Products in Automotive: Foaming Agent

Foamazol™ 85 is recommended for applications in polystyrene that require high gas pressure.

Poly Chem Alloy PolyFoam 2004CFP are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Foamazol™ 86 is intended for extrusion and molding applications where lower processing temperatures are used.

Ficel® HC ES 4050 is used as Flexible PVC, Rigid PVC, Styrenics, Polyolefin.

BTec™ BSI-7070-FP is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.

Fascom™ CS Define is a highly activated ADC for inhibition PVC plastisols.

Foamazol™ 70 is recommended for applications where very fine celled foams are required.

BTec™ BSI-9170-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Fascom™ CS Ultra is a very highly activated ADC for PVC processing (Liquid Dispersion Only).

BTec™ BSI-9100-AL is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Otsuka Chemical Unifoam AZ ultra #1195-I have been developed with powder technology and surface treatment technology to avoid caking and dust pollution. UNIFOAM AZ is the most widely used foaming agent for plastics and rubbers. We have recently developed UNIFOAM AZ ULTRA. This new foaming agent has perfect anti-caking qualities, is free flowing, and has a low percentage of dust.

Foamazol™ 94 is recommended for applications where good dispersion is important and a small amount of foam is necessary.

Foamazol™ 90 is recommended for low temperature applications where high gas yields are desirable.

Foamazol™ 40 is recommended for applications where a relatively fine cell structure is required at processing temperature around 175-230° C (347-446° F).

Foamazol™ 73S is For use in injection molding and extrusion applications where very fine and uniform cells are required. Especially recommended for nucleation of direct gassed polystyrene foams.

Fascom™ CW Range is a combined Exo/Endothermic system for PVCu profiles.

BTec™ BSI-9170-VFP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

BTec™ BSI-9135-FP is an endothermic CFA’s chemicals that take heat out and typically produce much smaller cell structure creating improved processing, better physical properties and improved appearance.

Foamazol™ 92 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

Foamazol™ 73 is for use in injection molding and extrusion applications where very fine and uniform cells are required. Especially recommended for nucleation of direct gassed polystyrene foams.

Poly Chem Alloy PolyFoam 504CFW are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

Fascom™ CS Plus is a highly activated ADC for PVCu and rubber processing.

Foamazol™ 72 is intended for applications that require a very fine and uniform cell structure for with relatively smooth skins.

Hangzhou Hi-Tech Fine Chemical AC7000 plastic products are widely used in demanding, such as high-density EVA the PE shoe material, NBR + PVC insulation materials, auto parts, etc. is especially suitable for the size of the mold pressing EVA foam and the free mode of rubber and plastic foam; commonly usedin EVA MD granulation injection, PE molded foam of PVC molding, extrusion coating, and rubber and plastic molded foam and rubber extrusion, molding foam.

Hangzhou Hi-Tech Fine Chemical RA is a high-temperature white foaming agent for polypropylene, rigid PVC, ABS, nylon, high density polyethylene, polycarbonate and other high-temperature foam products. P-toluenesulfonyl semicarbazide inorganic endothermic foaming agents in different ways and proportions compound can be produced Decomposition temperature range of absorption heat balance white foaming agent to adapt to a variety of soft, hard plastic and rubber and foam performance.

Fascom™ RP Range is a modified and activated ADC for reduced plate-out.

Ficel® LE is used as Flexible PVC/Plastisol.

Hangzhou Hi-Tech Fine Chemical HH130 blowing agent is artificial leather processing characteristics by careful modification of the AC blowing agent from leatherette special foaming agent for PVC artificial leather, foam. It can also be used for the production of soft PVC non-slip pad andsemi-PU leather foam soft PVC products for the production of the foaming agent has a good cell structure and good whiteness.

BTec™ BSI-7100-VFP is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.

BTec™ BSI-8150-FL is an exothermic CFA’s generate heat during the decomposition process, yield more volume of gas and higher gas pressure.

Poly Chem Alloy PolyFoam 4004K are additive masterbatch concentrates containing highly specialized chemical blowing agents. This product was specifically created for the production of microcellular foam structures in a variety of thermoplastic materials. PolyFoam products are available containing endothermic blowing agents, exothermic blowing agents, and as a combination of both.

BTec™ BSI-7100-VFL is an endothermic and exothermic CFA Blends deliver a collaboration effect that provides attributes that each cannot supply by independently- the best of both chemistries.

Foamazol™ 91 is intended for applications where lower processing temperatures are used that require uniform cell structure with good density reduction.

Foamazol™ 88 is recommended for applications requiring a high gas yield.

Ficel® HC 01 is used as Flexible PVC.

Ficel® HC ES 3050 is used as Flexible PVC, Rigid PVC, Polyolefin.