Products in Cooling & Climate: Bearings

Plain bearing material based on PPS, PPS + carbon fiber + graphite

Pentamid A GV15 MK15 H black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber and 15% mineral filled.

Pentamid A GV25 H RC black is a normal viscosity, heat stabilized polyamide 66, 25% glass fiber reinforced, recompound.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

Exac PTFE (EXTRUDED) is a Polytetrafluoroethylene (PTFE) product. It is available in North America. Applications of Exac PTFE (EXTRUDED) include aerospace, engineering/industrial parts, electrical/electronic applications, military applications and automotive.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Pentamid B GV35 H black is a normal viscosity, heat stabilized polyamide 6, 35% glass fiber reinforced.

Pentamid A GV25 H green 6011/1 is a normal viscosity, heat stabilized polyamide 66, 25% glass fiber reinforced, special pigmentation.

POM copolymer unreinforced, medium viscosity, tribologically modified, optimized sliding and wear behavior

POM-MD30, POM copolymer, medium viscosity, 30% mineral-reinforced

POM-MD30, POM copolymer unreinforced, medium viscosity, 30% mineral-reinforced

Exac FEP is a Perfluoroethylene Propylene Copolymer (FEP) product. It is available in North America. Applications of Exac FEP include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Copolymer Heat Resistant Weather Resistant

Pentamid B GV30 H black is a normal viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced.

Pentamid AB GV15 H natural is a normal viscosity, heat stabilized polyamide 66+6, 15% glass fiber reinforced.

AFT Fluorotec AF201 Carbon Filled PTFE is the addition of carbon to PTFE increases the compressive strength and wear resistance. It provides good thermal conductivity and low permeability. Commonly used in sealing applications.

Pentamid A GV30 H LS natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Pentamid A GV30 H red 3000/2 is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, special coloration.

Guarniflon G439/GLASS + PIGMENT is a wide range of PTFE grades - virgin and compounded - certified and approved according to international standards for food and drinking applications. A wide range of virgin and filled PTFE grades certified and approved according to international standards for applications in the food and drinking water sectors.

Pentamid B S GV50 H natural is a low viscosity, heat stabilized polyamide 6, 50% glass fiber reinforced.

Pentamid B GV15 H RC black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced, recompound.

Pentamid A GV25 H UV natural is a normal viscosity, high heat stabilized polyamide 66, 25% glass fiber reinforced.

Pentamid A GV30 H MOS non-colored is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, modified with mos2.

Pentamid B S GV15 H natural is a low viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced.

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Pentamid A GV35 H natural is a normal viscosity, heat stabilized polyamide 66, 35% glass fiber reinforced.

POM-I, POM copolymer unreinforced, medium viscosity, impact modified, reduced emissions for automotive interior applications

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Grupa Azoty S.A Tarnoform® 300 SI is an Acetal (POM) Copolymer material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnoform® 300 SI are: Flame Rated Chemical Resistant Bacteria Resistant Copolymer Fatigue Resistant Typical applications include: Engineering/Industrial Parts Automotive Plumbing/Piping/Potable Water

Exac PVDF is a Polyvinylidene Fluoride (PVDF) product. It is available in North America. Applications of Exac PVDF include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

AFT Fluorotec AF213 Anti-Static PTFE is a special conductive carbon filler.

Pentamid B GV35 H RC black is a normal viscosity, heat stabilized polyamide 6, 35% glass fiber reinforced.

Pentamid B GV30 H UV natural is a normal viscosity, heat and uv stabilized polyamide 6, 30% glass fiber reinforced.

Pentamid B GV15 GK15 H black is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 15% glass bead reinforced.

Pentamid AB S GV50 H black is a low viscosity, heat stabilized polyamide 66+6, 50% glass fiber reinforced.

Pentamid L GV15 H black is a normal viscosity, 15% glass fiber reinforced polyamide 12, heat stabilized.

Pentamid B S GV40 H natural is a low viscosity, heat stabilized polyamide 6, 40% glass fiber reinforced.