Products in Flooring & Surfaces: Resins, Binders & Matrix Materials

Crystic® Polyester Resin R115NT is a general purpose non thixotropic, non accelerated, orthophthalic, unsaturated polyester resin. It has a gel time of 10 minutes and can be used for the production of filled castings or for reinforced laminates on flat molds.

LRBG Chemicals USA MUF 400-6 is a melamine -urea formaldehyde resin spray-dried powder. It appears as a tan to white, free-flowing powder that forms a crust on the surface when exposed to moisture in the air. This powdered resin can be used in container wood flooring adhesives, wood adhesives, and for the compression molding of wood articles.

LRBG Chemicals USA MUF 400-15 is a melamine urea formaldehyde resin spray-dried powder, appearing as a tan to white free-flowing powder. It forms a crust on the surface by absorbing moisture from the air. This powdered resin can be used in container wood flooring adhesive, wood adhesive, and compression molding of wood articles.

LRBG Chemicals USA MUF 400PC is a light tan, free-flowing melamine-urea resin powder designed as an adhesive for hot-press or high-frequency wood bonding systems. When used correctly, it provides a waterproof bond and meets the requirements of the ANSI/AITC A190.1-1992 Standard for Structural Glued Laminated Timber. This resin is ideal for high-frequency, high-strength gluing of truck flooring, rail decks, and other laminated wood structures due to its fast cure and low arcing. However, LRBG Chemicals USA MUF 400PC is not suitable for cold-cure applications.

USP-EAGLE (GP30-65) is an Unsaturated Polyester resin non-economic slight dark color with good chemical resistance.It is used in glass fiber lamination and general-purpose.

USP-EAGLE (GP35-55) is an Unsaturated Polyester resin non pre-accelerated, thixotropic, very good adhesion to acrylic sheets, good wett-ability, and low viscosity.It is used in a spray, hand lay-up, glass fiber reinforced back lamination for sanitary ware.

USP-EAGLE (GP20-62) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color, rigid film, and low viscosityit is used in glass fiber lamination for general purpose applications.

USP-EAGLE (GP60-65) is Unsaturated Polyester resin pre-accelerated, thixotropic and excellent adhesion to acrylic sheetit is used in a spray, hand lay-up and glass fiber reinforced back lamination for sanitary ware.

USP-EAGLE (GP25-65) is Unsaturated Polyester resin non-accelerated, non-thixotropic, light color and low viscosityit is used in general-purpose & glass fiber lamination.

Super SAP® CPM/CPF is a versatile system designed specifically for the compression molding processes of composite parts. CPM system delivers a high bio-content, excellent fiber wetting qualities, and thixotropic characteristics to limit sag in high-temperature cure applications. A high modulus, combined with excellent elongation properties, enable durable yet lightweight composite parts. CPM is a Super Sap® Formulation.

Lerpol RS 61 Alogen free filled resin, very versatile and easy to be processed in HLU/SLU and closed mold techniques. Laminates made with this resin in combination with Lavecoat FT have succesfully met class HL3 HL3 in R1 and R7 according to EN 45545.

Rhino Linings USA, Inc. 1301 Resin is a Standard Undiluted Epoxy Resin. The standard press mold epoxy system for composite laminates and parts. All listed hardeners cure very quickly at standard process temperatures 160°F – 210°F.

ASTAMITE C3909 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE C603M is a Melamine Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Paceline ECO-Extreme Resin is a Non-Hazmat laminating resin that offers unmatched strength and ease of use. Laminates using this resin show a significant increase in flexural strength over those fabricated with industry standard resins. ECO Extreme Resin is designed to achieve a high modulus allowing the fabrication of thin and rigid laminates.

Fiberglass (A/Asia) Sales Pty 2719 Clear Casting Resin is a medium viscosity, low reactivity, and pre-promoted unsaturated polyester resin. It has a long gel time and a low exotherm and cures to a water white color with excellent clarity. This longer gel time and lower exotherm makes it suitable for larger castings.

Fiberglass (A/Asia) Sales Pty 342S VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. 342S Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

ASTAMITE MF600 is a Melamine Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Paceline Composite Matrix Resin is effortless to work with, and finishing edges is easy and smooth.

KPR 6460 by Kemrock Industries and Exports is a dicyclopentadiene (DCPD) based orthophthalate unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6460 is recommended for FRP composites.

Astaply HL4645 offers thermosetting liquid resins, specially formulated for the manufacturing of interior grade plywood. In the cured state, the resin is a cross-linked, insoluble, infusible material.

Fiberglass (A/Asia) Sales Pty 901 Swancor VE Resin is a general purpose type resin used in the manufacture of fiberglass reinforced plastic components, and other applications where it is resistant to a broad range of acid base and salt solutions up to 100 Deg. C. Swancor 901 Vinyl Ester Resin is normally supplied thixotropic and promoted to be catalyzed by either Interox SR or Butanox M50 catalysts. Other MEKP catalysts should be first tested before used for the development of a satisfactory level of cure. Where exposure to severe corrosive environments is to be encountered, post curing of laminates is strongly recommended.

Lerpol RS 48 Alogen free, filled resin suitable for HLU/SLU , RTM , Infusion and press molding.

ASTAMITE C910B is a Pre-Catalyzed Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE MU7 is a Melamine Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE C510M is a Melamine Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

KPR 6415 by Kemrock Industries and Exports is an orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6415 is used in sheets.

Havel Composites CZ sro Epoxy resin LH 1000 is suitable for adhesion, casting, and when it is wormed up to 35°C it is suitable for lamination and spraying into hot molds. Suitable hardeners: 133-138 (100:35 - weight), pot life 15-20min.; H 10 extra clear (100:45-50 weight), pot life 20-25min.

ASTAMITE C501 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

ASTAMITE C ONE SHOT is a Pre-Catalyzed Urea Formaldehyde Powder Resin. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.

Paceline Nano-Res Resin exhibits higher strength and rigidity than competing epoxy acrylic resins, and provides superior fiber wet out and working characteristics. It is excellent for use with Carbon Fiber, and other new age composite materials such as Kevlar, Spectra, Synthex, Basalt, etc.

KPR 6440 by Kemrock Industries and Exports is a general purpose, fire retardant orthophthalate-based unsaturated polyester resin (UPR). It is available as liquid and cast resin. Offers excellent mechanical and corrosion resistance properties. KPR 6440 is recommended for FRP composites.

Paceline EAR1 Resin has an optimized molecular weight which gives a lower viscosity and decreased surface tension providing a superior fiber wet out.

Fiberglass (A/Asia) Sales Pty Epoxy 2000 is an alkyl phenol free epoxy resin curative.

Paceline ECO Resin is a 2nd generation Non-Hazmat resin that offers high performance, and ease of use.

ASTAMITE C360 is a Urea Formaldehyde Resin Powder. The ASTAMITE Line offers thermosetting powder resins for use in a variety of industries. In it's cured state, the resin is a cross-linked, insoluble, and infusible material.