Products in Other Consumer Goods Applications

Sylvin™ 86020-85UV Clear is a vinyl compound formulated for extrusion applications that require good low temperature properties and a ultra violet stabilizer.

UNISTAB BC-305 has excellent heat and light stability.

Evernox 565 is a highly effective antioxidant for a variety of elastomers including polybutadiene (BR), polyisoprene (IR), emulsion styrene butadiene (SBR), nitrile rubber (NBR), SIS. Evernox 565 is also used in adhesives (hot melt, solvent-based), natural and synthetic tackifier resins, EPDM, ABS, impact polystyrene, polyamides, and polyolefins. Evernox 565 is highly effective at low concentrations, matching the performance of other stabilizers at higher levels. It is non-staining and due to its low volatility, it’s not lost during polymer processing, drying or storage. Evernox 565 can be used in a wide variety of applications. In unsaturated elastomers, it prevents gel formation, maintains excellent polymer color, and prevents changes to molecular weight (e.g. Mooney viscosity). The dosage levels of Evernox 565 vary by polymer and range from 0.05% to 0.5%. Extensive performance data is available in many of the substrates mentioned above. The relatively low melting point allows easy dispersion in elastomeric substrates by commonly used melt compounding techniques or it can be incorporated into process streams by dissolving in suitable organic solvents or aromatic extender oils.

A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.

Sylvin™ 9600-60 Red 6186 is a vinyl compound formulated for injection molding applications.

A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.

Armlen PP E/P 20-2 is a elasticized, frost resistant composite material. Designed for molding of bodywork for electrical and general goods. Available in natural and black colors.

8 MELT FLOW HIGH IMPACT COPOLYMER FOR INJECTION MOLDING Pinnacle Polymers Polypropylene 3208 is made via UNIPOL PP technology, which utilizes gas-phase fluidized bed reactors with a high activity catalyst system to ensure uniform physical properties and lot-to-lot consistency.This product is intended for injection molding of automotive and consumer product applications. Also contains a long-term heat aging additive system.The 3208 product provides: Wet/Dry environment resistance Superior balance of stiffness and impact strength Excellent long term heat aging properties Excellent color and processing stability Enhanced weld-line strength Pinnacle's 3208 polypropylene is covered under US FDA Food Contact Notification 864. As such, this polymer can be used in contact with all food types under Conditions of Use A-H, as described in 21 CFR 176.170, Tables 1 and 2. This polymer also complies with 21 CFR 177.1520(c), items 3.1(a) and 3.2(a).

Loyblend HA-1300 is high flow PMMA ABS polymer alloy. This grade offers high hardness, good scratch resistance and excellent weathering resistance with a high gloss surface.

Nylene Specially polymerized nylon 6 resin possessing high clarity and very low viscosity Designed specifically for use in manufacturing concentrates and other compounding uses The low viscosity of Nylene 400 aids in dispersion and mixing of concentrates and pigments, and can be used as a carrier for both type 6 and type 6/6 nylons

ULTRA-PLAST™ WF101 contains amide, which has reactive sites available for hydrogen bonding and can therefore act as a coupling agent between polymer and filler. ULTRA-PLAST™ WF101 acts as an efficient blending and dispersing agent in wood filled systems, leading to a more homogeneous blend. ULTRA-PLAST™ WF101 works as an excellent lubricant under high shear conditions, for example injection molding.

BP Flex Thermoplastic Elastomers are based on SEBS polymers (Styrene-ethylene/butylenes-styrene) providing increased oxidation and weather resistance, higher service temperatures, and increased processing stability.Features: Low Temperature Performance, Excellent Tensile Strength, High Reprocessable Valves - seals, Grommets, Under Hood Applications

Sylvin™ 4200-68HMWUV Clear 8468 is a vinyl compound formulated for extrusion applications.

A soft, black unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.

IRM Synthetic waxes are produced by the Fischer-Tropsch process. This process converts natural gas, coal or other carbon rich stock into long chain paraffins. Fischer-Tropsch waxes are very hard, high melting, and white products, free of any aromatic impurities. They consist mainly of saturated, long straight-chain hydrocarbons with only a small number of iso-alkanes (methyl branches). Their high linearity and sharp carbon distribution produce a narrow melt range, making these waxes highly versatile for wax formulation. The oil content of synthetic waxes is very low and consists mainly of short-chain paraffins.

General purpose poly(phenylene ether) (PPE) intended for injection molding This product is UL recognized

PP TV 30 regranulate is a PP TV black Polypropylene mineral filled

Sylvin™ 8200-45 Clear 8382 is a flexible vinyl compound formulated for general purpose extrusion or injection molding applications.

N55A-EE0 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

Aekyung Chemical LS-123 is an ortho type UPR.

Sylvin™ 9915-90 Blue 8364 is a vinyl compound formulated for molding applications.

Sylvin Technologies Sylvin™ 9724-80FUV Green 3179 is a vinyl compound formulated for injection molding applications that require low plasticizer migration properties, an ultra violet stabilizer and antifungal ingredients.

Sylvin™ 9266-85 Natural is a vinyl compound formulated for extrusion applications.

Duhor® N-PL/S is a flame retardant and smoke suppressor. DUHOR® N-PL/S is surface untreated white powder of magnesium hydroxide with limited particle size distribution and specific morphological properties.

Nilit NILAMID® A3 W GF55 is a Polyamide 66 (Nylon 66) compound, 55% glass fiber reinforced, heat stabilized.This compound is intended for injection molding.NILAMID® A3 W GF55 is primarily designed for the Automotive industry. It is also suitable for Electrical and Electronic or Industrial & Consumer applications.

Fine-Blend EMI-230B is styrene-acrylonitrile binary random low molecular weight copolymer, and it has colorless bead appearance.

IRM's natural waxes, formulated using plant derived oils instead of petrochemicals, are commonly used in candle wax formulations. Our Indranat line of waxes can be mixed with paraffin and microcrystalline waxes to produce candle wax blends with varying melting points, textures, and burn time. Though hydrogenation soy oil is "transformed" into a solid which mimics the characteristics of beeswax. As a component of a wax blend, soy waxes impart characteristics such as lower melting point, higher malleability, and quicker burn times.

DynaStar™ 77330-9000 contains applications such as tourniquets, tubing, bumpers, covers, plungers etc.

Sylvin™ 8676-85C Clear 893 is a vinyl compound formulated with improved stability for clear profile extrusion applications.

COPYLENE® CH200LN is designed for general purpose injection molding applications with anti-stat, nucleation and controlled rheology.

CBS (CZ) Particle is Secondary Sulfonamide. It is grayish white or yellowish powder with slightly odor and nonpoisonous. It is soluble in benzene, methylbenzene, chloroform, carbon disulfide, carbon tetrachloride, methylene chloride, acetone and ethyl acetate; not easily soluble in ethyl alcohol; insoluble in water,dilute acid, dilute alkali and gasoline.

HDPE product for film are bimodal products with ideal distribution of molecular weight, have good processability and are fit for high-quality film. Due to good mechanical properties and processability, YUHWA HIDEN F600 are used for shopping bags and packaging film of all types.

CompaDur® 121 GF 30 FR (013) is a PBT, injection molding grade, 30% glass fibers, heat-stabilized, flame retardant, high stiffness and strength.

POLYNIL® P75 BR is a bright unreiforced Polyamide 66 (Nylon 66) for extrusion.This 3.1 viscosity Polyamide 66 resin is FDA compliant.

Alkyl Amines Chemicals Diethylamine is a Clear,colorless liquid with strong ammonical odor.

Sylvin™ 8270-82FUV White 1227 is a vinyl compound formulated for extrusion applications that require improved outdoor weatherability.