Products in Tape & Label Adhesives: Rosins

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE RE 100F rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100F exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

V-TAC™ 8501

TAMANOL E-102A is a terpene phenolic resin emulsion consisting of microscopic particles, especially prepared for use in water based adhesives, such as acrylic emulsions, natural rubber and synthetic rubber latex based adhesives.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

Foreverest Resources Colorless Pentaerythritol Hydrogenated Rosinate PEHR100D is a kind of super light color tackifying polyols resin, which is esterified from refined gum rosin by pentaerythritol, and through series combined technologies units of catalytic hydrogenation. With benefit of light color, low odor, good heat stability and excellent aging resistance, CPEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

Rit-Chem Cambytac is an aqueous dispersion of rosin derivatives. Used as a tackifier in all water-based adhesive systems especially self adhesive labels.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

NOMA Reyder EG 90 is an ester resin from gum rosin, disproportionated and deodorized, with excellent thermal stability.

Resin Chemicals Liquid Rosin Ester is made from the gum rosin through esterification with polylol..

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

West Tech Chemical Ltd WT 820 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

Aquadhes® 6002 is a a water-based rosin ester dispersion and solvent free.

West Tech Chemical Ltd WT 840 is an aqueous, solvent free, anionic rosin ester dispersion recommended as a tackifier for acrylic latex polymers used in label, tape, and construction applications. The use of resin dispersion enhances specific adhesion to polyolefin substrates and recycled corrugated board.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

Aquadhes® 6001 is a a water-based rosin ester dispersion and solvent free.

Foreverest Resources Colorless Pentaerythritol Hydrogenated Rosinate PEHR100E is a kind of super light color tackifying polyols resin, which is esterified from refined gum rosin by pentaerythritol, and through series combined technologies units of catalytic hydrogenation. With benefit of light color, low odor, good heat stability and excellent aging resistance, CPEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVATAC RE 5S liquid rosin ester has broad compatibility with polymers used in flooring and construction applications. With an optimized mixture of resins and plasticizers, SYLVATAC RE 5S can be used as a self-emulsifying blend for water-based acrylic polymers.

Staybelite Ester 10 is the glycerol ester of partially hydrogenated wood rosin.

Foreverest Resources Colorless Glyceryl Hydrogenated Rosinate GEHR100D is a kind of super light color tackifying polyols resin, which is esterified from refined hydrogenated rosin and edible glycerol, and through series combined technologies units of catalytic hydrogenation. With benefits of light color, low odor, good heat stability and excellent aging resistance, CGEHR is mainly used in screen protection film, medicinal patch, diaper adhesive, PSA and HMA.

Tamanol 803L is Rosin modified phenolic resin which are designed as tackifier for adhesives. Tamanol 803L is characterized its high heat stability and wide range compatibility.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

ARDYME R-85 is Arakawa’s polymerized rosin (derivatives of a natural rosin containing dimerized rosin), which is produced at Guangxi Wuzhou Arakawa’s plant. ARDYME R-85 has low metallic contents and is excellent for various applications, including adhesives, inks and soldering flux.