Products in Wallcoverings & Decorative Laminates

Brilliant Vinyl Colorants are liquid fluorescent high-strength, transparent colorants. They are ideal in tinting a wide range of applications such as plastisol inks, vinyl sheets, traffic cones and other vinyl-related products. Brilliant BVC Series is easily incorporated in plastisol and vinyl systems, using high-speed mixers or applicable mixing equipment. They perform well for indoor applications as well as outdoors.

Non-Silicone, Water-Based Anti-Foaming Agent for Paints and CoatingsBorchers® AF T is a non-silicone anti-foaming agent based on tri-n-butyl phosphate for use in a wide range of solvent- and water-based pigment pastes and highly loaded systems.

Brilliant Vinyl Colorants are liquid fluorescent high-strength, transparent colorants. They are ideal in tinting a wide range of applications such as plastisol inks, vinyl sheets, traffic cones and other vinyl-related products. Brilliant BVC Series is easily incorporated in plastisol and vinyl systems, using high-speed mixers or applicable mixing equipment. They perform well for indoor applications as well as outdoors.

Brilliant Vinyl Colorants are liquid fluorescent high-strength, transparent colorants. They are ideal in tinting a wide range of applications such as plastisol inks, vinyl sheets, traffic cones and other vinyl-related products. Brilliant BVC Series is easily incorporated in plastisol and vinyl systems, using high-speed mixers or applicable mixing equipment. They perform well for indoor applications as well as outdoors.

Brilliant Vinyl Colorants are liquid fluorescent high-strength, transparent colorants. They are ideal in tinting a wide range of applications such as plastisol inks, vinyl sheets, traffic cones and other vinyl-related products. Brilliant BVC Series is easily incorporated in plastisol and vinyl systems, using high-speed mixers or applicable mixing equipment. They perform well for indoor applications as well as outdoors.

Rovene 5499 is a film forming styrene-butadiene emulsion that was developed as an ink vehicle for thermoplastic polyolefin (TPO) based wall coverings. More specifically it can be formulated for metallic ink vehicles. Rovene 5499 provides inks with excellent adhesion to TPO wall covering substrates and good alkaline resistance properties.

ES1 is a melamine laminate composed of a white melamine paper core and various pigmented cover sheets. The three-ply material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull).

ES4 is composed of layers of a pigmented paper melamine resin inner cores and white, black, or colored cover sheets. The main difference between this product and ES-1 is that the ES-4 core is colored rather than white. The material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), and Lamicoid satin, or LS (non-brushed and dull). Contact Customer Service for Availability.

ES2 consists of three internal layers (two colored decorative surfaces, two white sub-cores just below the surfaces, and a black core centered in the thermoset composite material). ES-2 is a five-ply material, which comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard-thicknesses of 3/32 and 1/8 inch. Weights of the three standard-thickness sheets are approximately 7.0, and 9.3 lb., respectively. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

ES3 consists of a black phenolic paper core and two colored decorative surfaces impregnated with melamine resin. The three-ply, high performance material comes in a standard sheet size of 36 inches ± 1.00 x 39 inches ± 1.00, with standard thicknesses of 1/16, 3/32, and 1/8 inch. Standard finish options are polished, or P (highly polished and shiny), or LS (non-brushed and dull).

Polyester Jewels™ Sea Green 23P .008" Hex (P2308HX) Decorative article, particles precision-cut from specialty film; BoPET, polyester, vacuum deposited with aluminum for mirror-like reflectivity and coated with a translucent, color-infused polyurethane binder. Available as Glitter/Flake/Sparkles.

SYNPRINT AC 6054 is based on a patented interpenetrating network technology with film-forming properties. This technology combining two different ionic structures in the same polymer network increases the adhesion to multiple substrates with low surface tack. This technology allows a formulator to take advantage of the good aspects of a cationic acrylic without the traditional compatibility issues. Features and Benefits: Excellent adhesion to multiple substrates Low heat seal temperature requirements High compatibly with other resins and additives

USP-EAGLE (GP30-65) is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.

Tedlar® TCP10BG3 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Prismagum-G Red Oxide C940 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

BECKOPOX™ EP 140, a liquid binder and resin in the epoxy and epoxy derivatives family by CASE Ingredients, is recognized for its excellent moisture and solvent resistance. Serving the automotive and transportation, building and construction, industrial, and paints and coatings sectors, it offers good adhesion and low shrinkage. This product finds applications in automotive OEM coatings, marine coatings, and industrial settings like tooling and moldmaking. Compatible with metal substrates, its specialized uses encompass adhesives, trowelling, casting, laminating compounds, and coatings demanding high chemical resistance.

Tedlar® TPVF-116 PVF POLY is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way, and the surface performance to keep it that way.

USP-EAGLE (GP35-55) is an Unsaturated Polyester resin non pre-accelerated, thixotropic, very good adhesion to acrylic sheets, good wett-ability, and low viscosity.It is used in a spray, hand lay-up, glass fiber reinforced back lamination for sanitary ware.

Prismagum-G Red S220 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Plasticizer DOTP is an ester of 2-ethylhexanol and terephthalic acid, which is used as a commercial plasticizer with high dielectric properties, high cold resistance, reduced volatility.

Prismagum-G Yellow Oxide B776 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information

Tedlar® TWH15BL1 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Polyester Jewels™ Gunmetal 35P .008" Hex (P3508HX) Decorative article, particles precision-cut from specialty film; BoPET, polyester, vacuum deposited with aluminum for mirror-like reflectivity and coated with a translucent, color-infused polyurethane binder. Available as Glitter/Flake/Sparkles.

Polyester Jewels™ Penny Copper 30P .008" Hex (P3008Hx) Decorative article, particles precision-cut from specialty film; BoPET, polyester, vacuum deposited with aluminum for mirror-like reflectivity and coated with a translucent, color-infused polyurethane binder. Available as Glitter/Flake/Sparkles.

Tedlar® TGY85SL2 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

SYNPRINT AC 1104 is a styrene-modified acrylic copolymer emulsion for aqueous varnishes, flexographic, screen and gravure inks. Formulations containing SYNPRINT AC 1104 can be adapted to the requirements of a variety of different applications. Features and Benefits: High gloss, fast drying Very good heat and water resistance Excellent adhesion Very good abrasion resistance

Charmax™ LS AOM is a high purity Ammonium Octamolybdate of fine particle size.

K-FLEX® XM-359 is designed to provide long pot life in 2K polyurethanes and to prevent yellowing resulting from interaction with benzotriazole (BZT) UV absorbers in clearcoat systems. K-FLEX® XM-359 is a saturated, aliphatic resin modifier.

Tedlar® TWH15BL3 is a protective film that helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, the protective film provides long-term durability and performance. The protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

UVEKOL® FR-C is a liquid, one-component coating with a faster cycle time and strong impact resistance. This radiation-curable coating has outstanding adherence, making it perfect for ornamental laminates, wallcoverings, finishes, and materials. Furthermore, UVEKOL® FR-C is excellent at specialist coatings for glass, such as coatings for glass and other types of specialty coatings. This transparent liquid coating, which is applied using a radiation cure technique, provides a flexible way to improve a wide range of substrates and surfaces, especially glass.

Layflat Paper Application Tapes are designed to adhere to the liner flat for stacked jobs and easy to transport.

SiwoPUD® -990F is a aqueous, aliphatic polyurethane dispersion based on polycarbonate.

Polyester Jewels™ Navy 65P .008" Hex (P6508HX) Decorative article, particles precision-cut from specialty film; BoPET, polyester, vacuum deposited with aluminum for mirror-like reflectivity and coated with a translucent, color-infused polyurethane binder. Available as Glitter/Flake/Sparkles.

Santicizer® 154 is a liquid, non-halogen, triaryl phosphate ester fire retardant plasticizer used in multiple polymer systems. This plasticizer is similar to tricresyl phosphate in performance properties, but without the neuro-toxicity associated with ortho-cresol materials. Within the Santicizer® family of plasticizers, Santicizer® 154 offers the best fire retardant properties. Santicizer® 154 is a great option in many applications where fire resistance is paramount, but plasticization is not a key property or where plasticization may need to be compensated for.

Tedlar® TWH10BS1 protective film helps extend the look and life of the design, even in the most extreme environments. From severe weather to harsh chemicals, Tedlar® protective film provides long-term durability and performance. Tedlar® protective film can easily be applied to a range of surfaces, providing the flexibility to design your way and the surface performance to keep it that way.

Prismagum-G Orange A686 belongs to Prisma Colors' standard single pigment rubber masterbatch product range which are granulated into a small chip for easy dosing and quality dispersion.The product is also available in slab form and can be dispersed in different polymer types.Please contact us for more information