Products in Electrical & Electronic Systems: Tubing

Arnitel® CM622, a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high-temperature resistance, strength, and outstanding processing attributes. In industries spanning automotive to E&E, it serves as a lighter, more intelligent, and eco-friendly replacement for traditional rubbers, effectively lowering environmental impact and system costs. Processed through extrusion and injection molding techniques, it features a hardness of 60 Shore D, primarily ideal for extrusion applications.

Arnitel® UM551 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM551 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. However, it's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM551 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

Akulon® F136-DH is a polyamide 6 (PA 6) that functions as a resin with distinctive features, including being lightweight, nucleated, and UL flame-rated. It is applied in various industries and markets, including automotive and transportation, electrical and electronics, and industrial sectors.

Stanyl® TW363 is a high-performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear and friction, and process flow qualities are required. This high-performance polyamide 46 is used for applications in automotive, E&E, gears, and outdoor power equipment. Since it retains its mechanical properties at high temperatures up to 220 °C, this makes it ideal for extremely high-performance applications, where it outperforms PPA, PA6T, PA9T, and often PPS and LCP. Suitable processing technologies for the product are extrusion and injection molding. Special features include heat stabilization.

Arnitel® UM552 is a high-performance thermoplastic copolyester (TPC) renowned for its exceptional blend of flexibility, high temperature resistance, and strength, complemented by excellent processing characteristics. In industries ranging from automotive to E&E, Arnitel® UM552 is gaining prominence as a more sustainable and efficient alternative to traditional rubbers, leading to reduced environmental impact and lower system costs. It's important to note that due to its limited hydrolysis resistance, this material is suitable for use only in dry environments. Arnitel® UM552 can be processed using both extrusion and injection molding technologies, offering versatility for various applications.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

NYCO6 512 HS is a medium viscosity injection molding and extrusion grade Nylon 6 Resin. It is nucleated for controlled crystallinity, and heat stabilized for a higher continuous use temperature.

PermaFelx® 45 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Silopren™ LSR 2670 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

PermaFelx® 50 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

PermaFelx® 75 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Silopren™ LSR 2665 by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used as Molding Resin for a variety of applications in Aerospace, Automotive and Aviation. It is available in Liquid form.

Grupa Azoty S.A Tarnamid® T-27 GF30 V2 is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 GF30 V2 are: Flame Rated Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

PermaFelx® 55 is a family of thermoplastic elastomers designed in a range of durometers for maximum versatility. Performance-tested, PermaFlex delivers superior results compared to rubber, TPEs and other elastomers. As opposed to cured rubber, PermaFlex can be re-ground and re-molded many times. It processes with less waste and no sulfur pollution.

Silopren™ LSR 2680 FC by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used It is available in Liquid form.

Grupa Azoty S.A Tarnamid® T-27 MK30 is a Polyamide 6 (Nylon 6) material filled with 30% mineral. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Tarnamid® T-27 MK30 are: Chemical Resistant Fatigue Resistant Flame Retardant Food Contact Acceptable Good Esthetics Typical applications include: Automotive Engineering/Industrial Parts Construction Applications Electrical/Electronic Applications Fabrics/Fibers

Tarnamid® T-27 GF30 V0 is a polyamide 6 containing 30% glass reinforced, heat stabilized, flame retardant.

Sylvin™ 9676-95UV Clear Gray 9634 is a vinyl compound formulated for UV stabilized battery test covers.