Products in Other Automotive Applications: Hoses

Paracril AJ is a copolymer of butadiene and acrylonitrile, hot polymerized with a non-staining stabilizer.

Tufel™ III rubber series are biocompatible(1), two component silicone rubber compounds. 92506 and 92656 are 50 and 65 durometer addition curable silicone elastomers that offer low compression set and high resilience with no post bake required for most applications. The combination of these properties may lead to longer service life in highly mechanical applications. The 92506 and 92656 elastomers can be used to produce extruded and calendered parts with excellent permanent set resistance and should be considered for applications such as peristaltic pump tubing, gaskets and seals.Key Features and Benefits Low compression set Excellent elastic memory Biocompatible(1) No post baking required for most applications Low volatile bases minimize porosity Peroxide-free cure system Broad processing window High output rates Tight surface cure Non-blooming Translucency Low hysteresis Potential Applications Healthcare Consumer Goods General Industrial.

Miracll Chemicals E 165D is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Envir® PA6N3L-BK0305 is a General Purpose Nylon 6 molding resin. 6N3L is Nucleated and Lubricated for fast molding cycle times and easy processing. It is provided Black in color.

Miracll Chemicals E 195 is a polyester-based thermoplastic polyurethane used for wide variety of applications.

Envir® PA66G33HL-BK0101 is a 33% Glass fiber reinforced Nylon 66 molding resin, it is Heat stabilized and hydrolysis resistant. 66G33HL is optimized for properties and processibility. It is provided Black in color.

APARPRENE® TPV 090 AB M permits fabrication of rubber-like articles with speed, efficiency and economy in injection molding, extrusion and blow molding to create durable and long-lasting parts. It is a specialty grade. TPV products are highly preferred in the automotive, electrical, home appliance, construction and healthcare industries.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Elafleks® DOTP (Dioctyl Terephthalate) is used as a softener in all PVC paste and pulp mixtures. Used in all calendaring systems, automotive sector, cable production, synthetic leather production, bookbinding fabric production, PVC floor cloth production, production of goods not containing phthalate (toy sector, bookbinding fabric production, production of some hoses, table cloth, etc.), PVC door mat production, tarpaulin production.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

APARPRENE® TPV 040 DB M permits fabrication of rubber-like articles with speed, efficiency and economy in injection molding, extrusion and blow molding to create durable and long-lasting parts. It is a specialty grade. TPV products are highly preferred in the automotive, electrical, home appliance, construction and healthcare industries.

Neoplast™ 135 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

PA66 impact modified

PA66 impact modified

Paracril OZO3996 is a pre-fluxed blend of NBR/PVC containing 40% PVC.

Taizhou Huangyan Donghai Chemical Vulcanizing resin DH1045 is one kind of heat reactive phenolic resin, the two side of the structure ishydroxymethyl. It is mainly used as the vulcanizing resin for Butyl rubber, Nitrile rubber, CR, NR, or EPDM, etc. It is soluble in Toluene, xylene, Ethane such Aromatic solvent and Aliphatic solvent. For it's heat resistance, high pressure, anti-age properties, the Resin DH1045 could be added into the mixing process directly. It is mainly used for the product of bladders, medical Butyl rubber product, sealing product or hosed, etc.

Paracril 33110 is a copolymer of butadiene and acrylonitrile, cold polymerized and non-staining stabilized.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

ALTAFLUOR® 100 PTFE has the broadest temperature range of any fluoropolymer and can resist highly corrosive liquids and gasses even at elevated temperatures. The smooth surface finish, lowest coefficient of friction and lubricity make it ideal for bushing or bearing applications.

Grupa Azoty S.A Tarflen® SG1 is a Polytetrafluoroethylene (PTFE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for compression molding.Important attributes of Tarflen® SG1 are: Chemical Resistant Flame Retardant Wear Resistant Weather Resistant Typical applications include: Engineering/Industrial Parts Coating Applications Hose/Tubing Plumbing/Piping/Potable Water Sealing Applications

Emulprene 1732 is a copolymer styrene-butadiene, cold emulsion polymerized used fatty acid as emulsifier, coagulated by salt – acid system and it is extended utilizing 32.5phr of naphthenic oil.

Paracril 2860 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Sylvin Technologies Sylvin™ 83053-76 Natural is a vinyl compound formulated for extruded hose applications that need to be self-extinguishable and resistant to chemical attack by methyl methacrylate.

Neoplast™ 163 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 173 M/E are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

A High Ethylene, High Mooney Polymer for TPO Products and Extruded Mechanical Goods

Neoplast™ 155 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Black Bear BBC TR30 provides comparable hardness with unique reinforcing characteristics and a PAH level below detection limits. We have also seen dramatic synergistic effects when blended with N330. For Technical Rubber Goods we manufacture two grades that prove a versatile, one-to-one replacement for a wide range of current grades; BBC TR30 and BBC TR30S.

Paracril BPLT is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

Goodyear Rubber Company of So. California Fluoroelastomers are a family comprising copolymers of hexafluoropropylene, vinylidene and terpolymers of tetrafluoroethylene. Viton is a common brand of fluoroelastomers and widely used in high temperature sealing and chemical resistant applications. Fuoroelastomers are known as FKM, categorized under ASTM designation. FKM tubing or hoses are recommended in automotive and other transportation applications. FKM O-rings are alternative to Nitrile rubber products in automobile engines with much higher temperature and chemical resistant applications.

Neoplast™ 145 FT EB are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Neoplast™ 180 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Paracril N41 is a copolymer of butadiene and acrylonitrile, cold polymerized with a semi staining stabilizer.

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.