Products in Greenhouse & Tunnel Films

Nevimid 66 A G30 H NERO is heat stabilized. Its used in Automotive & Agricolture Consumer Goods.

KRITILEN® IR550 contains an effective inorganic Infra-Red absorber. Recommended addition in LDPE films is 5%-15% depending on film thickness and required "thermic effect". For LDPE/EVA co-extruded films, recommended addition is 2%-10% depending on film thickness, VA content of the film and required "thermic effect".

Mermas Kimya Eco UV 20 is an additive used to make Packaging Products, Raffia and Greenhouse Nylon.

Plastic is an amazing material that can hold almost one thousand times it’s normal weight. It will get biodegradable over a very long period of time, in some cases 1000 years to break the material down by microorganisms. Degradation of oxo-degradable plastic begins with a chemical process followed by a biological process.

Nevimid 66 A G30 NATURALE is a Polyamide 66 reinforced with 30% glass fiber, natural color. its used in Automotive & Agricolture Consumer Goods

AMPLUS PC12 1010 BK is a polycarbonate general purpose black.

Euro Extrusions LDPE is the low density version of Polyethylene. It has less hardness, stiffness and strength compared to HDPE, but more ductile. This plastic has an optimal density, hard wearing construct and long functional life. Its opacity means only thin foils can be transparent. LDPE is widely used for manufacturing various containers, dispensing bottles, wash bottles, tubing, and various molded laboratory equipment. Its most common use is in plastic bags.

MLPlastics Additive Masterbatches PE SLA3136 is a PE based additive masterbatch containing a blend of high purity long-term and short-term antistatic agent both of vegetable origin. The combination offers excellent performance due to a synergistic effect between the two antistatic agents.

MLPlastics Additive Masterbatches PE LTA1205 is a additive masterbatch containing a high purity long-term antistatic agent of vegetable origin in PE carrier resin. It migrates slowly to the surface at a controlled rate to maintain long-lasting conductivity.

Optical brightener OB also fluorescent brightener OB, optical brighteners for plastics. Optical brightener OB mainly brighten or whitening PVC, PE, PP, PS, ABS, PMMA, POM. It is one important whitening agent in plastics.

Nevimid 66 A G50 NATURALE is a Polyamide 66 reinforced with 50% glass fiber. its used in Automotive & Agricolture Consumer Goods

SUNOX® 592 is a synergistic blend of high performance phosphite antioxidant and radicals capture agent. This product has excellent synergistic effect, so it can provide efficient processing protection at high temperature.

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 1220 x 2440 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Optical brightener KSN, also called optical whitening agent KSN. Optical whitening agent is mainly used on polyester, nylon fiber.PET, PBT, PC, ABS, PA.

AMPLUS PC12 1020 BK is a polycarbonate general purpose black.

UV MB 01(SV 91A001UVA) U.V 770 is used for Specifically, LDPE Lamination on PP Raffia and it having advantage of Excellent light stabilizer at low cost.

MLPlastics Additive Masterbatches PE PEA6005 is a polymer based additive masterbatch containing effective substance in PE carrier resin. Acts as an antistatic agent. Offers permanent static dissipation performance. It forms a conductive polymer matrix in the host polymer. With proper processing procedures, products with permanent moisture independent static dissipation levels of 10E9 to 10E12 Ohms.sq. surface resistivity are obtainable. Compatible with polyolefins.

Mermas Kimya Eco UV 15 is an additive used to make Packaging Products, Raffia and Greenhouse Nylon.

Nevimid 66 A G30 NERO is a Polyamide 66 reinforced with 30% glass fiber, black color. its used in Automotive & Agricolture Consumer Goods

Exolon® multi UV 5X/16-25 is a 5-wall polycarbonate sheet of 16 mm thickness, with an X-structure for enhanced stiffness. It combines high light transmission, good load bearing properties, good thermal insulation and excellent weather resistance. The sheet is lightweight, impact resistant and easy to install. The sheets are produced with a coextruded UV-protective layer, which is homogeneously fused with the sheet material.This UV-protected side must be installed facing upwards/outwards. It provides Exolon® multi UV with a highly effective protection against weathering, guaranteed for 10 years.

MLPlastics Additive Masterbatches PE EPH500 is a fluoropolymer based additive masterbatch containing 5% of the effective substance in PE carrier resin. Acts as a processing aid. It reduces the melt fracture (sharkskin), die-build-up and power consumption. Increases throughput. The masterbatch forms a thin coating on the metal surfaces that acts as a lubricant and reduces the friction between the metal and the polymer. Compatible with polyolefin.

AirOFilm® Agri improves shelf life and ensures that this type of load arrives in perfect condition.

DHR-966 Titanium dioxide rutile /tio2 rutile is a fine, dry powder, which are inorganic coated with Al2O3&SiO2 and special organic surface treated to have both good optical properties and excellent pigment properties.

SUNOX® DLTP is a dialkyl ester of thiodipro- pionicacid antioxidant. Used as a heat stabilizer in combination with a phenolic antioxidant for polymer. Offer very good color, processing and aging stability.

Neviprop 038 FV25 NATURALE is a Polypropylene filled with 25% glass fiber. its used in Automotive & Agricolture Consumer Goods

Sunlight together with heat and oxygen induces reactions of degradation in plastics, causing detrimental effects on their mechanical, optical and physical properties. The result is breakage, chalking and discoloration. Outdoor weathering results in degradation by exposure to the ultraviolet part of sunlight which reaches the earth’s surface, at wavelengths between 300 and 400 nanometres. Environmental factors like temperature, humidity, oxygen, polluting gasses also play an important role.

Mermas Kimya Eco UV 10 is an additive used to make Packaging Products, Raffia and Greenhouse Nylon.

Hubei Hongxin Chemical OB-1 For PE Film is an excellent thermal stability and weather resistance and good compatibility with additives in plastics.

Nevimid 6 B G10 NERO is a industrial grade. Its used in Automotive & Agricolture Consumer Goods.

Nevimid 66 A B30 NATURALE is a Polyamide 66 reinforced with 30% glass beads. its used in Automotive & Agricolture Consumer Goods

Exolon® multi UV 2/16-30 is a twinwall polycarbonate sheet with a thickness of 16 mm. It combines a high level of light transmission with thermal insulation and excellent weather resistance. The sheet is lightweight, impact-resistant and easy to install. The sheets are produced with a coextruded UV-protective layer on both sides, which is homogeneously fused with the sheet material. It provides Exolon® multi UV 2/16-30 with a highly effective protection against weathering, guaranteed for 20 years.

UV MB 06(SV 91A006 UVA) is used for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP in fibers and film and for Food grade applications and it having advantage of Better cost performance ratio

HIPTEN® 22003 is used in Heavy duty bags, Agricultural films, Shrink film.

PE12309 is a White PE masterbatch with ultra-high opacity performance for film application, It contains premium Rutile TiO2 & PE as carrier.

PoAbdullah Al Barrak Plastic Products Polycarbonate Textured Sheet 2050 x 3000 has a texture or pattern which is embossed on its surfaces. By the texture diffuses the natural light, which streams in and ensures uniform dispersion of light over a large scale area that can prevent glare. It is more used mainly in the partition with beautiful decoration effects. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.