Products in Fillers, Levellers & Joints: Filler

Portaflame® SG 30 LV is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portaflame® SG 30 LV is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portaflame® SG 30 LV is a "low viscosity" optimized grade with an exceptional low oil absorption value, giving the formulator the opportunity to achieve higher loading levels. Portaflame® SG 30 LV makes formulations that are flame retardant.

Boud Minerals Feldspar FF20 is milled, crystalline anhydrous sodium potassium aluminum silicate.

Ziegler & Co. Naturprodukte MicaCelia is due to its high lamellarity and purity a very special functional filler. The finely tuned process of selection, grinding and classification guarantees a high aspect ratio and highest purity. As a natural silica, MicaCelia is chemically inert, resistent to most acids and oxidation, unsoluble in water and has a high temperature resistance. MicaCelia as a very pure muscovite mica exhibiting excellent electrical insulation properties. MicaCelia acts as a functional filler in anticorosion paints and in wall coatings and textured finishes, both for crack control and gloss control. Its lamellar structure allows to improve application of the coatings and their adhesion.

Extendospheres® 200/600 is our largest-sized hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

SILMIKRON® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Solospheres® S-45 Solid Spheres are semi-solid ceramic microspheres. They are an excellent choice for applications requiring high strength, high temperature, and corrosion resistance. Solospheres® spherical morphology are shear thinning in liquid applications allowing formulator to reduce the VOC’s and increase filler loading. Solospheres® can easily disperse in a high intensity mixing or dispersion system in plastics.

West System 404-45 High-Density Adhesive Filler, 43 oz is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

West System 407-B Low-Density, 14 lb is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

SIKRON® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Extendospheres® SG-300 is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Boud Minerals Marble Bianco Carrara is the traditional white Italian marble.

SILBOND® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Boud Minerals Calcined Flint Minigrain is an acid insoluble filler / aggregate obtained by calcining gray flints.

West System 410-B Microlight, 4 lb is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color. When West System® epoxy is thickened to a peanut butter consistency with Microlight™, the cured product sands and carves like basswood.

West System 410-7 Microlight, 5 oz is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color. When West System® epoxy is thickened to a peanut butter consistency with Microlight™, the cured product sands and carves like basswood.

West System 407-15 Low-Density, 12 oz is a blended microballoon-based fairing filler for WEST SYSTEM Epoxy. Add 407 to a mixture of epoxy resin/hardener to create a fairing putty. It’s easy to sand or carve this putty once it has cured. The filler is reasonably strong on a strength-to-weight basis. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive. Blended with epoxy to a “peanut butter” consistency, it will be easy to fair. The higher the percentage of 407 in your epoxy mix, the easier it will be to fair. Cures to a dark red/brown color.

MILLISIL® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Quarzsand is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Extendospheres® SLG is one of our general purpose hollow sphere grades. The SL product lines will improve abrasion resistance, modulus elongation, and the flow of paints resulting in a more durable coating. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Extendospheres® HD is our most versatile, general purpose hollow sphere grade. HD replaces heavier, more expensive components on an equivalent volume basis. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Extendospheres® SGT is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, highstrength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Extendospheres® HA has been designed for Refractory applications. Its high deformation temperature is able to withstand the casting temperatures of both aluminum and steel processes. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

West System 404-B High-Density Adhesive Filler, 30 lb is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Extendospheres® TG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

Ziegler & Co. Naturprodukte Perlite Microspheres is the multicellular, closed hollow spheres are produced from a volcanic raw material which is formed to a white, intert material with high volume by a special expansion process.

Ziegler & Co. Naturprodukte Boruvit is the glass powder Boruvit acts as a functional filler in coatings by its transparency, which stays neutral with any pigmentation. It ensures a longer lifetime for the coating due to the absorption of UV-radiation. Being a mechanically hard filler, it will increase scratch resistance and the particle shape will improve the adhesion and co-adhesion of coatings.

West System 404-15 High-Density Adhesive Filler, 15.2 oz is an epoxy thickening additive. We developed it for maximum physical adhesive properties in hardware bonding, or anywhere that high-cyclic loads are anticipated. Blended with epoxy, it makes an excellent gap filler or structural filets. Use this filler wherever you need an especially strong bond. You can blend it into any WEST SYSTEM 105 Resin/20X Hardener combination, G/flex Epoxy 650, or G/5 Five-Minute Adhesive.

Extendospheres® CG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

SEPASIL® is for industrial use, mighty, workable silica sand deposits are of decisive importance. Nevertheless, chemical purity and constancy are not enough in order to apply silica directly as a raw material. In Quarzwerke plants silica sands are thoroughly prepared. The raw material has to pass exten-sive cleaning-, classification-, drying- and iron-free grinding processes in order to produce silica sands, flours and powders. For the production of silica flours and -powders with a defined grain size distribution separation processes are required in addition to iron-free grinding. Quarzwerke are able to produce silica powders with grain sizes down to 1 μm due to a fine-tuned combination of grind- and classification technology. Another refining step is the surface-treatment with silanes or silan-based substances which can be adjusted to the respective application.

Solospheres® S-32 Solid Spheres are semi-solid ceramic microspheres. They are an excellent choice for applications requiring high strength, high temperature, and corrosion resistance. Solospheres® spherical morphology are shear thinning in liquid applications allowing formulator to reduce the VOC’s and increase filler loading. Solospheres® can easily disperse in a high intensity mixing or dispersion system in plastics.

Ziegler & Co. Naturprodukte Silmer is embedded in the chalk cliffs near the Channel coast, were washed down by the sea, moved on the seafloor and shaped round flint pebbles. These pebbles gathered near the coast. The are quarried and processed by washing and sorting In a calcining process in shaft kilns at 1600°C, the flint is converted to Cristobalite.

DakotaPURE™ mica is Pacer Minerals’ high-quality muscovite mica family of products mined and processed in the Black Hills of South Dakota. It offers a unique combination of mechanical, physical, chemical & thermal properties rarely found in other industrial minerals.

Extendospheres® SG is our most versatile, general purpose hollow sphere grade. Sphere One’s Extendospheres® are low density, high strength hollow ceramic spheres. They can allow the formulator to reduce the weight and overall cost of their finished goods.

XOL 200 are white aluminosilicate multicellular hollow spheres. They significantly reduce composite density. XOL products are surface modified for better dispersion, bonding and strength. This product offers excellent economics compared to other additives.

West System 410-2 Microlight, 2 oz is the ideal low-density filler for creating a light, easily-worked fairing compound especially suited for fairing large areas. Microlight mixes with greater ease than 407 Low-Density filler or microballoons and is approximately 30% easier to sand. It feathers to a fine edge and is also more economical for large fairing jobs. Not recommended under dark paint or other surfaces subject to high temperatures. Cures to a tan color. When West System® epoxy is thickened to a peanut butter consistency with Microlight™, the cured product sands and carves like basswood.

XOL 150 is a white aluminosilicate multicellular hollow sphere. They significantly reduce composite density. XOL-150 is surface modified for better dispersion, bonding, and strength. They can allow the formulator to reduce the weight and overall cost of their finished goods.