Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Self-Bonding, excellent Adhesion to many plastics and metals
- Easy to use 1:1 mix ratio by weight or volume
- Long pot life at Room Temperature
- Excellent Thermal cycling stability
Applications & Uses
- Applications
- Application Area
- Typical Application
Potting and encapsulating of:
- Equipment modules
- Power supplies, relays and amplifiers
- Transformers, coils and ferrite cores
- Fiber optic wave guide coatings
- Encapsulation of circuit boards
- Instruction for Use
1. Stir well the contents of each container every time before removing material.
2. Weigh each 100 grams of PART-A to 100 grams of Hardener PART-C.
3. Mix until uniform. Scrape the sides and bottom of container repeatedly during mixing.
4. Apply to clean bonding surfaces and cure as recommended to achieve the desired properties.
5. Typical cured properties were determined using recommended cure schedule. Some difference in properties may occur with the alternate or other cure schedules.- Industrial Usage
Practices of good housekeeping, safety and cleanliness should be followed before, during and after use.
Properties
- Color
- Typical Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Mix Ratio by Weight (PART A/PART C) | 100/100 | — | — |
Mixed Viscocity (at 25°C) | 20000 - 25000 | cPs | — |
Pot Life (500 grams at 25°C) | 2 - 3 | hours | — |
Cure Option (at 70°C) | 2 | hours | — |
Cure Option (at 100°C) | 20 | minutes | — |
Cure Option (at 25°C) | 24 | hours | — |
Value | Units | Test Method / Conditions | |
Specific Gravity | 1.8 | — | — |
Hardness | 60 | Shore A | — |
Tensile Strength | min. 300 | psi | — |
Elongation | 80 | % | — |
Thermal Conductivity | 1.2 | W/m °K | — |
Service Temperature Range | -55 to 205 | °C | — |
Dielectric Strength | 17.5 | kV/mm | — |
Dielectric Constant (at 1 kHz) | 6 | — | — |
Dissipation Factor (at 1 kHz) | max. 1.0 | — | — |
Volume Resistivity | min. 1.0x10^4 | Ω-cm | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Warning
Adequate ventilation of workplace and ovens is essential. These materials may cause injury to the skin following prolonged or repeated contact and dermatitis in susceptible individuals. In case of skin contact, wash thoroughly with soap and water. For eyes, flush immediately with plenty of water for at least 10 minutes and seek medical attention.
Packaging & Availability
- Packaging Type
- Available Packaging
Packaged in 1-gallon, 5-Gallon and 55-Gallon size
Storage & Handling
- Shelf Life
- 1 Year