Suppliers in Building & Construction

"QuakeWrap, Inc., the original innovator and developer of Fiber Reinforced Polymer (FRP) products for infrastructure repair and renewal. QuakeWrap and QuakeWrap, Inc. President/CEO Prof. Mo Ehsani have spent over 25 years pioneering advanced construction technologies utilizing FRP. QuakeWrap’s patented FRP products – including the innovative PileMedic® and PipeMedic® repair systems – are field-proven to rehabilitate, retrofit and strengthen assorted structures worldwide, with award-winning results. QuakeWrap solutions represent an extraordinary improvement over traditional infrastructure repair methods. We strive on creating new innovative products that result in higher quality, faster construction time and at a lower cost. This is evident by the numerous patented technologies we have developed, such as PileMedic® for repair of deteriorated steel, timber and concrete columns and submerged piles, SuperLaminate® for spot repair of pressure pipes, StifPipe® for repair of gravity or pressure pipes subjected to external gravity loads, and InfinitPipe® a revolutionary onsite manufactured pipe of virtually any size and length. QuakeWrap was founded in 1994 by Dr. Mo Ehsani, Professor Emeritus of Structural Engineering at the University of Arizona, who pioneered the introduction of FRP to the construction industry and is an internationally-recognized expert on the subject. Dr. Ehsani has been featured on CNN, The History Channel, National Public Radio, and in other media, including Engineering News Record (ENR) for his expertise on the strengthening of structures, particularly related to earthquakes, terrorist attacks and other potential structural disasters."

As part of the Veolia Group, Multiport GmbH specializes in the production of compounds and regrind from HDPE plastic packaging waste from households, industry and commerce. Our compounds and regrinds are used alone or as admixtures in the production of a wide variety of plastic products and replace new plastic made from petroleum.The Multiport GmbH and its sister company MultiPet GmbH form in Bernburg with a total capacity of approximately 70,000 tons per year and more than 150 employees one of the largest plastics Mineral processing locations in Europe .

DKS is your chemical partner for a sustainable future. We are committed to protecting the environment, promoting revitalization, and creating a circular economy. Our advanced science-based products are designed to provide maximum performance and maximum efficiency to future generations. We strive to create a world that is prosperous and healthy for generations to come. Our goal is to ensure that our customers have access to the highest quality chemicals available. We are dedicated to providing solutions that are safe, reliable, and effective. By partnering with us, you can rest assured that your future will be secure.

"SEI Chemical is a leading manufacturer of antimicrobial treatments and coatings, corrosion preventative chemicals and coatings and building restoration and cleaning products. SEI also designs, licenses and private labels architectural, commercial and industrial coatings."

PPG pioneered the development of amorphous precipitated silica in the 1930s. That legacy of quality, reliability and technical accomplishment continues. Today, we remain a globally recognized leader and innovator in the industry, supplying a wide range of high-quality silica products, backed by a world-class service and technical support network that is dedicated to fulfilling the everyday demands of its customers, and to helping them meet the challenges of tomorrow.

Hapco is a world-leader in the design, development and manufacture of thermoset polymer alloys including; high-strength polyurethanes and epoxy resins for parts and tooling production, potting and encapsulating compounds, Liquid Molding™ plastics and structural adhesives.

GEOKOM has been established in 1995 as an enterprise for the production of the milled and finely dispersed fillers on the base of the natural or modified mineral materials, and first of all - marble, dolomite, talcum, barite, wollastonite and white mica (muscovite). Subsequently, the product line was expanded with inorganic fire retardants (aluminum and magnesium hydroxides, hydromagnesite), natural and calcined kaolins, engineering clays / organoclays.

We dedicate our efforts to develop, produce, market and deliver products and services of the highest quality and uniformity that consistently meet our customers’ needs. In this endeavor, we are committed to continually improve the reliability of our products, services and the overall performance of our organization in order to meet our obligations to our customers, our suppliers, our employees and our stockholder.

"Our Mission Our Roadmap starts with our mission, which is persistent. It proclaims our purpose as a company and works as the standard against which we considered our engagements and decisions. Provide a state-of-the-art high performance rosin and terpene derivative resins and compounds as raw materials for different and numerous industries."

"We specialize in the manufacture of semi-finished products made from engineering plastics. Our focus is on the production of LiNNOTAM , a very strong, durable cast polyamide from our own development. POM and PET complement our program. Over 7,000 tons of engineering plastics per year - that is our volume. We are among the top manufacturers worldwide. Durable materials, individual cuts, variety in dimensions - that is very important here. The art of polyamide and semi-finished products is the way in good recipes and precisely adapted production equipment. That is why with us recipe development and system setup go hand in hand."

"The Unitechem Group is one of China’s largest specialty chemicals companies, engaging in R&D, application development, production, sales, trading and machinery manufacturing. We are located in Suqian City’s Ecological, Chemical & Technology Industrial Park in Jiangsu Province, with currently over 1300 employees, an annual sales revenue of RMB 1.2 billion (€150m), and assets exceeding RMB 1 billion (€125m). Unitechem specializes in the production of light stabilizers, UV absorbers, antioxidants and other related products. We sell our products all across China and globally to key markets in the U.S., Europe, Asia (incl. India, Korea, Japan, Vietnam), the Middle East and other countries and regions. In 2020 we have established our fully-operational subsidiary Unitechem GmbH in Düsseldorf, Germany to directly serve our European customers."

Being the largest supplier of fine chemical in Asia, GO YEN CHEMICAL INDUSTRIAL CO LTD( GYC Group) has accomplished with strong, excellent and multinational R&D team. 9 divisions in GYC Group provide more than 80 items, and keep exchanging technology with Japan, Switzerland, Germany, etc. The Overseas Department of GYC promotes the products to important cities, which are the target markets in the world. GYC products have been sold to more than 60 cities. For more than forty years, GYC has played an active role in fine chemical field in Asia. As a high tech chemical enterprise, GYC Group’s principle is to have advanced technology and new concept to create comprehensive product lines. Therefore, we have been emphasizing and making effort on inventing the latest technology and products. With the mighty R & D capability, our core competitiveness, GYC is able to develop unique and new products which are fitted in market trend and able to break through traditional products. To enhance the competitiveness of the products, GYC overcome the blind spot of traditional products and enhance of the function of the parallel products. It has earned the reputation from the field. GYC provides industries in Taiwan and great overseas industries unique and innovative products continually.

Protecto Wrap Company has been manufacturing waterproofing membranes since 1952 and has built a sound reputation for producing some of the highest quality waterproofing systems available. Our products meet or exceed the design requirements and specifications for a variety of applications. Protecto Wrap offers design consultation and field technical support for all product lines, which include: residential weather barriers, flooring underlayments and commercial building envelope solutions.

"IMS Polymers was established in 2014 in Turgutlu Organized Industrial Zone – Manisa . We develop and produce functional engineering plastics for many sectors, especially electrical & electronics, white goods, automotive, energy, health, construction sectors. Our people are committed to producing functional and innovative composites. The materials developed in the laboratory are characterized by using internationally accepted test and analysis methods and then submitted for mass production. IMS Polymers takes maximum care to ensure the continuity of material quality in production. Our company established an R&D office in the ideEGE technopark building within Ege University in January 2015 in order to develop university-industry cooperation and carry out product design studies."

Established in 1972, Mazda Colors Ltd. has been in the business of manufacturing phthalocyanine pigments for over four decades. In 1992, Mazda was acquired by The Choksey Group, led by Amit Choksey as Chairman and Managing Director. Since then, strategic expansion, acquisition and innovation have heralded a phase of exponential growth in terms of capacity, product range and sales turnover. Adequate reinforcement of capital, manpower and infrastructure has further fuelled the company’s success. Mazda is today the largest CPC Crude producer in India and manufactures a complete range of phthalocyanine pigments. Mazda has also established a trading division for AZO, Inorganic and Carbazole Violet pigments. Mazda’s total production exceeds 12000 metric tons annually and the company is growing at a CAGR of over 12%. Starting out as a domestic player, Mazda has emerged as a trusted, world-class brand.

"Kelly Chemical Corporation was established in 1965 and initially begun as a producer of specialty colorants. Today Kelly Chemical Corp. is a manufacturer and distributor, consisting of an Export Arm in Colorants and Functional Resins as well as an Import Arm in additives, surface technology and specialty chemicals. Our philosophy of Honesty, Innovation and Speed coupled with our mission ""To be total solution supplier of specialty chemicals through technical expertise and quality management"" has been successfully helping the company to enjoy good reputation in the industries we serve. Today Kelly Chemical Group consists of 7 manufacturing facilities, 14 sales offices, 3 application laboratories, all strategically located throughout China, Taiwan, Vietnam and Thailand (Asia 4 markets). Moreover, our export arm has access to more than 40 strong worldwide sales networks."

"Since 1921, Elektro-Isola A / S has manufactured and refined some of the world's best composite materials, and today our components are a crucial part of the machinery in wind turbines, hospital scanners, the aerospace industry, particle accelerators and other high-tech functions in the global society. But we can also get an electric scooter or the arm of a gravko to glide effortlessly. Or we can help a few innovative engineers with the prototype that will realize their vision. We would rather accept professional challenges of the kind that push development and the future in the right direction. The exciting thing about our composite materials is precisely all the possibilities that lie ahead of us. Maybe you can spot them yourself - otherwise we can look at them together. We are more than 150 specialized and experienced employees at our family-owned factory in Vejle, and every year we deliver unique solutions to a large number of highly satisfied customers. So we know what we're dealing with. We know how products and processes can be optimized. And we know that dedication is the foundation of a perfect result. "

DMI develops novel reactive chemistries, which solve processing, performance, and related issues for advanced materials. We create new monomers and functional oligomer products for structural technology. To date, DMI has over 40 patents pending, several of which have been granted. These patents cover a broad range of applications that assist formulators in solving difficult problems while providing their companies with clear market differentiation advantages. DMI is a global supplier of reactive monomers and oligomers, as well as formulated compositions that help to enable the creation of differentiated products in the microelectronics, oil and gas, automotive, and composite markets. If you have a business where superior chemicals (adhesive, coating, catalyst, release agent, hardener, toughener, etc.) can significantly increase your market share or profit, please contact us to see how we can be of assistance to you.

Dyna-Tech Adhesives is a manufacturer of water-based adhesives and coatings, hot melt adhesives, packaging adhesives, advanced resin dispersions, packaging adhesives, and UV & EB coatings and adhesives. As a division of Rex-Hide Industries, Dyna-Tech Adhesives, Inc. was founded in 1981 to manufacture environmentally friendly, rubber-resin, water-based, pressure sensitive adhesives for the tape, label and graphic arts industries. These products became the core of the company in what is now the Tape and Label Market Segment of the business. Dyna-Tech has since developed many additional products for the Tape and Label Market Segment, as well as products that participate in the Hot Melt, Packaging, Energy Curable, and Resin Dispersions Market Segments.

Flex Foam has stood the test of time. We first opened our doors in 1978 and have continually advanced our capabilities. We are the first and only manufacturer of urethane products in Arizona. From our humble beginnings to our current facility, home to four state of the art manufacturing plants, we appreciate the people we have been fortunate enough to work with.

Shiraishi has been constructively developing and using calcium carbonate for 100 years. Even though many consumers may not notice the existence, the calcium carbonate products that we make are active in many diverse ways around them. Such wide range of usage of calcium carbonate owes to the technologies that provided it in particle shape and even changed its properties in a number of ways. These technologies made it possible to link calcium carbonate with other materials according to needs. They help control the required properties of final products, including the reinforcing of rubber or plastic products, the gloss of paper, and more. Our task is to support macro engineering with micro level surfaces. In fact, our work is all about "surface".

"Since our founding in 1940, we have industrialized vinyl acetate emulsion for the first time in Japan in 1946. Since then, we have provided adhesives, adhesives, and paint resins mainly for acrylic polymers for construction, automobiles, and various industries , and are now being applied to IT-related fields. In addition, utilizing the polymer synthesis technology accumulated over a long history, we are expanding additives and raw materials for pharmaceuticals and cosmetics in Japan and overseas at the newly established Life Science Division in 2012. The plastic molding business also started injection molding in 1947, and three years later, it started extrusion molding at an early stage, and it is used for automobile airbags and optical fibers, which are safe and secure parts that require reliability and high technology. It offers. Based on this molding technology, we are developing LSR (Liquid Silicone Rubbers) in the medical field. As a partner who can always provide higher value to our customers, we would like to continue to grow together. We look forward to your continued support in our activities."

"Hollingsworth and Vose is a global manufacturer of advanced materials used in filtration, battery, and industrial applications. Family-owned for seven generations, the company’s origins go back to 1728 when an ”Act for the Encouragement of Making Paper” was passed by the General Court of the Province of Massachusetts Bay. Evolving continuously since that time, H&V now operates manufacturing and research & development facilities in the Americas, Europe, China and India. Today, H&V’s advanced materials contribute to a cleaner world through their use in products that provide clean air, clean liquids and energy storage. H&V’s materials can be found in filters for clean rooms, hospitals, computers, commercial buildings, homes, cars, trucks and heavy duty equipment, and also in batteries used mainly in telecom and hybrid vehicle applications. Our Company is headquartered at our plant site in East Walpole, Massachusetts USA, on the same river where the enterprise began more than 250 years ago."

H-O Products Corporation founded in 1971, is an engineered solutions provider of pressure sensitive tapes, pads and gaskets as well as cushioning, mounting, specialty packaging and sealing solutions. We offer a very wide range of substrate materials, adhesives, and films from which we will combine to produce the exact type of tape, pad or gasket to suit any requirement for environmental protection, noise proofing, packaging, or protecting an OEM product. Today, H-O Products serves over 1,200 clients in more than 20 different industries worldwide including Construction, Energy, Fenestration, Window & Door, Electronic OEM's, Appliance Manufacturers, HVAC, Acoustics, Medical, etc. Since 2000, H-O Products follows the Lean Manufacturing/Kaizen Approach for Continuous Improvement. Our productivity and Average Outgoing Quality Limit (AOQL) has improved year after year, for over 21 years. We perform machinery upgrades, process mapping, cross training and apply lean manufacturing principles to our entire operation. H-O Products is an ISO 9001:2015 registered company.

Polyols & Polymers Pvt.Ltd. was established as a firm – Polyols & Polymers in the year 1989. With minimal financial support and maximum confidence in technical knowledge – Mr. Prabir Kumar Dutt decided to take this bold step after spending more than a decade in one of the National Research Laboratory under the Council of Scientific Research, he resigned from his position of Senior Scientist. We take pride to let the world know that we are the pioneer manufacturer of Ketonic Resins in the sub continent. Polyols & Polymers Pvt. Ltd. has developed all its products and has scaled from Lab Scale projects to commercial production in-house. We have experience in successfully handling a wide variety of chemistries for a large industrial base.

"Established in December,1998. Puyang Ruicheng Chemical Co.,Ltd is a collection technique development, production,and operation in a body's enterprise company which is specializing in producing petroleum resin.The site is located in Zhongyuan oilfield seat, Puyang city--a national health, garden, civilized and excellent tourism city and it owns the rich and convenient resource.Ruicheng has a registered fund of RMB100 millions and consists of 3 big companies. 　Our main products include of C5 petroleum resin,C9 petroleum resin, terpene resins ,C5/C9 copolymerization petroleum resin, Dicyclopentadiene resin (DCPD), and Coumarone etc.The product capacity of all kinds of our products is about 90 thousand ton and also is rising every year.These resins are widely used in many fields such as rubber, adhesive, traffic paint, hot melt adhesive,printing ink, and high grade coating, etc. 　Ruicheng is dedicated to technological innovation and owns a group of modern management ,technical personnel, with scientific, systematic, strict, and formal management and production system.It set up development and research department for new products and new processes. Except that, the company has special analysis room which is equipped with advanced analytical tools and perfect product test methods, so that it can random trace and detect products at any time. Moreover,it has passed ISO9001,ISO14001,and ISO18001 System Certification and has self-export right, the products have been sold in many countries and districts such as Japan, Korea, German, Canada, Singapore, Finland, America, Bengal, Thailand,Taiwan etc and the company has established good cooperative relationship with them."

As a leading producer of carbon fiber reinforcements and resin systems, and the world leader in honeycomb manufacturing for the commercial aerospace industry, we are the strength within hundreds of products offered in multiple markets across the globe.

BYK Additives & Instruments is one of the worlds leading suppliers in the field of additives and measuring instruments.

"Klaas Coatings is a market leader with its Silicone Resin Emulsion Paint (SREP) protective coating system for concrete and masonry substrates. Klaas Coatings is committed to bringing products of high performance, functionality and durability to the commercial coatings market. The philosophy is simple: quality without compromise, easy application, minimal maintenance. The goal is for customers to realize a beautiful esthetic finish from a wide color range with proven protection for the structures they own, build or manage. Innovative formulations, advanced raw material technology and manufacturing quality control is the cornerstone to products created. And an environment responsibility: products are water-based with low level VOCs and an efficient production process to minimize waste."

"WSD chemical established in 2000,we are professional engaged in the research, development, production, sale and service of PVC additives。. We are located in Shengzhou City,Zhejiang,China, near to Shanghai, Hangzhou ,Ningbo, YIwu .and have convenient transportation access.Our products have used on big markets,such as South Korea, Vietnam, India, Philippines, Pakistan, Bangladesh,Afghanistan, Qatar, Kuwait, United Arab Emirates, Saudi Arabia, Jordan, Bahrain, South Africa, Madagascar, Ethiopia, Tanzania, Kenya, Burundi, Dominica, Algeria, Peru, Chile, Bolivia, Brazil, Mexico, Uzbekistan, Tajikistan, Belarus, Russia and other countries and regions。"

"Zhejiang Haishen New Materials Co., Ltd. was founded in 1990 and is located in the Industrial Zone of Lihai Town, Binhai New City, Shaoxing City, Zhejiang Province. The company has been rated as a ""high-tech enterprise"" and ""provincial R&D center"", and has passed quality, environmental protection, occupational health and related export certifications. The company uses the ""Jinshi"" brand as a registered trademark, and mainly produces and sells hydroxypropyl methyl cellulose (HPMC), hydroxyethyl cellulose (HEC), polyvinyl alcohol (PVA), redispersible latex powder (RDP) , Starch Ether (HPS), etc. Products are widely used in different fields such as building materials, coatings, oil drilling, PVC polymerization, daily chemicals, ceramics and so on. Through more than 20 years of unremitting efforts and innovation, the market share has continued to increase, and the product quality and full-service system have been highly praised by users. At present, the products have been sold all over the country and more than 60 countries and regions. ""Because of sincerity, gold and stone"" is the service tenet of Haishen. Adhering to the accumulation of Haishen culture for more than two decades, we have always been determined to be among the ranks of well-known brands and become an excellent service provider for personalized customization of cellulose ethers in China. "

"Alloy Exchange, Inc is proud to be your full-service post-industrial recycling center as well as your cost save resource for top quality reprocessed ABS & PC/ABS. Over the last 38 years our products and services have developed with two things in mind; environmental friendliness and increasing your bottom line. Alloy Exchange was created in 1980 as a processing and trading company to handle chrome-plated material generated by local automotive companies. Over the years we have developed an extremely efficient environmentally-friendly mechanical plating removal process. With 100% of our feedstock coming from Plating- grade scrap, Alloy Exchange’s finished products maintain very consistent material properties lot after lot, year after year. As a result, more than 90% of our reprocessed ABS & PC/ABS resins are currently used in strictly-regulated automotive cost-save applications. As your ‘One-Stop’ recycling provider, Alloy Exchange will transport your scrap to our 56,000 square foot reprocessing facility located in Rockford, Michigan. Once there, well-trained and experienced employees will verify the material’s integrity before sending the paper or corrugated scrap to be baled and the plastic scrap on to be size- reduced and compounded. By using the closed-loop recycling process, Alloy Exchange can deliver your toll-processed regrind and/or pellets back to you at a considerable cost savings over virgin resins."

Gehring Construction was founded in 1949 by the late Walter Gehring. After serving in WWII as an aircraft mechanic, he began working with concrete in Columbus, NE. Walter and his partner specialized in residential concrete and block foundations. The business grew and was incorporated in 1971. We entered the retail concrete market the same year establishing a ready-mixed concrete plant. Our construction crews provide commercial and residential concrete work specializing in street and highway paving. We continue to enhance our facilities and equipment to better serve our customers.

"Since 1967 ACI has become a "go to" source for plastic supply and fabrication. Aci enjoys a number of long term relationships with retailer and fixture manufacturers. Our unique attributes include prototyping and design services ,fast turnaround ,manufacturing facilities centrally located in the us ,use of domestically produced components."

Tinting Systems Company (TSC) was established in 2003 in Saudi Arabia with a vision to become the world’s premier Colorants/Pigment pastes manufacturer. Over the years, we have grown from strength-to-strength offering an expansive range of colorants/Pigment pastes for Decorative, Industrial and other Special applications. With the use of extensive research and acumen of our talented team, consisting of experienced engineers, chemists and industry professionals, we manufacture advanced, high-quality products, and cater to a diverse range of applications beyond the mainstream -Walls and Floors. These include outstanding industrial grade pigment pastes with high performance and high concentrates for Plastics, PU Foam, Wood and Furniture, Synthetic Leather, Textiles and many more applications.

"In 1990 the Höglmeier waste disposal company founded the first plastic recycling center in southern Germany in Raitenbuch, Bavaria. From this, the medium-sized family company HP-T Höglmeier Polymer-Tech GmbH & Co. KG emerged in 2001, which has been operating independently since then. We deal exclusively with the grinding, regranulation and compounding of technical plastics, develop individual recycling concepts for you and develop your own polymer materials together with you."