Brands in Tape & Label Adhesives

Smooth heat transfer is possible by evenly filling the gap between the heating element and the heat sink such as a heat sink or housing with a sircon.

Basonat® polyisocyanates are crosslinkers for two-component Polyurethane coatings for the automotive and industrial coatings industry. Basonat® harderners have an influence on the curing time of the systems.

The leading brand of environment-friendly, waterborne acrylic emulsion technology solutions for adhesives, PSA, architectural binders, thickeners, fabric color deepeners, etc.

Antifatigue agent PL-600 is an and-fatigue agent for rubber. It is mainly used in tire carcass formulas and component formulas adjacent to the carcass to improve the dynamic anti-fatigue performance of the carcass, especially for improving the bonding force of the rubber and cord after aging. effect. And it can effectively improve the heat generation performance of the tire shoulder and significantly increase the mileage of the tire. Used in tapes and hoses, it can replace adhesives A, RS, RH, RE, etc., and can reduce costs and improve adhesion.

1,2-benzisothiazolin-3-one or BIT (CAS: 2634-33-5), the primary active ingredient in Arxada's Proxel® range, is widely recognized as one of the most versatile, compatible and trusted broad spectrum preservative solutions available for the Home Care market. Aside from single-active products based on BIT alone, the Proxel® range also encompasses cost-effective and specialist blends with carefully-identified co-actives providing flexibility of choice for difficult-to-preserve systems. Proxel® GXL and Proxel® AQ have been pre-approved by the EPA for use in Safer Choice labeled products and have been reviewed by NSF International’s Sustainability Program. For consumers the Safer Choice logo provides recognition that the product has been evaluated for its effect on the environment and human health. Utilizing ingredients that are considered the safest in their class. Safety without sacrificing quality or performance.

Often, fillers have to meet very special requirements. In such cases not only good dispersion characteristics are of importance, but also mechanical and dynamic properties of the final products. Improved electrical insulation resistance, better aging and fluid resistance in many materials and improved anticorrosion properties have a crucial role to play in many areas. At Hoffmann Mineral, we developed Aktisil to meet such customer requirements. This special filler is made by treating the surface of Neuburg Siliceous Earth with chemical agents, mostly silanes. The reaction by-products (e.g. alcohol) formed during the manufacture of the different products of Aktisil are largely removed right away during the process. The coupling reaction fixes the silane to the surface of the filler. Any undesirable side-effects that can occur during mixing by direct addition of the silane are virtually eliminated. So the customer can choose from a complete product range of many different types of Aktisil. This is the result of many years of in-house experience and of close cooperation with customers. Know-how for users’ benefit.

Our COPYLENE® polypropylene plant at the Phillips 66 Bayway Refinery in Linden, New Jersey utilizes native propylene feedstock to produce up to 775 million pounds-per-year of polypropylene. From homopolymers to impact copolymers, Phillips 66 offers high quality polypropylene for a variety of consumer and industrial applications. There is a grade of COPYLENE® polypropylene for all your PP needs: blow molding, injection molding, thermoforming and film. Phillips 66 has the newest and most modern polypropylene plant in the U.S. The location at the Bayway Refinery allows for a direct link from the integrated feedstocks to processing, packaging and shipping to customers around the globe. Our location on the East Coast enjoys a secure and mature infrastructure with easy access by truck or rail to our customer base. This strategic location allows our customers peace of mind for potential supply issues. Phillips 66 is a UNIPOL™ PP licensee, an advanced technology of Dow. The UNIPOL™ PP process is highly reliable and provides high product consistency. Licensees of UNIPOL™ PP offer a superior combination of wide product capability and high process flexibility.

SYNPRINT is based on our proprietary self-crosslinking technology. This technology combines two different crosslinking mechanisms on the same polymer backbone, substantially increasing the chemical resistance, water resistance and adhesion to multiple substrates. This technology was designed for the self- crosslinking mechanism to fully cure at room temperature while maintaining long-term shelf stability.

Güpotim - thermally conductive fillers Electrically insulating, low soda (Na₂O < 0.1%)

MAKROSTAB® is a Stabiliser masterbatches (UV and Thermo) are used for increasing the resistance of plastics against thermooxidative and UV degradation. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilisation of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

The VINNAPAS® eco product line stands for polymer dispersions, dispersible polymer powders and solid resins derived from renewable raw materials via the biomass balance approach. VINNAPAS® eco grades are chemically identical to the corresponding basic VINNAPAS® products. VINNAPAS® eco dispersions, dispersible polymer powders and solid resins are manufactured using the biomass balance approach. This means that fossil raw materials are entirely replaced in the supply chain by renewable raw materials that are certified as sustainable. WACKER uses bio-based acetic acid that is a byproduct of the wood-processing industry and is certified as sustainable by PEFC® (Program for the Endorsement of Forest Certification). The bio-based acetic acid is introduced at the beginning of the production cycle. The biomass balance approach mathematically determines the percentage of dispersions, dispersible polymer powders and solid resins made from renewable (non-fossil) raw materials. VINNAPAS® eco grades are certified to the REDcert2 standard and audited by TÜV NORD, an independent German technical inspectorate.

DEHESIVE® products are tailored to applications and have a successful track record of over 30 years of use around the world as silicone release coatings for paper and film. DEHESIVE® silicones set standards in versatility, processability and economy. Thanks to their chemical structure, the organosilicon compounds found in DEHESIVE® silicones have excellent release properties towards sticky substances. Silicone-coated release liners not only adhere to labels to prevent contamination and damage during handling, they can also be peeled off smoothly without loss of adhesive strength. The unique market portfolio is the ideal choice wherever release papers are produced. The advanced technology is ideal for modern applications in the labeling, adhesive tape and food industries.

Tamanol is an environmentally friendly water-based (solvent-free) emulsion tackifier. It is the industry's first environmentally friendly water-based (solvent-free) emulsion tackifier that can be used as an additive in an adhesive to increase its adhesion. This can be used with olefin polymers that inherently have poor adhesive properties to make them stickier. It is used for various types of polymers, such as acrylic, EVA, chloroprene and rubber-based polymers.

FHR offer wide range of polypropylenes specially developed and manufactured to meet the tough requirements of the healthcare industry, through its Medical and Select grade ranges. All products have since years back been produced with additives that are non-animal based and majority of the grades are also produced with phthalate free catalyst systems. Select grades comes with extra supply security as these are based on minimum dual source raw materials, resulting in sustainable supply chain. FHR is technology leader for radiation resistant polypropylene through its polypropylene acquisitions from Huntsman, Rexene and Eastman and offer today worlds widest product range.

DIACRON™ are saturated copolymerized polyester resins used for coatings, inks, and adhesive applications. They have good adhesion to metals, polyester film, polycarbonate, and can be cross-linked with isocyanates, melamine, and epoxies. *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.