Products in Automotive: Polyamide 66 (PA 66)

Polyamide 66 (PA66) based compound. High fluidity. Glass fibres. Flame retardant, non classifiable, with brominated flame retardants, PBB/PBDE free.

Badamid® A70 MoS2 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

High Impact Nylon Resin (PA66)

Using fibers from textile production as raw materials it is possible to produce a range of products considered eco-sustainable and of excellent quality. The bases of textile origin are considered pure, have excellent technical properties, a low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. Responding to the various needs in the reference sectors, Remid 66 does not in any way compromise the quality of the final products.

Nevimid 66 A G14 ST NATURALE is a Polyamide 66 reinforced with 14% glass fiber, toughened. its used in Automotive & Agricolture Consumer Goods

Pentamid A GV20 GK10 H natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber and bead reinforced, special coloration.

Pentamid A GV35 HYD 1.1 black is a normal viscosity, heat and highly hydrolysis stabilized polyamide 66, 35% glass fiber reinforced.

TECACOMP PA66 TC gray 4057 is a Polyamide 66 (PA 66) polymer.

Using fibers from textile production as raw materials it is possible to produce a range of products considered eco-sustainable and of excellent quality. The bases of textile origin are considered pure, have excellent technical properties, a low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. Responding to the various needs in the reference sectors, Remid 66 does not in any way compromise the quality of the final products.

Polifil® NYLON 6/6 combines good abrasion and chemical resistance. These properties have been proven to work in the following applications: valves, bearings and bearing cases. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Amilan® CM3001-N is a Polyamide 66 (Nylon 66) product. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.

NIRETAN A F20 AE/V2 is regionally available in Europe.

BARLOG plastics GmbH Kebablend® / EC FE 170603/4 (DB) is a dry blend material based on PA 6.6 with excellent electrical conductivity. The material was developed specially for applications in the field of electrical engineering and is very well suited for shielding electromagnetic fields. There is great application potential in the substitution of metal housings (metal replacement / lightweight construction) with regard to the EMC-compliant component design. As a housing material, Kebablend® / EC FE 170603/4 offers the advantage of electromagnetic shielding even in the high-frequency range, without additional surface treatments.

Pentamid A GV30 H LS natural is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced.

Nilit NILAMID® A3 GF50 is a Polyamide 66 (Nylon 66) compound, 50% glass fiber reinforced, heat stabilized, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF50 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Pentamid A GK30 H LS black is a normal viscosity, heat stabilized polyamide 66, 30% glass bead reinforced, laser markable.

Pentamid A GV15 E H RC black is a normal viscosity, heat stabilized polyamide 66, 15% glass fiber reinforced, impcat modified, recompound.

NIRETAN A F30 is regionally available in Europe.

Toray Amilan® CM3001G-30 is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It is available in Asia Pacific, Europe, or North America. Typical application includes automotive. Primary characteristic includes flame rated.

CompaMid® PA66 GF 10 M20 GF- & Mineral, Crosslinkable PA66 Compounds

PA66 GF 50% reinforced

Badamid® A80 by Bada AG is comprised of Polyamide 66. It is commonly used It is available in Granules form.

CP-Polymer Technik Wellamid® 6600/50 GV 15 HWCP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Toray Amilan® CM3001G-45 is a Polyamide 66 (Nylon 66) product filled with 45% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristics are flame rated.

Sollamid A 2700 GR 10 characterizes the PA 66 Modified with Graphite, intended for Injection Molding.

Pentamid A GV35 HYD black is a normal viscosity, heat and hydrolysis stabilized polyamide 66, 35% glass fiber reinforced.

Nanjing Hongrui Plastic Products A305 is used in bearing retainer, mechanical parts, auto parts, electronic components. It is glass fiber reinforced type.

Self-lubricating product based on Polyamide 66 (PA66). PTFE.

Pentamid A GV30 H1 RC black is a normal viscosity, high heat stabilized polyamide 66, 30% glass fiber reinforced, recompound.

Nilit NILAMID® A3 GF30 TF20 is a Polyamide 66 (Nylon 66) compound, 30% glass fiber reinforced, low wear and friction with 20% PTFE, UL listed HB.This compound is intended for injection molding.NILAMID® A3 GF30 TF20 is primarily designed for the Industrial and Consumer industry. It is also suitable for Electrical and Electronic or Automotive applications.

Wellamid® 6600 GS 30 HWCP by CP-Polymer Technik is comprised of Polyamide 66 and Thermoplastic (unspecified). It is commonly used

Impact-modified, heat-stabilized, nylon 6/6 molding resin with high impact strength possessing excellent wear properties

Kolon Industries Kopa® KN333G30HS is a Polyamide 66 (Nylon 66) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, Latin America, or North America. Characteristics includes flame rated RoHS compliant, good dimensional stability, heat resistant and high strength.

Nilit NILAMID® A3 GB30 is a Polyamide 66 (Nylon 66) compound, 30% glass bead reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 GB30 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.