Products in Terminal Blocks, Plugs & Sockets

Conductive PP basically keeps the general properties, and also it offers good conductivity, weather and thermooxidizing resistance. Conductive PP is used for antistatic and conductive electronic products.

Acculam™ Phenolkraft Paper X/XX comprised of a phenolic resin binder and a saturating kraft (paper) substrate. It qualifies to NEMA X/XX and MIL-I-24768/11/12.This is a general purpose grade with good mechanical and electrical insulating properties. Its versatility, good machining characteristics and lower cost encourage its applications as switch plates, barriers, terminal strips, washers and other electrical components.

Silopren™ Electro 342-15 FR by Momentive Performance Materials is comprised of Silicone Elastomer. It is commonly used It is available in Liquid form.

Pentamid AB S GV50 H black is a low viscosity, heat stabilized polyamide 66+6, 50% glass fiber reinforced.

Errepiemme PPS R40 R is reinforced with 40% glass fiber, an excellent fluidity allows fast cycles for products where rigidity, high chemical and mechanical resistance are required temperatures.

Pentamid A GV30 H TF15 black is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, modified with ptfe.

Pentamid B S GV30 H black is a low viscosity, heat stabilized polyamide 6, 30% glass fiber reinforced.

Sylvin Technologies Sylvin™ 7844-90C White 1601 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain relief this compound has a underwriters laboratories listing as a recognized component.

Pentamid A GV30 H red 3000/2 is a normal viscosity, heat stabilized polyamide 66, 30% glass fiber reinforced, special coloration.

Sylvin Technologies Sylvin™ 7844-70C Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-70 Red 604 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-85 Gray 9632 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Sylvin Technologies Sylvin™ 7844-90C Black is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Ekalon® V, Our PC compound for electrical and relay housings, industrial switchgear and electronics accessories, among other things.

Sollamid B 2700 is the formula for Standard Polyamide. Sollamid B 2710 is the formula with external lubrication.

Pentamid B GV15 H natural is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber reinforced.

Sylvin Technologies Sylvin™ 7844-95 Gray 930 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has an underwriters laboratories listing as a recognized component.

PBT-GF30, PBT, 30% glass fiber reinforced

Flame retardant agent free, Flame retardant

ESTOPLAST EP 1500NNO2 is a Polybutylene terephthalate - unfilled which is a medium viscosity, head lamp bezel and it is used in E-motor components, lightings and lamp fittings, base and cover.

Sylvin Technologies Sylvin™ 7844-80C Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Silopren™ LSR 2345/06 is a electrically conductive two-component liquid silicone rubber for injection molding processes.Key Features and BenefitsVulcanisates consisting of Silopren™ LSR 2345/06 TP 3585 are distinguished by the following properties: electrically conductive excellent thermal stability high stability and flexibility at low temperatures good rubber-like properties outstanding resistance to aging not readily combustible, does not melt or drip Potential ApplicationsBecause of the outstanding properties Silopren™ LSR 2345/06 TP 3585 is particularly suitable for the following elastomeric articles: electrodes, field control elements, cable terminals, cable connectors, high voltage plugs, sealing elements s.o.

S&E Polymer Solutions V-TEM 50 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

A soft, black copper stabilized halogen free flame retardant (HFFR) SEBS based thermoplastic elastomer (TPE) compound with superior UV resistance.

GREATBAY XZ-5300 is a bromine flame retardant.

MAZPOUND NMP is processed by injection method for the purpose of injection of plugs.

Sylvin Technologies Sylvin™ 7844-85 Purple 8526 is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs. This compound has an underwriters laboratories listing as a recognized component.

Pentamid AB S GVB16 H black is a low viscosity, heat stabilized polyamide 66+6, glass fiber and glass bubbles reinforced.

XINOMER® PP HFFR 1408 is a flame retardant booster system that increases the flame-retardant effect in halogen free, flame retardant, thermoplastic compounds even at low addition levels. The HFFR products are available with various base resins for both injection molding and extrusion applications.

Fainplast Compounds Fainplast™ PVC GS 76/TN-UV is a Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Fainplast PVC GS 76/TN-UV include engineering/industrial parts and wire & cable.

DİOKİ EPS F® is white beads contains internal non-HBCD flame retardant additive and pentane as blowing agent. It is not recommend for use in food contact applications. Each bead’s density is 1,05 kg/m³, bulk density is approx. 600 kg/m³ DİOKİ EPS F® is a polymer has high quality, has perfect expansion properties. It is specially produced for the production of incombustible products. It does not include in HBCD.

Sylvin Technologies Sylvin™ 7844-95 Natural is a non ortho phthalate plasticized vinyl compound formulated for injection molding applications such as power supply plugs and strain reliefs. This compound has a underwriters laboratories listing as a recognized component.

Kayflam PC / ABS 192/8020-FR332 are flame retardant engineering plastics. Which is a halogen-free additives. It is available in (25 kg PE valve bag, 1000 kg big bag, 1000 kg octabine).

Pentamid B GV15 MK25 H natural is a normal viscosity, heat stabilized polyamide 6, 15% glass fiber and 25% mineral reinforced.

Pentamid B GV25 H RC black is a normal viscosity, heat stabilized polyamide 6, 25% glass fiber reinforced, recompound.

PA6 moisture conductive DD2 enhances its conductivity, heat resistance and easy to process. Conductive PA6 is used for electronic and electrical products.