Products in Packaging & Paper

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 102 is a slightly yellow, transparent solid made from gum rosin through esterification with pentaerythritol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA base hot melt glue sticks Bookbinding Pressure-sensitive adhesive based on SIS or SBS adhesive Emulsion and paints based on NR and CR

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Syntran® PA-1475 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

Syntran® 1950C is based on Interpolymer Corporation's unique styrenated acrylic technology. This technology creates a film with a very high gloss and fast dry times. This technology also allows for excellent adhesion over multiple substrate types. This milky dispersion is used in floor finishes, household, label, board, and packaging coatings (OPV).

Syntran® 3211 is based on shell-core technology. This technology creates a film with very high gloss, block resistance, rub resistance, and printability with multiple ink types. This technology also allows for excellent adhesion over multiple substrate types. This milky dispersion is used in label, board, and packaging coatings (OPV).

Syntran® 6209 is based on high-solids technology. This technology creates a film with very high flexibility, excellent water resistance, and excellent coverage. This technology also allows for excellent adhesion over multiple substrate types. This white emulsion is used in adhesives, textile and leather coatings, pigmented coatings and sealants, label, board, and packaging coatings (OPV).

Syntran® PA-1465 is based on a patented acrylic-olefin graft technology. This unique incorporation of olefin onto the backbone of the acrylic increases the wear resistance and stability of the formulation without sacrificing the burnishability of the wax when used in a floor finish.

SYNTHOLUX 1014 W is an aqueous, aliphatic polyurethane dispersion that is physically drying and UV-curable. It does not contain emulsifiers or co-solvents. It is recommended to use it as a coating for wooden substrates that show high elasticity and good chemical resistance. It has applications in industrial coatings, furniture coatings, wood flooring, other packaging, and paper applications.

SYNTHALAT A 1653 is a polyisocyanate-curing acrylic resin. Used in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-pack high-gloss, high-build polyurethane coatings, particularly suitable for coating furniture. It has applications in industrial coatings, metal coatings, furniture coatings, and other printing, packaging, and paper applications.

SYNTHOLUX BW 2223 is a radiation-curing, tin-free UV-dispersion with good mattability and excellent chemical resistance. It is suitable for waterborne wood application and has very good matting behavior. This product can be used for clear and pigmented coatings. It has applications in furniture coatings, industrial coatings, wood flooring, other packaging, and paper applications.

SYNTHOLUX 432 PAA is a radition-curing, amine-modified, low-viscosity polyether acrylate. It is recommended to use it as a sole, highly reactive binder or together with other radiation-curing binders to increase flexibility. It has applications in industrial coatings, furniture coatings, wood flooring, automotive OEM coatings, and other printing applications. 

SYNTHOLUX 271 UA is a radiation-curing, aliphatic urethane acrylate dissolved in a reactive thinner. It is recommended to use it as a coating wood and paper. It can also be used as a sole binder or together with other radiation-curing binders to increase flexibility. It has applications in wood flooring, industrial coatings, furniture coatings, other packaging, and paper applications.

SYNTHOLUX 197 PE is an aadiation-curing, low-viscosity polyester acrylate resin that is solvent-free. It is used in UV- and electron beam-curing primers and top coats for wood, paper, plastics, and printing inks. It has applications in construction adhesives, industrial adhesives and sealants, wood coatings, and finishes.

SYNTHALAT D 272 is a long-oil isophthalic acid alkyd resin. This is suitable for VOC-compliant wood stain, glaze, and clear coats with good penetration and weather resistance. It has very good compatibility with various medium- and long-oil alkyd resins. It has applications in industrial coatings, Craft and hobby, furniture coatings, wood flooring, and other packaging and paper applications.

SYNTHALAT A 1633 is an acrylic resin cross-linked with polyisocyanate. It is used in combination with aromatic and aliphatic polyisocyanates for fast-drying 2-component polyurethane coatings, particularly for coating furniture. It is a fast-drying polymethacrylate that permits the manufacture of very quick-drying 2-component coating systems. These coatings are suitable for industrial furniture coatings and other wood coatings. It has applications in wood flooring, metal coatings, furniture coatings, and other printing applications.

SYNTHOESTER 1110 is a branched, saturated polyester containing hydroxyl groups. Used in combination with aromatic polyisocyantes for air- and stove-drying two-component coatings. It is used with desmodur L as the crosslinking partner for anti-corrosive primers with excellent adhesion. It has applications in industrial coatings, wood flooring, furniture coatings, packaging, and paper applications.

SYNTHOLUX BW 2096 is a radiation-curing, tin-free UV-dispersion with very excellent mattability and good chemical resistance already after physically drying. It is suitable for waterborne wood application with very good grain enhancement and very good matting behavior. Surfaces are re-emulsifiable before UV curing. It has applications in industrial coatings, furniture coatings, wood flooring, other printing, and packaging applications.

SYNTHOLUX 475 PE is a radiation-curing, fatty acid-modified polyester acrylate. It is used as a sole binder or combined with other radiation-curing binders for use in UV-curing printing inks. The resin is distinguished by its good pigment wetting. It has applications in furniture coatings, industrial coatings, wood flooring, and other printing and packaging applications.

SYNTHALAT A 1613 is an acrylic resin that forms air- and oven-drying two-component lacquers when combined with aromatic and aliphatic polyisocyanates. These lacquers are primarily suitable for wood and plastic coatings and cure quickly at low curing temperatures. It has applications in furniture coatings, wood coatings, and finishes.

Synprint AC 2910 is an inherently matte acrylic polymer. This technology produces a film with low gloss without the additional use of waxes or powders and brings flexibility and excellent stability while providing excellent adhesion to various substrate types. It is recommended to be fortified with another resin, such as Synprint AC 5151 or similar, to improve the overall film properties.

Synprint AC 5151 is an acrylic polymer based on multiphase technology. This is a proprietary process that combines two different types of polymers in the same polymer network. It allows a balanced combination and an overall improvement of the physical properties of the two polymers. Synprint AC 5151 forms a film with very high gloss, blocking resistance, rub resistance, and printability with various types of inks. It also exhibits excellent adhesion to various substrates.

KAFRIT ST 0C010 LD is excellent for the process stabilization of HDPE monofilaments and slit tapes. It serves as an antioxidant and is compatible with high-density polyethylene (HDPE). With features like good thermal stability, processing stability, and recyclability, it is used in polyethylene (PE) and resin-based materials in the printing and packaging markets.

CONSTAB AT 04190 PP is a product that functions as an anti-static agent. It is labelled as food contact acceptable and uses polypropylene (PP) as its carrier. The features include good printability, food contact acceptability, and low blooming. The product is used in the adhesives and sealants and printing and packaging markets, specifically for tape and label adhesive applications.

CONSTAB FL 18140 PP is a special blend of fillers and pigments designed for in-mold labels. It serves as a filler and extender, pigment, and cavitation agent in white color. With features like deep cavitation, good gloss, recommended opacity, and metallizability, it caters to the adhesives and sealants as well as printing and packaging markets.

CONSTAB MAT 02420 is a special matt compound for in-mold labels, functioning as a flattener. It is compatible with polypropylene (PP) and is used for labels. The product features high melt flow and good melt reception. It is used in the adhesives and sealants, printing, and packaging markets.

CONSTAB FL 18214 PP is a white pigment and cavitation agent product that is good for low-density films and wrap-around labels. It belongs to various product families, such as additive masterbatches, color masterbatches, pigments and colourants, and surface modifiers. This product features excellent opacity, high gloss, low density, and is metallizable.

KAFRIT UV 0J670 LD is an excellent UV stabilizer designed for monofilament and slit tape nets, making it an ideal choice for applications that require superior UV stability. This UV masterbatch offers low die build-up, making it well-suited for use in thin films, tapes, and fibers, as well as coated woven PE fabrics.

CONSTAB MA 00960 is a skin layer compound that aims to provide a paper-like appearance for labels, graphic arts, and packaging. It functions as a filler and extender and is compatible with polypropylene (PP). It serves markets such as adhesives and sealants, printing, and packaging, with applications like tape and label adhesives and tapes and labels.

P.A.T Sucrose Benzoate is a product recognized for its excellent UV stability, clarity, lack of color, and low solution viscosity. It yields films with outstanding depth or fullness of gloss and demonstrates a broad range of compatibility with numerous resin systems. This compound is thermally stable and resistant to hydrolysis under weakly acidic or alkaline conditions. Notably, sucrose benzoate holds FDA approval as a component in food packaging adhesives.

Texicryl® 13-217 is an APEO free self-crosslinking acrylic copolymer emulsion characterised by a soft film giving, after crosslinking, a high resistance to washing and to primed or printed fabrics. It is ideal for the manufacturing of non woven fabrics and as flocking adhesive by spraying, in full bath or by foaming.