Products in Plasters & Renders

Prismagum-G Red J636 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Prismagum-G Blue J678 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

C - EAGLE (PA 15/50) is pure acrylic for sheen paints, cementious coatings, decorative plasters,exterior and interior paints at wide PVC rate and top coatings. APEO free.High gloss paints,excellent color compatabilityin deep shade colors.

Prismagum-G Green A680 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Hemp Sliver Natural Taupe is known as hemp sliver or roving, and is used for spinning fibers, plastics, plasters, paper making, bio-plastics and much more.

Defoamer for water-based coating systems, free of silicone. SCHWEGO foam 6325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Defoamer for water-based coating systems, VOC- and silicone free. SCHWEGO foam 8325 can be used in emulsion paints, water-based coatings, silicate paints, adhesives and plasters.

Micronized Products Mica 40# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Delta Polymers Delta™ N66R-4G30 is a Polyamide 66 (Nylon 66) product filled with 15% glass fiber. It is available in North America. Primary characteristic includes impact resistant.

CoatMasters® 2007R is an advanced low VOC formulation designed for use as a breathable “reactive” penetrating sealer, primarily used to prevent and reduce chloride absorption and acts as a chloride screen. An effective water repellant for treating various types of masonry surfaces and reduction of efflorescence. This waterbased sealer is made up of advanced oligomeric alkyl-alkoxysilane based emulsion mixtures suitable for use on various grades of alkaline mineral substrates, ideal for treating porous building materials (i.e. horizontal and vertical) on various surfaces of newly constructed, rehabilitated, or restored conditions CM2007R is approved for use by DOT’s for treating reinforced concrete bridge structures, post-tension design concrete within and nearby ocean where carrying air-salt moisture is expected. The treatment of coating on high elevation is highly recommended and can be coated and painted over by other waterbased architectural finishes. For assistance on planned post coating or painting application, please contact our Technical Service Support team. CM 2007R provides long lasting protection against other anion and cation salts, and resistance to staining and/or color deterioration. The product will naturally protect color, and continuously provide a breathable porous substrate. The product can be applied on precast concrete, clay roof tiles, exterior plaster, calcium silicate brick, light concrete, natural stone, clay brick, and terracotta. Additional benefits include excellent water repellency, minimized spalling, and low odor, enabling ease of application by brush, roll, flow, and/or spray.

DNL 285 is a water-reducing admixture. DNL 285 has various uses for all types of mixers because of its rapid integrating characteristics and the ability to be used in the water supply system. Common uses for DNL 285 include mortar, countertops, and adhesive coatings. Because DNL 285 is colorless, there is no change in the color of the mix or the color of the final product. DNL 285 decreases water/ cement ratios while increasing the quality of cement and/or plaster, improving slump loss, splashing, shrinkage, segregation and stabilizing the volume.

KRONOS® 2056 is a versatile pigment with a warm tone recommended for conventional air-drying paints, silicate paints, plasters, silicone resin paints and impregnating baths for paper laminates. It confers good exterior durability.

Kel-Crete Premium Liquid Admixture is a non-toxic admixture that provides water reducing, plasticizing, air entraining and gelling functions for the plaster, stucco, shotcrete, masonry, concrete etcetera mortar industries. Except for shotcrete and concrete, the Kel-Crete is normally induced at the job site. It is a replacement to hydrated lime and silica fume. Kel-Crete meets EPA Leeds and Carbon Footprinting standards. For more than 50 years Kel-Crete Premium Liquid Admixture has been a leader in the plaster, masonry, shotcrete, concrete, etc, admixture industries. Independent laboratory test reports Kel-Crete Premium Liquid Admixture meets 2012 IBC codes and ASTM C-926.

EFA Chemie Defoamer 1800 is a product based on renewable raw materials. The product is excellent for matt, satin, water-based paints, water-based decorative paints, synthetic latex, organo-silicate based plasters and water-based adhesives. Defoamer 1800 retains its antifoam properties even after the finished paint has been stored for a long time. Defoamer 1800 is a mixture of hydrophobic components and natural oils.

PERMACAST® MS-10,000 WITH CONMICSHIELD is fortified with an anti-bacterial additive with a revolutionary product that prevents the bacteria thiobacillus from colonizing into concentrations that produce sulfuric acid.

Madol Madol 15 is a pure white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

Circosil® Coarse Grain is characterized by its special mineral composition from the Tobermorit group and the associated properties. In addition to high whiteness and defined porosity, the functional surface and chemical composition should be mentioned as characteristics. CIRCOSIL ® is a synthetically produced mineral that is produced hydrothermally from selected, high-quality raw materials. Modern process management and efficient quality monitoring guarantee the special properties of CIRCOSIL ® for our customers.

Akryvil® WSA 4612 is a Styrene-acrylic dispersion used for Decorative, Primer Interior and Exterior paints. It has dispersions of acrylic, styrene acrylic and vinyl acrylic copolymers are high-quality products. Their production process is based on various parameters such as dry matter content, viscosity, average particle size, vitrification temperature or minimum film formation temperature. This allows us to supply raw materials perfectly adapted to the needs and expectations.

Sil-cell® 43 has been found to be cost effective in the manufacturing of joint compounds, adhesives, auto body putty, cultured marble, wall patching compounds, stucco, ready mix gypsum plasters, resins, plastics and a variety of other composites. It can also be treated with unique proprietary surface coatings to modify the particle’s surface. In both organic and inorganic composites, these coupling agents improve adhesion.

BETOLIN® V30 is an anionic thickener, with easy biological decomposition, based in polysaccharides. Betolin V30 is a thickener and stabilizer very effective.

MAILOSE™ MP 100K is hydroxypropyl methyl cellulose ether (HPMC) with high viscosity. Could be soluble in cold water to form a transparent solution. Widely used in dry mix mortar industry.

Madol Madol 10 is a white dolomite. The dolomitic fillers are dust From Operating dolomitic rock and are among other products when crushing.

PERMACAST® MS-10,000 UL has high Build underlayment which is designed to provide a thick underlayment that fills mortar joints, cracks and voids in brick and masonry manholes.

Micronized Products Mica 60# range of products are obtained as a co-product from the pegmatite ore at our mining operation situated in the Limpopo Province in South Africa. After separation the Mica is delaminated, screened, milled and classified to specific size specifications.

Circosil® 0.5 is characterized by its special mineral composition from the Tobermorit group and the associated properties. In addition to high whiteness and defined porosity, the functional surface and chemical composition should be mentioned as characteristics. CIRCOSIL ® is a synthetically produced mineral that is produced hydrothermally from selected, high-quality raw materials. Modern process management and efficient quality monitoring guarantee the special properties of CIRCOSIL ® for our customers.

PERMACAST® MS-10,000 is used for structural renewal of manholes & underground sewer systems with high-strength & corrosion-resistant.

MAILOSE™ ME 150K is methyl hydroxyethyl cellulose ether(MHEC) with high viscosity. Could be soluble in water to form a transparent solution. Widely used in dry mix mortar industry.

Kel-Crete Premium Super Dry Admixture is a non-toxic admixture that is blended to provide water reducing, plasticizing, air entraining and gelling functions for the manufacture of pre-blended products for the plaster, masonry, shotcrete, concrete, etcetera industries. Normally the recommended amount to use is one ounce by weight per 100 pounds of portland cement/fly ash products. It meets EPA Leeds and Carbon Footprinting standards.

CoatMasters® 2007 NSC-AG is a Siloxane/Silane low VOC formulation, designed for use as a Non-Sacrificial Coating for AntiGraffiti, with an impregnating or penetrating type characteristic. It also functions as a water repellant for treating masonry surfaces. This water-based system, made up of advanced oligomeric silicone-based emulsion mixtures, is suitable for use on various grades of alkaline mineral substrates. This is ideal for treating porous and non-porous building materials of various type surfaces, newly constructed, rehabilitated, or restored type conditions. The product can be applied on precast concrete, clay roof tiles, exterior plaster, calcium silicate brick, light concrete, natural stone, clay brick, and terracotta. CM 2007 NSC-AG is breathable and provides water vapor permeability with resistance to staining and/or color deterioration. Additional benefits include excellent water repellency, minimized spalling, and a low odor for ease of application by brush, roll, flow, and/or spray. Before completely using and applying the product, we recommend checking and evaluating the final color and appearance from a sample substrate for approval. A change in color and sheen may slightly occur, due to the actual porosity of the surface. CM 2007 NSC-AG can be power washed for graffiti removal, please see additional instructions for recommended graffiti removal using power washing equipment. Recommended pressure will depend on the nature of the surface (porous and non-porous) and degree of graffiti to be removed. The results may vary during the cleaning process. IMRAE supplies graffiti cleaners compatible with CM 2007 NSC-AG, please contact the Technical Service Group for assistance.

Iparsol 90 (iso-Heptane) is a special boiling point product, mixture of paraffinic and naphthenic hydrocarbons with a very low aromatic content, typical value max. 50 ppm. By using suitable raw materials and hydrogenation processes, we are able to produce this product with only a mild odor. By varying the naphtenic content we can adjust the solvating properties.

KRONOClean® 7000 is a photocatalyst displaying pronounced photoactivity in visible light additionally to being active with UV radiation which makes it suitable for the interior.It effectively removes undesirable odors, degrades organic stains on surfaces, and eliminates numerous pollutants. As a catalyzing component, it can contribute to NOx degradation to improve air quality in towns.

Berolan LP 80 is a strongly surface-active air-entraining admixture and plasticizer. It is used as an air-entrainer for various cement-based systems, specially qualified for renovation render. Berolan LP-80 may be added as delivered. The required dosage may vary over a wide range (0.05 to 0.5 %) and should therefore be evaluated in suitable tests. For first trials we recommend 0.2 % Berolan LP 80 referred to dry substrate.

FENOL KIMYA Magnesium Stearate is a non-toxic stabilizer and tooth lubricant in the production of PVC profiles.

PERMACAST® CR-9,000 is a high-strength, fine-aggregate composite concrete that can be applied to concrete, clay, metal & brick culverts and cures in place within hours.