticizer is a C7-C9 alkyl benzyl phthalate that has compatibility in many polymer types, particularly in PVC.