Products in Other Bonding & Assembly Applications

PBT + PC, PBT / PC blend, unreinforced, impact resistant, reduced tendency to warp

Lenderink Technologies #59W Dry Film Adhesive consist of bonds such as foam, fabric, wood, fiberglass, filters and more. It can be reapplied and reactivated at low pressure.

Nylene Medium-impact modified nylon for fast, easy molding Parts molded from 721 have good impact strength right out of the mold without post conditioning Suitable for applications such as clips, fasteners, and other parts where some initial flexibility and impact resistance is desired Cylinder temperatures should be in the 450°F-500°F range.

Nylene General purpose injection molding resin. Lubricated and nucleated for faster cycle times Suitable for applications such as clips & fasteners, bushings & rollers, and other general purpose uses

CP-Polymer Technik Wellamid® GFT15N050-N2 is a Polyamide 66 (Nylon 66) material filled with 15% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® GFT15N050-N2 are: Flame Rated Impact Modified Typical application of Wellamid® GFT15N050-N2: Automotive

Kocetal EL306 is impact strength modified grade suitable for fasteners and switches.

Silicone Solutions SS-1801 is a fast curing silicone RTV adhesive rubber developed for radiator sealing applications that require fast development of physical properties and excellent adhesion. SS- 1801 is a 2-part, 1:1 mix ratio silicone that when mixed and applied to the substrate allows handling of the coated radiator assembly within minutes. When cured, the elastomer resists weathering, ozone, moisture, UV and high temperatures. SS-1801 works well in static mix dispensing equipment.

CP-Polymer Technik Wellamid® 22LHI4 XE-N is a Polyamide 66 (Nylon 66) material. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding.Important attributes of Wellamid® 22LHI4 XE-N are: Impact Modified Impact Resistant Typical application of Wellamid® 22LHI4 XE-N: Automotive

Nylene Recommended for molding applications requiring both maximum durability and toughness Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts Chemically resists oil and grease Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle

Nippon Carbide Industries Nissetsu is acrylic polymer solution resin. It is used for adhesives and cross-linking　agents, will widely answer customer’s purpose and needs.

PBT-GF30 FR, PBT, 30% glass fiber reinforced, flame retardant

Nylene Low wear 30% glass fiber reinforced nylon 6/6 Provides a low friction and low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced - Suitable for applications such as bushings and bearings, wear plates, caterpillar tracks, and other parts where wear may be an issue

Kolon Industries Kocetal® UR303 is an Acetal (POM) Copolymer product. It is available in Asia Pacific, Europe, Latin America, or North America. Applications of Kocetal® UR303 include automotive, electrical/electronic applications and engineering/industrial parts. Characteristics includes flame rated and impact modified.

Nylene Heat stabilized version general purpose, fast cycling molding resin Crystallization initiators provide fast molding cycles through rapid melt set-up In addition to protection from heat degradation, parts molded from NYLENE 204 HS have better dimensional stability at moisture equilibrium than parts molded from conventional nylon Suitable for molding clip and fasteners, bushings, spacers, and other general purpose applications

BARLOG plastics GmbH Kebaform® / C 130 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Due to its property profile, Kebaform® / C 130 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow any compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

BARLOG plastics GmbH Kebaform® / C 25 H is a new type of POM that was developed specially for sliding and wear applications. Compared to a standard POM copolymer, the material is characterized by a higher crystalline structure and thus better wear properties and a higher melting temperature. Kebaform® / C 25 H improves the sliding and wear behavior solely by modifying the polymer chain and there is no reduction in mechanical properties due to the addition of tribologically active additives. Due to its property profile, Kebaform® / C 25 H is particularly well suited for applications that require good sliding and wear behavior, but do not allow compromises in mechanical properties, e.g. For gears, rollers, plain bearings, guide bushes, etc.

Kolon Industries Kocetal® UR304BK is an Acetal (POM) Copolymer product. It is available in Asia Pacific, Europe, Latin America, or North America. Applications of Kocetal® UR304BK include electrical/electronic applications and engineering/industrial parts. Characteristics includes flame rated, RoHS compliant and impact modified.

Glue Machinery Corporation GIA1094 is a light colored hot melt adhesive formulated to bond to a variety of substrates. Exhibits low odor and excellent heat stability with long open time.

Kocetal UR304 is impact strength modified grade suitable for fasteners and switches.

Engineering Grade Nylon Resin (PA66)

SCIGRIP® SG5000 Adhesive has been proven effective when used instead of glass patching in the repair of cracks and dings in fiberglass molds. It has also been shown to provide more durable repairs when compared to other, traditional patching and repair methods.

Nylene Nylene 5130 PT15 is a low wear 30% glass fiber reinforced nylon 6/6 using Nylene 5130 PT15 provides a low friction and very low wear surface while maintaining the high strength and stiffness required from a glass fiber reinforced material. 5130 PT15 is suitable for applications such as bushings and bearings, wear plates, and other parts where high strength with maximum wear resistance is required.

Kocetal EL304 is impact strength modified grade suitable for fasteners and switches.

PARABOND BG-355 is a high quality, high solids adhesive that is designed for easy application, quick penetration, and quick set time. It is used in box manufacturing, display manufacturing, paper and fabric lamination, and many other applications.

CP-Polymer Technik Wellamid® GFT13-66 XE-N is a Polyamide 66 (Nylon 66) material filled with 13% glass fiber. It is available in Asia Pacific, Europe, Latin America, or North America for injection molding. Primary attribute of Wellamid® GFT13-66 XE-N: Impact Modified.Typical application of Wellamid® GFT13-66 XE-N: Automotive

PBT + PCT, unreinforced, increased heat resistance, impact modified

(PBT + ABS) -GF30, PBT / ABS blend, 30% glass fiber reinforced, reduced tendency to warp

PBT-GF15, PBT, 15% glass fiber reinforced

BARLOG plastics GmbH Kebaform® / C 904 UR is a normal viscous, elastomer-containing injection molding grade based on Kebaform® / C 90.0. The increased elastomer content results in a very high level of toughness. The absorption capacity for high dynamic loads is excellent. Fields of application are e.g. The outsert technology, rollers, belt buckles, transport chains, fastening elements, etc.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

Lenderink Technologies #300 Dry Film Adhesive is an excellent for fabric and it can be reapplied and reactivated at low pressure.

Lenderink Technologies #200 Dry Film Adhesive is used for H.P.L. Plastic, wood, fabric, foam, moisture barrier. It can be reapplied and reactivated at low pressure.

PARABOND BG-782 is a high quality, high solids adhesive that is designed for easy application, quick penetration, and quick set time. It is used in box manufacturing, display manufacturing, paper and fabric lamination, and many other applications. PARABOND BG-782 is a high quality, high solids adhesive that is designed for easy application, quick penetration, and quick set time. It is used in box manufacturing, display manufacturing, paper and fabric lamination, and many other applications.

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

PBT-GF20 FR, PBT, 20% glass fiber reinforced, flame retardant, hydrolysis stabilized

Grade with increased impact strength ISO 9988-1: POM-K, M-GNPR, 03-001