Products in Other Electrical & Electronics Applications

Sinobase Polymers Chemical 622 is widely used in polyethylene, polypropylene, polystyrene, olefin copolymer and polyester, soft PVC, polyurethane, ABS and polyamine etc. It has good consistency with antioxidants and UV absorbers.

JRCure-1022 is light yellow powder in appearance.

Qpac® 130 Poly(Cyclohexene Carbonate) is an amorphous, clear, readily processable solid polymer with long-term mechanical stability.

NIRETAN B 30 N is regionally available in Europe.

EP GC 308 SY is a woven glass cloth epoxy (epoxide) resin.

PPS-SG505E45 PPS is a 50% glass fiber reinforced polyphenylene sulfide compound developed to provide low cost and good engineering properties and processability

PA6 / ABS alloy, Impact modified

Cyclohexane Carbonyl Chloride is also known as Cyclohexanecarboxylic acid chloride, Cyclohexanoyl chloride, Hexahydrobenzoyl chloride. It is used as intermediate in chemical manufacture.

Sunlube MG-10 is in powder form and chemically known as Magnesium Stearate.

Morplas® Green 3(45-700) is dye line, which has good heat stability and is ideal for a wide range of plastics applications. Dyes can be combined with the plastic resin before to processing or added to the plastic during the process. They are soluble in various polymers at diverse amounts and have no effect on the basic characteristics of the underlying resin.

PEROXAN EPC-60 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 60%, Emulsion in water and methanol.PEROXAN EPC-60 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

VALMIERA GLASS® HR-glass is an aluminosilicate glass that is alkali-free and free of boron oxide and fluorine. In some ways, this glass could completely replace E-glass. The thermal resistance of up to 800°C is the most important feature of this type of glass.

Windform® LX 3.0 has improved the already excellent performance of Windform® LX 2.0. These improvements can be noticed from a sinterability standpoint. Windform® LX 3.0 maintains the Windform® LX 2.0’s technical and thermal properties; it is also not electrically conductive. Windform® LX 3.0 is a composite polyamide based material which is reinforced with a new generation glass fiber system. It is a naturally black material and is characterized by good Tensile Strength and stiffness. Windform® LX 3.0 is also characterized by high level of temperature resistance (HDT, 1.82 Mpa is 175,9°C / 348.62 °F). Windform® LX 3.0 has an excellent surface finish in its sintered state; it is perfect for components with fine details. Windform® LX 3.0 is highly recommended for applications that require a strong visual impact and for aesthetical parts. Windform® LX 3.0’s impact resistance properties at room and low temperature are similar. Windform® LX 3.0 is an entry-level material and is perfect for creating functional prototypes or finished parts that require reliability, resistance and aesthetical properties.

MPP is mainly used in PA and PBT, especially PA6, PA66, glass fiber‐reinforced PA6,PA66.Nylon containing .MPP can be used in all kind of injection and extrusion process and meet all kind of processing demands of polyamide, glass fiber polyamide.

Disheng Technology UV absorber UV-360 is a high-efficiency ultraviolet absorber that can absorb 300-400nm ultraviolet rays and is widely compatible with a variety of resins.

BIONOX® 1098 - a sterically hindered phenolic antioxidant, is an efficient, non-discoloring stabilizer for organic substrates such as plastics, synthetic fibers, adhesives, and elastomers, and is particularly effective in polyamide polymers and fibers.

Ketoprix™ EK73 and EKT73 resins are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.

Cleanroom® MB Hydrochloric Acid 37% is a key ingredient to remove surface metallic ions by forming soluble metal chlorides. In semiconductor processing, the presence of metallic impurities on the wafer can lead to early dielectric breakdown.

The virgin base resins of Polyamide 66 have excellent technical properties, a very low specific weight, chemical resistance to solvents (oils, greases and fuels), a very low moisture absorption. The remarkable ease of processing and the high physical-mechanical characteristics allow it to be used in various fields of application, in the automobile sector, in the textile and electrical industry, in the household appliances sector, in mechanics, in furnishings, etc. The excellent recyclability characteristics of Relon A help to preserve natural sources.

Flontech Porous PTFE FT-POR-10 typically applied in chemical, semiconductor, automotive and packaging industry and in the field of filters and sensor (lamda sensor, headlights, injection control, airbag…), where the porous PTFE features are ideal for hostile environments.

GS® 5 Sealant is non-hardening butyl rubber based extruded sealant that forms an immediate bond between plastic, concrete, metal, and wood surfaces in both above and below ground applications.

NIRETAN B F25 M contains special characteristics such as high impact or impact modified.

AZSA 30 002 is used in Chemical industries. Synthesis. Used in manufacture of fertilizers, explosives, paints, lacquers, varnishes and other acids. Metal pickling agent. Agricultural industry. Electrical/electronic engineering industry. Polymers industry. Textile processing industry. Used in manufacture of chlorine dioxide. Lead-acid batteries.

Suqian Unitechem Antioxidant B215 is a compound of 1010:168(1:2).

AMAPLAST® Orange LFP Solvent Orange 60 (Solvent Process) is ABS, Acrylic, PBT, PC, PET, Polyetherimide, and Polystyrene,

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

Videolar 500 is a general purpose polystyrene.

Sinof Hi-Tech P130T Are Excellent Resistance To Sunlight , Excellent Resistance To Chemicals And Solvents , High Wear Resistance, Good Stain Resistance, Good Flame Retardant, Low Permeability For Most Gas And liquid. They also have High Dielectric Strength And Volume Resisance, Good Thermal Stability , High Mechanical Strength At High Temperature and Easy For Processing, Forming And Welding.

Iron Oxide Black HM722B is blackish in color having globular particle shape.

NYPOL® A3 G10 N10 NTLA014 NR514 is a 6.6 polyamide with 10% extra lubricated fiberglass

Cel-Span® FR 680 is a highly loaded 80% concentrate flame retardant tailored for a variety of applications including injection molding and sheet extrusion. Cel-Span® FR 680 was designed to be a cost effective retardant made for polyethylene requirements including the Boston Fire Department Test and the NFPA – 701 small scale test. The use of Cel-Span® FR 680 will result in excellent flame retardancy to pass several flammability requirements. Flame testing has shown that recommended levels between 8% - 25% are intended as guidelines, but optimization is necessary for each application because of the differences between equipment, resin systems, additives and flame retardancy requirements.

GS® 4SC Sealant is a partially cross-linked butyl tape that exhibits aggressive tack to most clean and dry surfaces. This unique self-fusing sealant offers a high cohesive strength, excellent elasticity and weathering characteristics which allows GS® 4SC Sealant to endure expansion, contraction, vibration and joint movement.

PA6 Mineral filler 30% reinforced grade

Superior Graphite 2939APH is a purified flake product manufactured using Superior Graphite’s proprietary electro-thermal purification technology. This continuous high-temperature process exposes flake graphite to extremely high temperatures so that impurities, including inorganic contaminants, are sublimed. 2939APH is the fine size grade of the 'Thermally Purified Flake' product line produced using Superior Graphite’s dedicated milling and screening technology. Main uses are coefficient of friction reduction, wear reduction, coatings and as a relatively inexpensive battery material performance additive.