Products in Electrical & Electronics: Antioxidant

BIONOX® 168 is a hydrolytically stable phosphite processing stabilizer, exhibits low volatility and is particularly resistant to hydrolysis, protects polymers which are prone to oxidation, during the processing steps (compounding/pelletizing, fabrication and recycling) from molecular weight change (e.g. chain scission/crosslinking) and prevents discoloration.

AO B215 with good synergistic of antioxidant 1010 and 168, can retard heated degradation and oxidative degradation of polymeric substances during processing and in end applications. It can be widely used for PE, PP, PC, ABS resin and other petro‐products. The amount to be used may be 0.1%~0.8%.

BIONOX® 1098 - a sterically hindered phenolic antioxidant, is an efficient, non-discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is particularly effective in polyamide polymers and fibers.

Key to responding to accommodating high value-added plastics. Our antioxidants are used for various applications such as electric wires, high-voltage cables and resins that protect distribution cables. As the diversification of plastic picks up speed, better quality will be sought, including for components used to establish information networks. With our accumulated know-how and technology, we are actively engaged in research and development to meet these needs

Plaox B215 with a good synergistic of Plaox-1010 and Plaox-168, can retard heated degradation and oxidative degradation of polymer substances during processing and in application. It can be widely used for PE, PP, PC, ABS resin and other petrochemical products. The dosage is recommended to be 0.1 ~ 0.8 phr.

Johoku Chemical JP-312L is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Nanjing Shuguang Chemical Group Antioxidant SG-R 405 is one kind of highly effective, odorless, nontoxic general rubber antioxidant, and has small pollution among the amine antioxidants. Applied to natural rubber and chloroprene, SBR, isoprene, NBR, and so on, it can effectively protect from aging caused by heat, light, ozone, flex-fatigue and cracking. It has a good synergetics with sulfur-containing antioxidant. In contrast to other general antioxidants, SG-R 405 has an inimitable advantage when used in plastic and electric wire and cable, food packing material, adhesives, especially in chloroprene rubber and food packing, medical and health care product as rubber parts, light or garish colored rubber products, in the advanced rubber electric cable as well as the polyether, in advanced lubricating oil. Therefore, it is the ideal substitute of the antioxidant A, antioxidant D,, RD, 264, 4010, SP, WH-02, and the recommended dosage amount is 0.5-2%.

Key to responding to accommodating high value-added plastics. Our antioxidants are used for various applications such as electric wires, high-voltage cables and resins that protect distribution cables. As the diversification of plastic picks up speed, better quality will be sought, including for components used to establish information networks. With our accumulated know-how and technology, we are actively engaged in research and development to meet these needs

Evernox MD1024 is highly efficient hindered phenolic antioxidant and metal deactivator for polyolefins and certain thermo-plastic elastomers utilized as primary insulation in contact with copper.

Plaox 1010 is widely used for PE, PP, PC, POM, ABS resin and so on. The dosage is recommended to be 0.1 -0.5 phr..

ADK STAB 1500 also called 439 is applied in ABS, PVC and also contains features such as excellent thermal and color stability.

JYANOX 1024 Antioxidant is a characteristic of nondiscoloring and has a good synergistic effect with general antioxidant.

Plaox 168 is a kind of phosphite ester antioxidant. It has a good synergistic with other antioxidants, for example, Plaox-1010, and Plaox-1076. It is widely used for PE, PP, PC resin, etc. The dosage is recommended to be 0.1 ~ 1.0 phr. Plaox-168 can be used in food contact plastics.

Gabriel Chemie HP79720AO is easy usage, applicable for films, tapes, boards, profiles, pipes, polymer foams, cable isolation, as well as for injection molding. It is Antioxidant for polyolefins to increase stability during processing as well as for recycling processes and used for freezing mixtures.

Plaox DSTDP is a thioester auxiliary antioxidant with good performance and with higher antioxidant effect than Plaox-DLTDP. It is of low volatilization, low heat loss in processing, non-polluting and non-discoloring. It has well synergistic of antioxidant Plaox-1010, Plaox-1076. Plaox-DSTDP is widely used for PE, PP, PA, ABS resin, etc. The dosage is recommended to be 0.1 ~1.0 phr.

Sinobase Polymers Chemical 944 is an HALS characterized by extremely low volatility, high thermal stability and excellent compatibility with many substrates. Its oligomeric structure make it particularly effective when use in thin section articles such as fiber and film. It is suited for use in polypropylene, LDPE, HDPE,XPE,EVA and PP blends with elastomers.

NBC(NDBC) Powder is a Rubber Antioxidant.

ADK STAB 1178 also called TNPP can be applied in polyolefins, ABS, PS, and engineering plastics.

BNX DLTDP (123-28-4)is a thioether antioxidant. High solubility and superior properties make it particularly suitable for the protection of plastics, rubber, synthetic fibers, and petroleum products against deterioration and discoloration. Used in combination with phenolic primary antioxidants, it has proven particularly effective as a result of synergistic effects.

BIONOX® DSTDP is a dialkyl ester of thiodipropionic acid that is used as a heat stabilizer in combination with a sterically hindered phenolic antioxidant.

AO 1076 is a nonpolluting nontoxic Antioxidant with good heat‐resisting and water‐extracting performance. Widely applied to polyolefine, polyamide, polyester, polyvinyl chloride, ABS resin，synthesize rubber and petroleum product, often used with DLTP for promoting the antioxidative effect.

MBZ Powder is a Rubber Antioxidant.

Cromex PE-AO 50015 is used in films and bottles for content protection and parts subjected to high temperatures.

Cromex PE-AO 5080 is used in film bottles for content protection, high temperature submitted parts, stop machines and products with long cycles of processes.

Johoku Chemical JPM-311 is a antioxidant, heat resistance stabilizer, non-discoloring stabilizer for plastics, lubricants.

Nanjing Shuguang Chemical Group Antioxidant SG-R 602 applies to nature rubber and synthetic rubbers such as SBR, NBR, chloroprene rubber, etc. with aging protection. It has protection from hot oxygen aging, flex fatigue and cracks. It can deactivate metals with various valences. SG-R 602 has remarkable heat anti-brittle function in chloroprene rubber, and strengthens the anti-ozone aging protection capability. It can reduce the Mooney viscosity of the chloroprene rubber, extend scorch time, enhance heat aging performance of the rubber material, increase the processing safety and the storage stability, so it is one of the most preferred antioxidants for chloroprene rubber.

AO 2246 is a high‐efficiency nonpolluting Antioxidant , applicable to the manufacture of synthetic rubber, latex and natural rubber, being one of excellent phenol Antioxidants. It is applicable to light colored or colored rubber product. In plastic industry, this product can prevent the thermal aging and light aging of polyester chlornamee,polystyrene,ABS resin, polyoxymethylene and cellulose resin with the dosage of 0.5‐1%.

SUNOX® 1010 - a sterically hindered phenolic antioxidant-is a highly effective, non discolor- ing stabilizer for organic substrates such as plastics, synthetic fibers, elastomers, adhesives, waxes, oils and fats. It protects these substrates against thermo-oxidative degradation.

EVERNOX-1098 and / or EVERNOX-1098GF, is a sterically hindered phenolic antioxidant of highly effective, non-discoloring stabilization for organic materials. It protects these materials against thermo-oxidative degradation.

Everaox® 1010 has a long-term thermal stability and is a multifunctional antioxidant.

EVERNOX-1330 is used in polyolefins e.g. polyethylene, polypropylene, polybutene for the stabilization of pipes, molded articles, wires and cables, dielectric films etc. Furthermore, it is applied in other polymers such as engineering plastics like linear polyesters, polyamides, and styrene homo- and copolymers. It may also be used in PVC, polyurethanes, elastomers, adhesives, and other organic substrates. EVERNOX-1330 can be combined with other additives such as costabilizer (e.g. thioesters, phosphites, phosphonites), light stabilizer and other functional stabilizers. The synergistic blends of EVERNOX-1330 with EVERFOS-168 are extreme performance in polymers stabilization.

EVERNOX-1098 is a sterically hindered phenolic antioxidant of highly effective, non-discoloring stabilization for organic materials. It protects these materials against thermo-oxidative degradation. EVERNOX-1098 is especially recommended for use in polyamide molded parts, fibers, and films. It can also be used with various polymers such as polyacetals, polyesters, polyurethanes, adhesives, elastomers as well as other organic substrates. EVERNOX-1098 has good compatibility, high resistance to extraction and low volatility. It provides excellent processing and long-term thermal stability as well as superior initial resin color. It can be used in combination with other additives such as costabilizers (e.g. phosphites, thioesters), light stabilizer (e.g. UV absorbers, hindered amines), and other functional stabilizers. The synergistic blends of EVERNOX-1098 with EVERFOS-168 (also called EVERNOX-B1171) provide a great performance in polymer stabilization.

PowerNox™ 1098 contains a chemical name called N,N'-Hexamethylenebis(3,5-di-tert-butyl-4-hydroxyhydrocinnamamide).

China Star Materials N-(p-toluene-sulphonylamido-N'-phenylene diamine) (Antioxidant TPPD) is mainly used to produce rubberized fabric, electric insulative products and light color industrial products. When TPPD is used in CR with Antioxidant ODA as co-reagent, it will perform its best thermal resistance, reduce the plasticity of unvulcanized CR, and decrease the degree of shrinkage during calendering, so is helpful to adjust the size of semi finished articles.

Antioxidant-1076 can be widely used for PE、PP、POM、ABS resin、PS、polyvinyl alcohol, engineering plastics, synthetic rubber and petroleum products.

AO-1098 is widely used for PA,such as Nylon 6, Nylon 66,PP,PE,ABS resin,and rubber,etc.