Products in Lighting

LUMAsite® Crystal II is Near-clear product.

PLASMER® 1380B/N is a flame retardant grade that can be widely used in automobiles and electrical/electronic parts. PLASTOMER ® 1380B/N is a fully crosslinked product and can be reused without scrap during processing.

Outline: FZ-1140-D5 is a 40% glass fiber reinforced polyphenylene sulfide compound with reduced flash and improved mechanical properties for connector use. Color: Black and Natural (Brown).

LUMAsite® Parchment-SOS has Gentle “Shoji” effect and high transparent white.

PLASMER® 2065B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASTOMER ® 2065B/N can be reused without scrap during processing.

PE FRML is Flame-Retardant Masterbatch of PE with low production costs, adjustable flame-retardant properties is obtained by adding flame-retardant plastic masterbatch to general PP ,and it still has good mechanical properties, aging resistance, thermal stability and good processibility. The mixture of Flame Retardant Masterbatch and PE can replace flame-retardant PP to spinning, extruded plate , sheet , membrane , tube, electrical wire and cable and used for electrical apparatus, communications equipment's, lighting , decorative lighting for Christmas , mining electric apparatus and electrical parts, etc.

High light reflection grade, Anti-environmental pollution type (Non-bromine/Non-phosphor type), Flame resistant grade

Abdullah Al Barrak Plastic Products Polycarbonate Diamond Sheet 2100 x 3000 has an attractive diamond embossed pattern. The sheets are stronger and flexible, providing superior spanning and load-bearing capabilities. Polycarbonate Diamond sheets can also withstand extremes of temperature more readily than other material and with Long life UV protection, they are also more resistant to the long-term effects of weathering. Polycarbonate Diamond Sheets has several characters with high impact resistance, lightweight and can be easily cold bend processed and hot molding can be done. Hence, it can be widely used in construction and decorations. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

CMC Klebetechnik CMC 12064 is a double-sided polyester tape that has a permanent high adhesive strength on both sides.

ESTOPLAST EP 1500GY166 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

ESTOPLAST EP 2015BB01 is a Polybutylene Terephthalate - Glass fiber reinforcement, which is 15% used in interior parts of automotive as well as in bobbins, E-motor components, lightings and lamp fittings.

Abdullah Al Barrak Plastic Products Polycarbonate Textured Sheet 2100 x 3000 has a texture or pattern which is embossed on its surfaces. By the texture diffuses the natural light, which streams in and ensures uniform dispersion of light over a large scale area that can prevent glare. It is more used mainly in the partition with beautiful decoration effects. We present to our clients superior quality sheets, manufactured by the well qualified and experienced engineers of by using high-grade raw material and components at our manufacturing unit.

Gemapilen® GF20 CP is 20% glass fiber reinforced PP Co-polymer and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

ESTOPLAST EP 1500GY165 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

PLASMER® 1055BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1055BM/NM is a fully crosslinked product and can be reused without scrap during processing.

White Ice 510CR is a Thixotropic, No-Sag, and No-Drip type non-reactive Thermally Conductive Silicone Grease with a high thermal conductivity and low thermal resistance. This product is formulated with specialty binding agents to achieve lowest amount of bleed/pump out and evaporations. It is specially designed for vertical applications with vibration and large gap. Offers excellent stability over wide temperature ranges. Easy to apply by dispensing or screen print/Stencil.

Next PC CX-02WH is PC UnFilled White Compound.

Starex BM-0320 E by LOTTE Advanced Materials is comprised of Acrylonitrile Butadiene Styrene. It is commonly used

Policril® Standard 2000 is characterized by excellent optical clarity, stable & tough, lightweight and policril sheet lends itself to a variety of fabrication and molding techniques and can be cut and drilled using a conventional range of tools.

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

TECACOMP PA66 TC gray 4057 is a Polyamide 66 (PA 66) polymer.

CMC Klebetechnik CMC 12100 is a double-sided tape used for splicing. A green coating is applied to one side of the substrate.  Adhesive polysiloxane with a high initial tack. On the other hand, there is an acrylic adhesive that is still present.  provides good anchorage to low energy surfaces and will cure further after heat exposure.

Red Ice 615 is specifically designed to eliminate compound “dry-out” problems due to the continuous exposure temperatures exceeding 200C (392F). This non-silicone thermal compound specially formulated for applications with continuous temperatures exceeding 200 degree celcius and intermittent temperatures up to 250 degree celcius. It shown outstanding stability and efficient heat transfer for the full operational life of your hardware. Red Ice 615 is a low cost solution for high temperature heat transfer applications. Offer high temperature stability up to 250 degree celcius. This thixotropic compound provides high di-electric property, excellent wetting, dispensability and long term stability.

High light reflection grade, Anti-environmental pollution type (Non-bromine/Non-phosphor type)

PC-COM PC415-50 is a medium flow general purpose polycarbonate grade with UV absorption. Applications include automotive interior covers and lighting.

Features Clear and transparent Rigid and tough Great for headlamps, bottles and transparent assemblies Excellent humidity/moisture resistance

PLASMER® 2055B/N is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 2055B/N can be reused without scrap during processing.

INFINO FD-1112L by LOTTE Advanced Materials is comprised of Polycarbonate. It is commonly used

Light diffusion grade, (Non corresponding UL96)

Features Clear and transparent Rigid and strong Great for investment casting patterns Headlamps, bottles and transparent assemblies

PLASMER® 1045BM/NM is a general purpose grade capable of various types of extrusion and injection molding. It is mainly used in automobiles, industrial and household electrical/electronic parts, and in the construction industry. PLASMER ® 1045BM/NM is a fully crosslinked product and can be reused without scrap during processing.

ESTOPLAST EP 1500GY117 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Gemapilen® GF10 is 10% glass fiber Reinforced PPH and are manufactured with Homo-Polymer or Co-Polymer to fit requirement. They increases the mechanical properties of products much further than what can be obtained through the use of mineral based compounds and enhancers or natural blends. It is an alternative to straight polymer use or mineral compounds are wide ranging and benefit a number of plastic manufacturing sectors.

NUDEC®PC polycarbonate plastic sheets are outstanding for their impact strength and high temperature resistance. For this reason, they are often used for applications in sectors such as construction (roofing, cladding, antivandal urban furniture), security (shields and protective masks, vehicle armor, lamps protection) or the industrial safety sector (protection for machinery, personal protective equipment).

CMC Klebetechnik CMC 70097 is a temperature-resistant double-sided adhesive tape with a high-adhesion, temperature-resistant pure acrylic adhesive on both sides. These adhesives are distinguished by their aging resistance and chemical resistance.