Products in Other Adhesives & Sealants Applications: Polyolefins

Superchlon® E-415 is developed with special technology are the waterborne chlorinated polyolefin, which shows excellent adhesion to polypropylene substrates and can be used as primers and adhesives.

Adiplast Wax HM is polyethylene wax used in adhesive manufacturing.

Microcarb® designed to be used in the production of water based coatings and paints allow for matt to gloss finishes, offering a good balance between coverage, whiteness and stability (Low Binder Demand). In addition, ultrafine qualities allow for the reduced consumption of titanium dioxide and other expensive extenders like PCC and Aluminum silicate.

SCG Chemicals WD2020P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

DONGRAY® PE WAX 300A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

AUROREN® 200 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 200 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 200.

KELAILI® PE WAX KL-10 is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

SCG Chemicals LP1060P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LPIO6OP is guaranteed its high quality for various applications.

CERALENE® 1X is a low density polyethylene wax with a typical average molecular weight of 1200 MW.

Kolon Industries HIKOTACK® P-120 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

GRP EPDM RECLAIM GRP EPS60E is a high quality reclaim manufactured from EPDM factory reject profiles. EPDM Reclaim is one of the most commonly used reclaim rubbers having both general-purpose and specialty applications. It is primarily used in automotive, construction, consumers and mechanical goods applications. The vulcanization properties of GRP EPDM Reclaim make it particularly suitable for a variety of EPDM Rubber products.EPDM Rubber is M-class synthetic Rubber. EPDM stands for ethylene propylene diene monomer (M-class) rubber. EPDM rubber is a terpolymer of ethylene, propylene, and a diene-component. Generally, ethylene content is around 45% to 85% in EPDM Rubber. Higher ethylene content gives the higher the loading possibilities of the polymer, better mixing, and extrusion. The key properties of EPDM are its outstanding heat, ozone, and weather resistance. EPDM rubber have excellent electrical insulating properties. EPDM rubber have also very good resistance to polar substances and steam.

Kolon Industries HIKOTACK® P-140 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are vehicles for ing ink. This grade especially shows superior compatibility with rosin modified phenolic resin, so it can be used with phenolic resin in off-set ink to decrease set time and to increase gloss. This grade also can be used as binder for color asphlat and tackifier for EVA based hot melt adhesive(HMA). .

KVIS 30 is the trade name of Kothari’s slightly higher molecular weight polyisobutylene, ranging from 1250 to 1350. KVIS 30 is widely used by our customers as a cling additive in stretch / cling film manufacturing (either incorporated directly into film extrusion or through a PIB masterbatch) and sealants.

SCG Chemicals LP1040T is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40T is guaranteed its high quality for various applications.

Marcus Oil and Chemical M200 is a low molecular weight polyethylene wax which comes in in liquid, pastille, flake and powder form for convenience of use.

AUROREN® 100 is a specially modified polyolefin resin newly developed with Nippon Paper Industries Chemical Division's original technology. AUROREN® 100 shows excellent adhesion to non-polar substrates such as polypropylene and polyethylene. Good solubility in non-aromatic solvents is also a great advantage of AUROREN® 100.

Kolon Industries HIKOTACK® P-120H is a pale yellow thermoplastic resin obtained from the copolymerization of aromatic olefin generated in the thermal-depolymerization process of naphtha. This product offers good solubility with various solvents and excellent compatibility with various polymers, and is mainly used as an additive for paint, ink and tackifier resin for Ethylene Vinyl Acetate (EVA) type hot melt adhesive (HMA). .

DONGRAY® OPE WAX 600A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Adiplast Wax AD - 115 is polyethylene wax used in adhesive manufacturing.

DONGRAY® PE WAX 200A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

TRECORA POLYETHYLENE WAX – TRECOR HMA-1 is a High Density Polyethylene Wax with a narrow molecular weight distribution. It is designed for use in Hot melt adhesives intended for the packaging industry to provide heat resistance, reduce the viscosity of the HMA formulation, and also control open and set time.

Adiplast Wax AD - 80 is polyethylene wax used in adhesive manufacturing.

SCG Chemicals WD2110P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Wax granules and powders

Kolon Industries HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. HIKOTACK® P-90 is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. The major usages are rubber compounding agent for tires, tubes, rubber coated clothes. And this grade also can be used as tackifier for Ethylene Vinyl Acetate(EVA) based hot melt adhesive(HMA), water repellent agent, concrete, curing agent and binder for asphalt. .

DONGRAY® OPE WAX 610A is widely used in pipes, inks, coatings, cable fillings, hot metal products and textile processing industries.

Adiplast Wax AD-10 is polyethylene wax used in adhesive manufacturing.

TRECORA POLYETHYLENE WAX – CWP400 E is a High Density Polyethylene Wax intended for use in general purpose Hot melt adhesives to reduce viscosity and control open and set times.

avenia B3706 is slight color fluctuations can occur in adhesives, depending on the raw materials and processes used. the first avenia hot-melt adhesive for the concrete industry. this low-odor hot-melt adhesive has very good oxidation stability in the melt. the avenia b63706 reliably bonds eps and all materials commonly used in the concrete industry, such as junction boxes. in practice with common separation agents, it proves its high adhesive power. in spite of the high adhesive strength, it can be removed from the pallet without leaving any residue. in this way, it achieves the desired balancing act in the manufacturing process.

Adiplast Wax AD - 70 is polyethylene wax used in adhesive manufacturing.

Adiplast Wax AD - 100 is polyethylene wax used in adhesive manufacturing.