Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Electrical & Electronics
Wire & Cable
Power Transmission & Distribution
Products in Power Transmission & Distribution
282 Products found in Power Transmission & Distribution
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
Electric Cable Compounds
SuperOhm® 2502
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1120.0 - 1160.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 3450
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1460.0 - 1460.0 kg/m³
SuperOhm® 3450 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
Excelene 1000
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
Features:
Crosslinkable, High Performance, Cost Effective, Good Electrical Properties
End Uses:
Medium Voltage Insulation, Wires, High Voltage Insulation, Underground Power Cable, Cable Jacketing, Industrial Cable Insulation, Industrial Cable Jacketing, Power Cable Jacketing, Cables
Strain at Break:
420.0 - 420.0 %
Excelene 1000 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.
Electric Cable Compounds
SuperOhm® 2565
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1130.0 - 1170.0 kg/m³
Superohm® 2565 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for operation up to 450F (230C) and 25 kV in appropriate cable construction when extruded and cured consistent with industry standards.
Electric Cable Compounds
SuperOhm® 3749
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1090.0 - 1130.0 kg/m³
Orange polymeric composition in pellet form, based on EPR rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line.
Electric Cable Compounds
CableFill® 300
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Extrusion
Features:
Flame Retardant, Cost Effective, Water Resistant, Good Electrical Properties, High Performance, Excellent Flexibility, Free Flowing, Low Deformation Tendency
Density:
1700.0 - 1760.0 kg/m³
CableFill® 300 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free
Electric Cable Compounds
SuperOhm® 3754
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1170.0 - 1210.0 kg/m³
SuperOhm® 3754 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
SuperOhm® 3753
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1200.0 - 1240.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
SuperOhm® 2560
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1170.0 - 1210.0 kg/m³
Superohm® 2560 is an oil and solvent resistant off-white colorable polymeric composition in pellet form, based on EPDM rubber containing peroxide curing agent, ready for extrusion in a conventional CV or dry cure extrusion line. Cables jacketed with this compound are recognized for balanced properties including excellent heat and deformation resistance at high temperatures, oil resistance, and superior mechanical properties and is suitable for operation up to 450F (230C) in appropriate cable construction when extruded and cured consistent with industry standards.
Electric Cable Compounds
SuperOhm® 240-NL-HE
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1300.0 - 1300.0 kg/m³
Superohm® 240 NL-HE is a RoHS compliant, highly flexible, colorable, polymeric composition in pellet form, based on EPR rubber, containing peroxide curing agent, ready for extrusion in a conventional CV or Dry cure extrusion line. It is formulated to obtain balanced performance characteristics with excellent electrical properties suitable for applications up to 25kV.
Electric Cable Compounds
SuperOhm® 2575
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1180.0 - 1180.0 kg/m³
SuperOhm® 2575 peroxide crosslinkable EPR compounds are designed for high temperature stability and superior electrical performance.
Electric Cable Compounds
AquaGraft® 8020
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Density:
1480.0 - 1480.0 kg/m³
AquaGraft® 8020 is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.The EPR based systems provide improved flexibility while maintaining high performance properties
Electric Cable Compounds
SuperOhm® 3752
Polymer Name:
Ethylene Propylene Copolymer
Processing Methods:
Extrusion
Density:
1180.0 - 1220.0 kg/m³
Off-white colorable, flame retardant, low voltage composition in pellet form, EPDM-rubber based and containing peroxide curing agent, ready for extrusion in a conventional CV line.
Electric Cable Compounds
CableFill® 200
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Extrusion
Features:
Flame Retardant, Cost Effective, Water Resistant, Good Electrical Properties, High Performance, Excellent Flexibility, Free Flowing, Low Deformation Tendency
Density:
1700.0 - 1760.0 kg/m³
CableFill® 200 bedding compound for wire and cable applications is:ExtrudableFlexibleEasy peelFree flowingFlame-retardantHalogen free
Norplex-Micarta
Norplex-Micarta NP613
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Coil Support Plate, Tap Changer, Terminal Panels
NP613 is constructed from electrical grade of kraft paper and a specially modified epoxy resin system. It is designed to be used in tap changers, coil support plates and terminal panels for transformers and their accessories.
Norplex-Micarta
Norplex-Micarta MC511AF
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Aerospace Applications
MC511AF is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include insulation in power generation equipment and other structural applications when used in elevated temperatures. MC511AF is certifiable to MIL-I-24768/3, Type GEB.
Norplex-Micarta
Norplex-Micarta MC511A
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Aerospace Applications
MC511A is a high strength, glass epoxy laminate that is specially formulated to meet power generation producer’s exacting standards where higher strength at elevated temperatures are required. MC511A is certifiable to MIL-I-24768/3, Type GEB, IEC-60893-3-2 EP GC 203 and is halogen free to meet the European restrictions.
Norplex-Micarta
Norplex-Micarta NP643
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
End Uses:
Coil Support Plate, Terminal Blocks, Tap Changer
NP643 is constructed from an electrical grade kraft paper and a high temperature specially modified epoxy resin system. It is designed to be used in tap changers, coil support plates and terminal panels for transformers and their accessories.
EpoxySet Inc.
EPOXICAST™ 1106F-LD
Foam Type:
Syntactic Foam
Density:
749.136 - 749.136 kg/m³
Chemical Family:
Epoxy & Epoxy Derivatives
End Uses:
Capacitor Bushings, Power Transformers, Integrated Circuits
EC-1106F-LD is a low viscosity, easily pourable, epoxy syntactic foam. It features low density, good electrical insulation, and low shrinkage during cure. It is useful for potting and encapsulating components and modules where added weight is undesired but resistance to mechanical and thermal shock are prime considerations. Typical Applications includes potting or encapsulating densely packaged power supplies, integrated circuits, small transformers, capacitors bushings etc.
Norplex-Micarta
Norplex-Micarta MC511FR
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
MC511FR is a high strength, medium weave glass epoxy laminate that retains a minimum of 50 percent of its room temperature flexural strength when tested at 150ºC. Typical applications include structural applications when used in elevated temperatures. MC511FR also complies with MIL-I-24768/28, Type GEB-F. Certification to IEC standard is pending.
Electric Cable Compounds
AquaGraft® 1-6008R
Applications:
Power & Utilities, Electrical Protection, Power Transmission & Distribution
Product Families:
Other Thermoset Elastomers, Thermoset Elastomers
Chemical Family:
Polyethylenes, Polyethylene Cross-Linked (PEX), Polyolefins
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
End Uses:
Wires, Cables, Power Cable Jacketing
AquaGraft® 1-6008R is Polyethylene moisture curable system that allows customers to crosslink polymer systems without investing in expensive curing processes.
EpoxySet Inc.
SILCAST™ SC-550-LV-TC-1
Applications:
Switches & Relays, Consumer Electronics, Power & Utilities
Product Families:
Encapsulants, Adhesives & Sealants
Chemical Family:
Silicones
SC-550-LV-TC-1 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-1 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.
EpoxySet Inc.
SILCAST™ SC-454M-6
Applications:
Switches & Relays, Displays, Consumer Electronics
Product Families:
Encapsulants, Adhesives & Sealants
Chemical Family:
Silicones
SC-454M-6 is a thermally conductive, low viscosity, condensation cure, RTV silicone potting or encapsulating compound. It is readily pourable and can cure at room temperature. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.
EpoxySet Inc.
SILCAST™ SC-550-LV-TC-2
Applications:
Consumer Electronics, Power & Utilities, Adhesives & Sealants
Product Families:
Encapsulants, Adhesives & Sealants
Chemical Family:
Silicones
SC-550-LV-TC-2 is a 100% silicone solid elastomer designed for electronic potting applications. This two-component system offers a hard, self-bonding, thermally conductive, low modulus material that is readily repairable. SC-550LV-TC-2 is highly filled and offers excellent thermal conductivity. It is also offers a convenient mix ratio of 1:1 by weight and volume.
EpoxySet Inc.
SILCAST™ SC-550-LV-RT
Applications:
Switches & Relays, Consumer Electronics, Power & Utilities
Product Families:
Encapsulants, Adhesives & Sealants
Chemical Family:
Silicones
SC-550-LV-RT is a 100% silicone solid elastomer designed for electronic potting applications. This two-component, room temperature curing system offers a hard, self-bonding, thermally conductive, low modulus material that is readily re-workable.
EpoxySet Inc.
SILCAST™ SC-417
Applications:
Consumer Electronics, Displays, Other Devices & Assemblies
Product Families:
Encapsulants, Adhesives & Sealants
Chemical Family:
Silicones
SC-417 is a two-part, low viscosity, clear silicone which will cure at room temperature or at elevated temperatures. The cured elastomer is suited for electrical/electronic potting and encapsulating applications and provides environmental protection. It is readily pourable and can cure from room temperature to 200°C. The cured resin has a very good flexibility with excellent electrical properties and high temperature resistance.
Partners in Chemicals
OMNISTAB® LS 622
Chemical Family:
Hindered Amine Light Stabilizer (HALS)
Functions:
Light Stabilizer, Stabilizer
Compatible Polymers & Resins:
Polypropylenes (PP), Polyethylene Terephthalate Glycol (PETG), Thermoplastic Polyurethane (TPU), Polyethylene Terephthalate (PET), Polyamides, Poly(Methyl Methacrylate) (PMMA), Thermoplastic Vulcanizates (TPV), Polyethylenes (PE), Polyoxymethylene (POM), Ethylene Vinyl Acetate (EVA)
Features:
Good Thermal Stability
End Uses:
Housings, Electrical Components, Cables, Mulch Film, Wires, Fittings, Pipes, Film
Synonyms:
1-(2-Hydroxyethyl)-2,2,6,6-tetramethyl-4-piperidinol-dimethyl succinate copolymer, 4-Hydroxy-2,2,6,6-tetramethyl-1-piperidinethanol-dimethyl succinate copolymer, Dimethyl succinate-1-(2-hydroxyethyl)-2,2,6,6-tetramethyl-4-piperidinol copolymer, Dimethyl succinate-1-(2-hydroxyethyl)-4-hydroxy-2,2,6,6-tetramethylpiperidine copolymer, Dimethyl succinate-2-(4-hydroxy-2,2,6,6-tetramethyl-1-piperidyl)ethanol copolymer, Dimethyl succinate-4-hydroxy-1-(2-hydroxyethyl)-2,2,6,6-tetramethylpiperidine copolymer, Dimethyl succinate-4-hydroxy-2,2,6,6-tetramethyl-1-piperidineethanol copolymer, Dimethyl succinate-4-hydroxy-2,2,6,6-tetramethyl-1-piperidylethanol copolymer, Dimethyl succinate-4-hydroxy-2,2,6,6,-tetramethyl-1-piperidineethanol
OMNISTAB® LS 622 is an oligomeric hindered amine light stabilizer (HALS). Furthermore, it is effective as antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.
Partners in Chemicals
OMNISTAB® UV BP12
Chemical Family:
Benzophenones
Functions:
UV Absorber
Compatible Polymers & Resins:
Polyamides, Polyethylenes (PE), High-Density Polyethylene (HDPE), Linear Low Density Polyethylene (LLDPE) , Ethylene Vinyl Acetate (EVA)
Features:
Good Light Stability
End Uses:
Housings, Flooring, Cables, Mulch Film, Wires, Fittings, Pipes, Greenhouse Film, Film, Glazing
Synonyms:
(2-Hydroxy-4-octoxyphenyl)-phenylmethanone, [2-Hydroxy-4-(octyloxy)phenyl]phenylmethanone, 2-Benzoyl-5-octyloxyphenol, 2-Hydroxy-4-(n-octyloxy)benzophenone, 2-Hydroxy-4-(octyloxy)benzophenone, 2-Hydroxy-4-octoxybenzophenone, 4-(Octyloxy)-2-hydroxybenzophenone, 4-n-Octyloxy-2-hydroxybenzophenone, NSC 163400, Octabenzone
OMNISTAB® UV BP12 is a benzophenone grade. Acts as a UV absorber. Imparts good light stability when used in combination with a hindered amine light stabilizer (HALS).
SACO AEI Polymers
THERMODAN® HF TP812NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
SACO AEI Polymers
THERMODAN® HF TP870BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
SACO AEI Polymers
THERMODAN® HF TP832
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Low Voltage Insulation, Cables
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
iD Additives, Inc. - La Grange, IL
ID Additives, Inc. 6851 iD 35 MFC
Functions:
Foaming Agent
Compatible Polymers & Resins:
Styrene Acrylonitrile (SAN), Polypropylenes (PP), Polyethylenes (PE), Polyethylene Terephthalate (PET), Thermoplastic Polyolefins (TPO), Thermoplastic Elastomers (TPE), Polyurethanes (PU), Polystyrenes (PS), Acrylonitrile Butadiene Styrene (ABS), High-Impact Polystyrene (HIPS)
Processing Methods:
Injection Molding, Extrusion Blow Molding (EBM), Film Extrusion
End Uses:
Wires, Rigid Packaging, Flexible Packaging, Cables, Rigid Films, Cosmetic Packaging, Film
Labeling Claims:
Non-Flammable
Micro Fine Cell foaming agents were developed specifically to produce a Micro Fine Cellular structure with the uniform distribution the cells on a consistent basis throughout the production cycle. Micro Fine Cell foaming agents are available as Endothermic or Exothermic foaming agents pelletized in the iDPel carrier compound.
SACO AEI Polymers
THERMODAN® HF TP812BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, Carbon Black
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
Polymer Dynamix
EverGlide® MB350
Functions:
Lubricant (Internal), Lubricant (External)
Chemical Family:
Silicones
Labeling Claims:
Food Contact Acceptable
Compatible Polymers & Resins:
Polypropylenes (PP), Polyethylenes (PE)
Carrier:
Resin-based, Linear Low Density Polyethylene (LLDPE)
EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.
SACO AEI Polymers
THERMODAN® HF TP832BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Wires, Cables
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
Norplex-Micarta
Norplex-Micarta RT628H
Polymer Name:
Phenolic Compound
Physical Form:
Tube
Density:
1230.0 - 1230.0 kg/m³
Features:
Low Moisture Absorption, Good Machinability, Dimensional Stability, Heat Treated
Being a heat treated version of RT628, RT628H is an improved machining grade meeting NEMA XX for tubes. It has low moisture absorption and good dimensional stability. Typical applications are as a replacement for RT629 where improved machining characteristics are needed. The primary application is in transformers. Certification to IEC standard is pending.
Show
36
of 282 results
Go to page
1
2
3
4
5
6
7
8