Electrical & Electronics

IDI Composites International

IDI™ BMC 46-12

PRODUCT SERIES: 40 SERIES BMCPRODUCT DESCRIPTION: DIELECTRIC & FLAME RESISTANTElectrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.

Quantum Composites

Lytex® 9063-E

Lytex® 9063-E is an epoxy high performance, fiberglass reinforced ESC® molding compound designed for military and aerospace structural applications requiring excellent mechanical properties, retention of properties at elevated temperatures, good chemical resistance and excellent electrical properties. It meets the requirements of MIL-M-46069 and MIL-M-46892.

Menzolit Ltd.

Menzolit® SMC 2300

menzolit® SMC 2300 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

IDI Composites International

IDI™ SMC E-206

PRODUCT SERIES: E200 SERIES SMCPRODUCT DESCRIPTION: UL YELLOW CARD SMCElectrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.

Quantum Composites

AMC® 8592

AMC® 8592 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 12K tow.

Polynt Group

Polynt Group HUP 16/23 RB-7035-V

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Polynt Group

Polynt Group SMC LS 3800 R25 RF C NERO

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Menzolit Ltd.

Menzolit® SMC 0190

menzolit® SMC 0190 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

Polynt Group

Polynt Group HUP 19/23 RN-Color

Polynt Group HUP 19/23 RN-Color is generally used in electronic and electrical applications.

Sumitomo Bakelite Company

Sumikon® PM-9750

Polynt Group

Polynt Group HUP 17/29 RB-7032

Polynt Group HUP 17/29 RB-7032 is generally used in electronic and electrical applications.

IDI Composites International

IDI™ BMC 48-50

PRODUCT SERIES: 40 SERIES BMCPRODUCT DESCRIPTION: DIELECTRIC & FLAME RESISTANTElectrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.

Quantum Composites

Lytex® 4149

Lytex® 4149 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

IDI Composites International

Rosite™ 6060D

Rosite™ 6060D has good electrical properties and is available in bulk molding compound form.

IDI Composites International

IDI™ BMC 3550F

IDI™ BMC 3550F is used as electrical insulators and flame resistant bulk molding compound. Rosite™ high strength BMC composites are suitable for use in electrical applications requiring materials that possesses dielectric properties and flammability performance.

Polynt Group

Polynt Group BMC RF 600-20

Polynt Group BMC RF 600-20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and excellent fire protection grade are combined into the BMC RF 600-20. BMC RF 600-20 is certified V0 1,7 mm by UL laboratories. BMC RF 600-20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polynt Group

Polynt Group BMC RF 9/20

Polynt Group BMC RF 9/20 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good mechanical properties and good fire protection grade are combined into the BMC RF 9/20. BMC RF 9/20 is certified V0 3,0 mm by UL laboratories. BMC RF 9/20 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Menzolit Ltd.

Menzolit® SMC 0170

menzolit® SMC 0170 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogens nor any candidates from the REACH SVHC list.

IDI Composites International

Rosite™ 3550D

Rosite™ 3550D is a composite material available in bulk molding compound form.

Polynt Group

Polynt Group HUP 17/25 RB-Color

Polynt Group HUP 17/25 RB-Color is generally used in electronic and electrical, foundries, peroxides applications.

IDI Composites International

IDI™ BMC B10 (Glass Content 20%)

IDI™ BMC B10 (Glass Content 20%) is a cost effective, general purpose line of composites suitable for use in a wide range of applications. Suitable applications are typically structural in nature with no flammability requirements. These products can be pigmented and are available in a variety of colors.

Menzolit Ltd.

Menzolit® SMC 2600

menzolit® SMC 2600 is a sheet molding compound based on unsaturated polyester resin. The product is glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neither does it form droplets nor is smoke generation excessive. The material is compression molded in heated steel molds. It is recommended to work with chrome plated tools. The product contains no halogens or heavy metals nor any candidates from the REACH SVHC list.

Polynt Group

Polynt Group BMC RF 9/15

Polynt Group BMC RF 9/15 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good fire protection grade and good flow are combined into the BMC RF 9/15. BMC RF 9/15 is certified V0 3,0 mm by UL laboratories. BMC RF 9/15 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Quantum Composites

Quantum Composites QC-8700

Quantum Composites QC-8700 is a vinyl ester chopped E-glass fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance. It exhibits unusual toughness, and is suggested for applications subject to impacts and rough handling.

Quantum Composites

Quantum Composites QC-8705

Quantum Composites QC-8705 is a vinyl ester ESC® molding compound reinforced with continuous, unidirectional (0°) glassfibers. It provides high strength,stiffness, and fatigue resistance in the fiber direction, and can be used to selectively reinforce other materials.

IDI Composites International

IDI™ BMC B51 Series 48-50

PRODUCT SERIES: B51 SERIES BMCPRODUCT DESCRIPTION: ELECTRICAL GRADEThese materials are suitable for use in applications requiring superior colorfastness & physical property retention upon exposure to UV and visible light

IDI Composites International

IDI™ SMC E-208

PRODUCT SERIES: E200 SERIES SMCPRODUCT DESCRIPTION: UL YELLOW CARD SMCElectrical applications requiring a composite material that possesses a UL Yellow card and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.

IDI Composites International

IDI™ BMC Rosite 3550D

PRODUCT SERIES: Rosite 3000 SERIES BMCPRODUCT DESCRIPTION: HIGH STRENGTH UL YELLOW CARDThese high strength BMC composites are suitable for use in electrical applications requiring materials that possesses dielectric properties and flammability performance from UL94 HB, V-0 & 5VA. These materials can be found in Underwriters Laboratory file E53587.

IDI Composites International

Dielectrite™ E-206 SMC GX30

Dielectrite™ E-206 SMC GX30 is a sheet molding compound materials which are designed to address electrical applications requiring a composite material that possesses a UL Yellow card and flammability performance. These products are available in a variety of reinforcement loading.

Menzolit Ltd.

Menzolit® BMC 0200

menzolit® BMC 0200 is a bulk molding compound based on unsaturated polyester resin. The productis glass fiber reinforced and contains mineral fillers. In case of fire the product doesn’t melt, neitherdoes it form droplets nor is smoke generation excessive. The material is injection molded in heated steel molds. It is recommended to work with chrome plated tools. It does not contain any halogensnor any candidates from the REACH SVHC list.

The Mitsubishi Chemical Group

SymaLITE®

SymaLITE is a special class of lightweight composites that offer low thermal expansion and exceptional mechanical and physical properties. Made from mixed glass and polymer fiber fleeces, SymaLITE is available in rolls and boards, which can be further molded into three-dimensional components using low-pressure molding.Features:Low thermal expansionExcellent mechanical and physical propertiesUltra-light and freely shapeableNoise-absorbentDirect facing with functional or decorative cover layers without adhesivesBenefits:Cost-efficient production of three-dimensional componentsDurable and noise-insulating material for car undershields and engine coversImpact-resistant and non-weathering for outdoor applications in the automotive and construction industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.Applications:Automotive and caravan industryConstruction sectorCar headlinersOutdoor applications in the automotive and caravan industrySubstitute for wood-based materials and rigid foams in sandwich constructions for the caravan and commercial vehicle industry.

Plastics Engineering Company

Plastics Engineering Company 07507 Single-Stage Phenolic

Plenco® 07507 is an organic reinforced resole phenolic molding compound offering improved dimensional stability under humid conditions. 07507 offers excellent resistance to degradation from detergent solutions at elevated temperature. UL recognized under component file E40654. 07507 is available in black.

Plastics Engineering Company

Plastics Engineering Company 03303 Two-Stage Phenolic

Plenco® 03303 is a mineral and flock-filled phenolic molding compound offering excellent electrical insulating properties. UL recognized under file E40654. 03303 is available in black.

Plastics Engineering Company

Plastics Engineering Company 06404 Two-Stage Phenolic

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plastics Engineering Company

Plastics Engineering Company 06582 Two-Stage Phenolic

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Cuyahoga Plastics

Cuyahoga Plastics AB1000F

Cuyahoga Plastics AB1000F is an extremely high heat resistant, electrical grade thermoset composite molding compound. Compression, transfer and injection molding grades are available. It is currently supplied in bulk form, cut preforms and box length extrusions.