Products in Infrastructure, Roads & Paving: Core Material

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Lantor Soric® XF 2 is a flexible honeycomb foam mat used to add structure and thickness to composite laminates. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one. Unlike standard cell honeycomb, Aero-Mat is very flexible and will conform to compound shapes. The pressure resistant cells create thickness in the laminate without the added weight of extra fabric layers. It is ideally suited for reinforcing curved laminations where additional stiffness is needed.

Coremat® Xi 5 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

NIDAPLAST® 8HP is inflammable and it has excellent resistance to water and most acids, bases and salt solutions.The longevity for the core's storage is guaranteed by a anti U.V. - U.V. Protection of the finished panel is ensured by the skins of the sandwich panel.

Divinycell PN is a structural thermoplastic core material perfectly suited in a variety of sandwich applications to increase performance and reduce weight. Divinycell PN is used in industrial, transportation, marine and wind applications. It is easy to machine and has good dimensional stability at elevated temperatures. It is suitable for a variety of processes including infusion, prepreg and press bonding. The material has a stable closed cell structure and is insensitive to moisture, decay or rot, making it an excellent substitute for organic materials such as balsa and plywood. High density Divinycell PN (PN200 and PN250) is particularly suited for flooring, decking, local inserts in the way of fittings; either tapped or bolted through and has very good screw retention. Divinycell PN is 100% recyclable.

Soric® SF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

ArmaPET™ Eco95 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

Coremat® XM 4 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

CORAFOAM® U 310 is used as Polyurethane rigid foam PUR. can be cut with almost any type of tool. Its closed cellular structure and absence of fibers or granular structure result in crisp, excellently defined edges after fabrication. It is also impermeable by any type of liquid, including water and solvents, making it much better suited for severe weather conditions or harsh marine environments than many other materials.

TYCOR® W7.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

Kayco Composites U6 is a rigid, closed-cell, high-density polyurethane foam core panel. It is a foam with no reinforcement.

Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.

Skincore® A601 is a surface enhancement package for superior surface quality. It is an easily drapeable and conformable material, is compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for infusion, CCBM and RTM Light.

Soric® TF 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Polyumac Stru-Cell Structural PVC P80 is a high performance PVC foam core that sets the standard for sandwich composite structures. As well as its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures and its closed-cell construction means that it does not absorb water.

Coremat® XM 3 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Polyumac Stru-Cell Structural PVC P60 is a high performance PVC foam core that sets the standard for sandwich composite structures. As well as its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures and its closed-cell construction means that it does not absorb water.

Soric® XF 4 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Lantor Soric® LRC 2 is a flexible, low resin consumption honeycomb foam mat used to add structure and thickness to composite laminates. It absorbs approximately 20% less resin compared to the “Lantor Soric XF” 2MM Aero Mat resulting in a lighter finished product. The compression resistant hexagonal cell structure and resin flow channels make Aero-Mat ideal as a core material and infusion medium in one.

Soric® LRC 2 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Soric® XF 10 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

Polyumac Air-Cell T-150 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

ArmaPET™ Struct FR150 is self-extinguishing version of ArmaPET Struct, we offer a structural foam core designed for applications with particularly stringent fire protection requirements.

Kayco Composites U20 is a rigid, closed-cell, high-density polyurethane foam core panel. It is a foam with no reinforcement.

ArmaPET™ Struct GR135 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

Nidagravel IG040 is an ideal material for making permeable surfaces. Combined with IG040 slabs, it allows the creation of parking spaces or even stable access routes while maintaining soil permeability in urban areas. Flexible and fitted with thick walls, IG040 tiles guarantee the strength and longevity of your projects. Between the walls of the slab, the gravel remains in place and increases the stability of the whole. IG040 tiles, easy to install, are delivered pre-assembled by 4 and are assembled using a simple and robust fixing system. The lightness of the slabs and their preassembly ensure a quick installation allowing you to carry out several hundreds of m² per day.

TYCOR® W4.1 provides designers a cost advantage compared to balsa and structural foam. The fiber-reinforced pre-form core is designed for vacuum infusion. It is comprised of fiberglass webs which develop nearly allthe core’s mechanical properties upon infusing and helps prevent resin race tracking even in contoured shapes. Fine cell foam minimizes excess resin absorption and provides durability during handling and processing. TYCOR® W0.1 engineered core materials optimize weight, stiffness and strength in infused applications enabling structures that can be made lighter, less expesively and more reliably than old generation core materials.

ArmaPET™ Struct GR320 is the versatile and durable solution for structural sandwich applications, with a more environmentally responsible approach. Provides a unique combination of material and processing properties, such as durability, elevated service temperature stability and excellent compatibility with most common resins and manufacturing methods.

Soric® LRC 1.5 is the cost effective solution for closed mold processes. It is used as core material and infusion medium. It is a pressure stable polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It is suitable for closed mold processes, including Infusion, RTM Light, RTM Heavy.

ArmaPET™ Eco75 is combines insulation and structural integrity, ensuring energy and emission efficiency for decades of use. Energy-efficient composite sandwich structures are a powerful way of saving energy and reducing CO2 emissions. Armacell is following the growing demand for high-performance insulating materials and with ArmaPET Eco it offers a foam core that optimally combines structural performance, versatility, sustainability, and long-term insulating properties.

Kayco Composites R20 is a rigid, closed-cell, high-density polyurethane foam core panel. The reinforced panel is a sandwich construction with fiberglass reinforcements. The fiberglass reinforcements are offered in several schedules.

Coremat® Xi 1 is the cost effective solution for open mold processes, It is used as core material and/or print blocker It is a polyester nonwoven and compatible with all regular types of resins, including Polyester, Vinylester, Phenolic and Epoxy. It Is suitable for hand lay-up and spray-up process

Nidagravel® 140 gives an impression of space and allows to combine mineral and vegetal. It is ideal for creating walkways, garage accesses, terraces, etc. With nidagravel plates®, each gravel coating becomes much more practicable than in the past. The alveolar structure of nidagravel plates® allows, in fact, to keep the gravel perfectly in place. Their dimensions guarantee you a quick and easy installation. Walking, cycling, using a wheelchair or driving your child's stroller is no longer a problem. Soft floors, unsightly ruts, annoying puddles and dangerous potholes are just a bad thing memory.

Kayco Composites R15 is a rigid, closed-cell, high-density polyurethane foam core panel. The reinforced panel is a sandwich construction with fiberglass reinforcements. The fiberglass reinforcements are offered in several schedules.

Fire Shield LFST - 36P is a low-density syntactic material specifically designed to meet the flame, smoke and toxicity requirements of Marine and infrastructure applications. Produced from the most advanced resin and hollow glass microspheres available, the mechanical properties of this flame retardant material make it the ideal solution for challenging engineering projects.

Divinycell P is a closed-cell PET structural core with excellent fire, smoke and toxicity behavior. It is thermoplastic and recyclable, offering good mechanical properties, high chemical resistance and does not absorb water. Divinycell P is ideal but not limited to applications requiring demanding FST properties like public transport, architecture or commercial marine. Due to its good dimensional stability at elevated temperatures, Divinycell P can be processed with medium temperature pre-preg systems and it is compatible with most commonly used resin and manufacturing systems. Divinycell P is easy to thermoform, cut or mill.