Products in Interior: Hoses

434 Products found in Interior

UNISOFT TPE™ ST-30A-CL-1-01 banner

United Soft PlasticsUNISOFT TPE™ ST-30A-CL-1-01

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion

UNISOFT TPE™ ST-30A-CL-1-01 is a TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer.

SEBS - ELASTRON G501.A60.N.PS banner

ElastronSEBS - ELASTRON G501.A60.N.PS

Tear Strength:30.0 - 30.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):78.0 - 78.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PS.

SEBS - ELASTRON G400.A50.B banner

ElastronSEBS - ELASTRON G400.A50.B

Tear Strength:27.0 - 27.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):39.0 - 39.0 %

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

INNOPRENE 1350 banner

Kumho PolychemINNOPRENE 1350

Applications:Equipment & Parts, Glazing & Window Elements, Data Communication Cables
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Polymer Name:Thermoplastic Vulcanizate (TPV)
End Uses:Cup Holders, Speciality Cables, Protective Coverings

INNOPRENE 1350 is a product that is already completely cross-linked and there is no need for an extra cross-link process before its ultimate use. Also, it is possible to simplify the processes and reduce the prime cost as it is an environment-friendly material allowing for an easy recycle of scraps resulted from processing.

TPV - ELASTRON V201.D40.B banner

ElastronTPV - ELASTRON V201.D40.B

Density:950.0 - 950.0 kg/m³
Tear Strength:94.0 - 94.0 kN/m
Compression Set (70 °C):57.0 - 57.0 %

A hard, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

Denka Company CHLOROPRENE DCR-107 banner

Denka CompanyDenka Company CHLOROPRENE DCR-107

Polymer Name:Chloroprene Rubber (CR)
End Uses:Coated Fabrics, General Purpose, Belts & Belt Repair, Automotive Exterior Parts, Hoses, Automotive Interior Parts, Gloves
Features:Ozone Resistant, Good Adhesion, Flame Resistant, Oil Resistant, Heat Resistance, Enhanced Physical Properties, Good Processability

CHLOROPRENE DCR-107 is applied in Belts, air springs / Low exothermic polymer.

TPV - ELASTRON V101.A55.N banner

ElastronTPV - ELASTRON V101.A55.N

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):32.0 - 32.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

SEBS - ELASTRON G101.A65.N banner

ElastronSEBS - ELASTRON G101.A65.N

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:750.0 - 750.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G400.A65.N banner

ElastronSEBS - ELASTRON G400.A65.N

Tear Strength:41.0 - 41.0 kN/m
Strain at Break:950.0 - 950.0 %
Compression Set (70 °C):44.0 - 44.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

Paychlor K-62 banner

Payal GroupPaychlor K-62

Chemical Family:Alkanes, Mineral Oils
Functions:Plasticizer
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Synthetic Leather, Automotive Applications, Flooring, Automotive Exterior Parts, Footwear, Medical/Healthcare Applications, Cables, Wires, Hoses, Pipes, Conveyors, Automotive Interior Parts

Paychlor K-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SEBS - ELASTRON G200.A70.B banner

ElastronSEBS - ELASTRON G200.A70.B

Tear Strength:40.0 - 40.0 kN/m
Strain at Break:600.0 - 600.0 %
Compression Set (70 °C):38.0 - 38.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers high temperature resistance and excellent compression set with superior UV resistance.

TPV - ELASTRON V100.A55.B banner

ElastronTPV - ELASTRON V100.A55.B

Density:970.0 - 970.0 kg/m³
Tear Strength:22.0 - 22.0 kN/m
Compression Set (70 °C):33.0 - 33.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family designed for injection applications.

UNISOFT TPE™ ST-45A-CL-1-01 banner

United Soft PlasticsUNISOFT TPE™ ST-45A-CL-1-01

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion

UNISOFT TPE™ ST-45A-CL-1-01 is a TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer.

TPV - ELASTRON V103.A60.N banner

ElastronTPV - ELASTRON V103.A60.N

Density:970.0 - 970.0 kg/m³
Tear Strength:21.0 - 21.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

TPO - ELASTRON T100.D43.N banner

ElastronTPO - ELASTRON T100.D43.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:500.0 - 500.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPV - ELASTRON V201.A83.B banner

ElastronTPV - ELASTRON V201.A83.B

Density:970.0 - 970.0 kg/m³
Tear Strength:36.0 - 36.0 kN/m
Compression Set (70 °C):42.0 - 42.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

TPO - ELASTRON T100.D60.N banner

ElastronTPO - ELASTRON T100.D60.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:980.0 - 980.0 kg/m³
Strain at Break:250.0 - 250.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPO - ELASTRON T401.D32.N banner

ElastronTPO - ELASTRON T401.D32.N

Polymer Name:Thermoplastic Polyolefin (TPO)
Processing Methods:Injection Molding
Features:High Hardness, Good Colorability
Density:910.0 - 910.0 kg/m³
Strain at Break:400.0 - 400.0 %

A hard, colorable thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.

TPV - ELASTRON V201.A75.N banner

ElastronTPV - ELASTRON V201.A75.N

Density:970.0 - 970.0 kg/m³
Tear Strength:30.0 - 30.0 kN/m
Compression Set (70 °C):37.0 - 37.0 %

A soft, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

SEBS - ELASTRON G300.A40.N banner

ElastronSEBS - ELASTRON G300.A40.N

Tear Strength:19.0 - 19.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):46.0 - 46.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

SEBS - ELASTRON G400.A22.N banner

ElastronSEBS - ELASTRON G400.A22.N

Tear Strength:13.0 - 13.0 kN/m
Strain at Break:1200.0 - 1200.0 %
Compression Set (70 °C):52.0 - 52.0 %

A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

SEBS - ELASTRON G400.A30.T banner

ElastronSEBS - ELASTRON G400.A30.T

Tear Strength:13.0 - 13.0 kN/m
Strain at Break:650.0 - 650.0 %
Compression Set (70 °C):78.0 - 78.0 %

A soft, transparent SEBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

UNISOFT TPE™ ST-35A-CL-1-01 banner

United Soft PlasticsUNISOFT TPE™ ST-35A-CL-1-01

Polymer Name:Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:Injection Molding, Extrusion

UNISOFT TPE™ ST-35A-CL-1-01 is a translucent thermoplastic elastomer (TPE) grade based on styrene-ethylene/ butylene-styrene block copolymer. Possesses low density and shows adhesion to polypropylene. Is suitable for processing by injection- and extrusion molding. Is a FDA compliant grade.

RE-FLEX® 1588AJL banner

Townsend ChemicalsRE-FLEX® 1588AJL

Density:1110.0 - 1110.0 kg/m³
Strain at Break:630.0 - 630.0 %

RE-FLEX® 1588AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

TPV - ELASTRON V103.A65.B banner

ElastronTPV - ELASTRON V103.A65.B

Density:970.0 - 970.0 kg/m³
Tear Strength:28.0 - 28.0 kN/m
Compression Set (70 °C):39.0 - 39.0 %

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer family that offers good physical properties and chemical resistance.

SEBS - ELASTRON G400.A60.T banner

ElastronSEBS - ELASTRON G400.A60.T

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:550.0 - 550.0 %
Compression Set (70 °C):98.0 - 98.0 %

A soft, transparent SEBS based thermoplastic elastomer (TPE) compound designed for injection molding applications.

Neoplast™ 180 HOFR banner

ZylogelastocompNeoplast™ 180 HOFR

Applications:Healthcare Packaging, Carpet, Waterproofing & Weatherproofing
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Chemical Family:Polypropylenes (PP), Polyolefins
Polymer Name:PP/EPDM, Thermoplastic Vulcanizate Alloy (TPV Alloy)
End Uses:Pharmaceutical Stoppers, Closures, Caps

Neoplast™ 180 HOFR are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

SEBS - ELASTRON G500.A80.B.PA banner

ElastronSEBS - ELASTRON G500.A80.B.PA

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, black SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

Envir® PA6G3OHL-BK0701 banner

BarnetEnvir® PA6G3OHL-BK0701

Polymer Name:Polyamide 6 (PA 6)
Fillers Included:Glass Fiber
Flexural Modulus:9630.0 - 9630.0 MPa

Envir® PA6G3OHL-BK0701 is a 30% glass fiber reinforced nylon 6 molding resin, it is heat stabilized and hydrolysis resistant. 6G30HL is optimized for properties and processability. It is provided black in color.

Vinoplast 550 banner

RishiroopVinoplast 550

Applications:Other Wire & Cable Applications, Other Industrial Applications, Consumer Electronics
Product Families:Elastomer Blends, Thermoplastic Elastomers
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:NBR/PVC
End Uses:Printer Parts, Hoses, Footwear

Vinoplast 550 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

VinoPrene 706 banner

RishiroopVinoPrene 706

Applications:Other Wire & Cable Applications, Other Industrial Applications, Consumer Electronics
Product Families:Elastomer Blends, Thermoplastic Elastomers
Chemical Family:Vinyls, Vinylics & Vinyl Derivatives
Polymer Name:NBR/PVC
End Uses:Printer Parts, Hoses, Footwear

VinoPrene 706 are a group of nitrile rubber (NBR) / Polyvinyl Chloride (PVC) blends.

Paychlor D-45 banner

Payal GroupPaychlor D-45

Chemical Family:Alkanes, Mineral Oils
Functions:Plasticizer
Compatible Polymers & Resins:Polyvinyl Chloride (PVC)
End Uses:Synthetic Leather, Automotive Applications, Flooring, Automotive Exterior Parts, Footwear, Medical/Healthcare Applications, Cables, Wires, Hoses, Pipes, Conveyors, Automotive Interior Parts

Paychlor D-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SEBS - ELASTRON G500.A80.N.PA banner

ElastronSEBS - ELASTRON G500.A80.N.PA

Tear Strength:36.0 - 36.0 kN/m
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound specially designed for excellent adhesion to PA.

APARPRENE® TPV 060 AB M banner

Apar IndustriesAPARPRENE® TPV 060 AB M

Applications:Other Healthcare & Pharma Applications, Appliances & Electronics, Jacketing & Insulation
Product Families:Thermoplastic Vulcanizates (TPV), Thermoplastic Elastomers
Polymer Name:Thermoplastic Vulcanizate (TPV)
End Uses:Levers, Solar Panels, Automotive Bellows

APARPRENE® TPV 060 AB M permits fabrication of rubber-like articles with speed, efficiency and economy in injection molding, extrusion and blow molding to create durable and long-lasting parts. It is a specialty grade. TPV products are highly preferred in the automotive, electrical, home appliance, construction and healthcare industries.

SEBS - ELASTRON G300.A75.N banner

ElastronSEBS - ELASTRON G300.A75.N

Tear Strength:43.0 - 43.0 kN/m
Strain at Break:700.0 - 700.0 %
Compression Set (70 °C):51.0 - 51.0 %

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

RE-FLEX® 580AXL banner

Townsend ChemicalsRE-FLEX® 580AXL

Density:1100.0 - 1100.0 kg/m³
Strain at Break:620.0 - 620.0 %

RE-FLEX® 580AXL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Show

of 434 results