Consumer Goods

Hexcel

HexForce™ AGP193-P

HexForce™ AGP193-P has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

FIBERTEC INC.

MICROGLASS 3004

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 3016

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICROGLASS 7204

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Hexcel

HexForce™ 232

HexForce™ 232 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 4522

HexForce™ 4522 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 3733

HexForce™ 3733 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ GA180

HexForce™ GA180 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ SGP370-8H

HexForce™ SGP370-8H has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Innegra

Innegra H fibers

Innegra™ H fibers are hybrid fibers containing Innegra H fibers and high modulus fibers including, but not limited to basalt, carbon, and glass. These fibers are intermingled at the filament level with a variety of combinations.

FIBERTEC INC.

MICROGLASS 7232

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

FIBERTEC INC.

MICA 20S

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

FIBERTEC INC.

MICROGLASS 7216

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Zoltek

ZOLTEK™ PX35 MILLED CARBON FIBERS

ZOLTEK’s PX35 Milled Fibers are specifically processed PAN (polyacrylonitrile) based fibers for lower cost applications. ZOLTEK PX30 High Purity Milled Fibers are 99+% pure carbon fibers derived from ZOLTEK’s high temperature batch graphitization process. All ZOLTEK milled products are free of any sizings. ZOLTEK’s in-house milling system ensures product quality and traceability from raw material through finished product.

Hexcel

HexForce™ SA060

HexForce™ SA060 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ RGP280-5H

HexForce™ RGP280-5H has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 120

HexForce™ 120 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ TEF7

HexForce™ TEF7 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Zoltek

ZOLTEK™ PX35 VINYL ESTER COMPATIBLE TOW

Zoltek has developed a new product and sizing chemistry for use in vinyl ester resin systems. Introducing Zoltek’s PX35 Vinyl Ester Compatible Tow product. This new product, based on our proprietary sizing chemistry, exhibits excellent adhesion to and compatibility with vinyl ester resin systems. Most carbon fiber products are used to reinforce epoxy resin systems. Recently, the demand has grown for a product and sizing chemistry that can be used in vinyl ester resins whether cured thermally or via room temperature infusion. When compared to Zoltek’s standard carbon fiber product, PX35 Epoxy Compatible Tow, the new vinyl ester compatible product has significantly higher interlaminar shear strength (ILSS) and transverse flexural strength TFS, which both measure and indicate fiber to resin matrix compatibility and adhesion, as well as, composite performance. Zoltek’s PX35 Vinyl Ester Compatible Continuous Carbon Fiber is manufactured from a polyacrylonitrile (PAN) precursor fiber. The consistency in yield and mechanical properties that are provided by large filament count strands gives the user flexibility to design and manufacture composite materials.

Hexcel

HexForce™ 716

HexForce™ 716 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Zoltek

ZOLTEK™ PX35 UD200

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

3B Fibreglass

3B Fibreglass MF 01 ER

3B Fiberglass MF 01 ER are E-CR glass filaments ground to a specified density. MF 01 ER is designed to reinforce products like thermoplastics, thermoset resins, glues, coatings, and adhesives within a large range of applications and markets.MF 01 ER represents a main improvement compared to minerals when aiming for a higher stiffness and/or better impact properties in combination with specific properties, such as flow enhancement, flame retardancy, uniform isotropic shrinkage, resistance to acid environment, coating stability, etc. MF 01 ER can be collocated in between mineral fillers and most com-monly available milled fibers as it dis-plays an intermediate length/diameter aspect ratio. The product comes in a powdery form that provides both improved flowability/handling and low density.

Hexcel

HexForce™ 717

HexForce™ 717 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Zoltek

ZOLTEK™ PX35 P/TW28-50

ZOLTEK PX35 Tow Weave Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Quick composite part build-up is cost effectively achieved with our cosmetically attractive carbon fiber fabrics. Applications include large composite tooling parts and esthetically appealing finished composite components.

FIBERTEC INC.

MICROGLASS 9110

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Innegra

Innegra IS-2800

When high modulus fibers are combined with Innegra IS-2800, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

Chomarat

DIAGOTEX™ D988

DIAGOTEX™ D988 is a 45g/m fixed, open and flat carbon braid, with angles of +44°/-44°. Its construction ensures isotropy of mechanical properties, while maintaining a distinctive appearance. It is used in particular in sports equipment.

Hexcel

HexForce™ 3783

HexForce™ 3783 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

DowAksa

AKSACA™ 12K A-42

AKSACA™ 12K A-42 is a High Quality Carbon Fiber.

Hexcel

HexForce™ 1583

HexForce™ 1583 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 7715

HexForce™ 7715 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 477

HexForce™ 477 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 1B301

HexForce™ 1B301 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

3B Fibreglass

3B Fibreglass EM 1011

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

Hexcel

HexForce™ 282

HexForce™ 282 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.

Hexcel

HexForce™ 7642

HexForce™ 7642 has extensive in-house weaving capabilities for the manufacture of unidirectional and woven reinforcement fabrics in glass, carbon, aramid fibers and hybrids. The wide range of weave styles includes standard weaves, biaxials and multiaxials.